diijkstra
6b64534f40
WEB: Display single RX LOS
...
As sugested, lets display single value, and raise alarm when pin
is different than module.
2026-03-14 13:15:01 +01:00
diijkstra
1f6e07a1af
Web: Add SFP state/pin status
...
The state of the SFP module is being already send in status.json,
but was not parsed via Web UI. When debuging SFP LOS/Signal detection
it is usefull to see what module is reporting back.
Extended the SFP mouse-over information with:
- RX LOS as reported in 0x02 bit of register 238
- External TX Disabled from 0x80 bit of register 238
- TX fault from 0x04 of the same register
- The last state of RX LOS pin (available also when there is no 0x40
option on the module)
This should help identify missing/incorrect setup of TX disabled pin.
2026-03-13 23:56:43 +01:00
logicog
fa37940075
Control xhttp concurrency
2026-03-10 06:16:18 +01:00
logicog
20fb626cc1
Make bandwidth control page accessible
2026-03-08 20:55:50 +01:00
logicog
31a488e4e9
Add web page for bandwidth control
2026-03-08 20:55:50 +01:00
chriz
0e2a5fb7bc
Reload startup config after save.
2026-02-14 11:02:05 +01:00
chriz
d5019b41df
Add warning for advanced safe.
2026-02-13 10:32:23 +01:00
chriz
eae7f10d7a
Make Advanced configuration tabbed.
2026-02-13 08:43:48 +01:00
chriz
ea37126e87
New apporach: Make startup config independent.
2026-02-12 14:17:22 +01:00
TylerDurden-23
1d91c1bf2c
Merge branch 'logicog:main' into opt-system-settings
2026-02-11 21:15:56 +01:00
chriz
0099c2a03a
Fix no 10Mbit link speed shown. Determine link state and speed seperately. Additional handling for port > 8.
2026-02-09 20:16:57 +01:00
TylerDurden-23
97b46071e0
Merge branch 'logicog:main' into opt-system-settings
2026-02-06 10:50:46 +01:00
chriz
5a11515c36
Improve firefox compatibility.
2026-01-27 14:59:57 +01:00
chriz
934014c68c
Label rename.
2026-01-26 23:42:36 +01:00
chriz
5662285a3e
Clear command log after saving.
2026-01-26 23:29:23 +01:00
chriz
b5c249995f
Add startup config editor.
2026-01-26 20:40:30 +01:00
chriz
b2514bf176
Rename and auto select.
2026-01-25 22:04:59 +01:00
chriz
c36136047c
Add support for configuring PVID on VLAN page.
2026-01-25 22:04:05 +01:00
logicog
e53f5e7134
Add L2 entry deletion support via web
2026-01-17 12:56:43 +01:00
logicog
3509f7da04
Add web functionality to delete L2 entries
2026-01-16 18:04:22 +01:00
logicog
55d10ae3fc
Make L2 information page available in navigation menu
2026-01-16 18:04:22 +01:00
logicog
e0c9338357
Add support in web-interface for displaying L2 entries
2026-01-16 18:04:22 +01:00
logicog
f33c4e3dc9
Add display of MIB counters to Web-Interface
2026-01-15 18:07:56 +01:00
logicog
34a0e2d338
Right align speed option selection
2025-12-25 09:46:59 +01:00
logicog
3af63af4a4
Add MTU setting in web-page
2025-12-23 13:04:34 +01:00
logicog
51345a07e6
Add mtu support in http server
2025-12-22 23:28:50 +01:00
logicog
67439efd2b
Correctly display 9-port machines
2025-12-22 23:28:50 +01:00
logicog
36d5ee3ddd
Add port speed page
2025-12-22 23:28:50 +01:00
logicog
dc9bc5ec7d
Add SFP data to send_basic_info
2025-12-17 06:44:09 +01:00
logicog
12db61faf7
Add tooltips
2025-12-17 06:43:28 +01:00
logicog
b442417a8a
Add tooltips for ports
2025-12-16 20:08:47 +01:00
logicog
87717a0790
Move drawing of ports into main.js
...
This reduces the number of .js which are pulled by the browser
when loading a http page, which should reduce the loading time.
Also prepare for device-dependent logical to physical port
mappings.
2025-12-16 20:08:47 +01:00
logicog
3c869e927a
Add support for 10G 500M and 5G speed display
...
This adds the speed status display of other link speeds:
100M 500M 1000M: Green 2nd LED
2.5G, 5G, 10G: Orange 2nd LED
2025-12-08 08:39:54 +01:00
logicog
94b6688e57
Correctly use physical port in mirror configuration
2025-12-05 07:38:16 +01:00
logicog
6557fc53e5
Add LAG configuration web-page
2025-12-05 07:38:16 +01:00
logicog
4b2d7002dc
Add physical/logical mapping of ports
2025-12-05 07:38:16 +01:00
logicog
4e4e6a55ba
Redirect to login page when status request not authorized
2025-12-01 18:26:46 +01:00
logicog
a8a770f27f
Add login page and style
2025-11-29 12:44:23 +01:00
logicog
00a415c755
Add filtering logic for configuration commands
2025-11-29 12:44:23 +01:00
logicog
ba9bc2e845
Initial web-files for system settings and configuration management
2025-11-29 12:44:23 +01:00
René van Dorst
aa406e1d98
html: firmware selection: limit extension only to .bin
...
This makes it quicker to select firmware image from the output directory.
You can still select at File type "All Files" if the extention is diffrent.
2025-10-30 21:30:37 +01:00
logicog
f93cfd467f
Use better css elsewhere
2025-10-29 15:39:47 +01:00
logicog
5622f1c843
Add Mirroring web-pages
2025-10-29 15:39:47 +01:00
logicog
e5f5955f71
Add timeouts to XhttpGet requests
2025-10-22 08:05:44 +02:00
logicog
df1cd62518
Add EEE style and navigation
2025-10-20 18:35:35 +02:00
logicog
aab4d334e5
Formatting fix
2025-10-20 18:35:35 +02:00
logicog
73b8335bef
Add EEE html page
2025-10-20 18:35:35 +02:00
logicog
1a0ad07367
Remove superfluous head tag and move final script tag into body
2025-10-10 20:06:45 +02:00
logicog
09ba7859b6
Add navigation.js sidebar
2025-10-10 18:27:24 +02:00
logicog
39a22fd926
Use consistent navbar for all pages, save space used in HTML for this
2025-10-10 18:18:42 +02:00
diijkstra
logicog
chriz
TylerDurden-23
René van Dorst