The pointer is masked when it advances over the command text, then
incremented once more for the newline without masking, so it can come to
rest one past the end of the ring.
Both readers walk from the pointer with their own index masked every
step, so an index that sits outside the ring is never reached and the
walk does not end. `history` on the console spins there, and so does
`/cmd_log`, which the web page fetches whenever settings are saved: it
fills the transmit buffer and keeps going past it.
make clean left tools/output in place, so the host tools were never
rebuilt after a clean. SUBDIRSCLEAN, which builds the per-directory
clean target names for exactly that purpose, was defined but nothing
consumed it. Give clean and distclean those targets as prerequisites
and add the rule that runs the subdirectory's own clean, which
tools/Makefile already provides.
Generate wrong address for `a4` location.
Both on read from and write to a __sfr32 variable.
Workaround:
Use two __sfr16 instead of one __sfr32.
We still get some optimalizations / better code gen.
The preamble scan cursor and the buffered-length parameter carry no
state between calls, so they do not need static xdata slots. As plain
locals the compiler places both in registers, trimming 64 bytes of
BANK1 code and two bytes of xdata.
The offsets shared by config_take() stay static: direct data space is
fully allocated on machines like the SWTGW218AS, so plain locals there
add overlay bytes that no longer link, and xdata-class locals spill
three temporaries into direct space while growing the code by roughly
120 bytes. Document pre_acc, whose accumulation across TCP segments is
why it must remain global.
A firmware upload previously ended in a silent connection close, leaving
the client unable to distinguish a verified upload from a failed one.
Send an explicit 200/400 verdict with the CRC result, with
Content-Length so the browser completes the response before the reset,
and only reset the chip once the verdict has been fully ACKed.
The unconditional close after a config upload is gone since the
buffered config path answers with its own response, so drop the
now-unreachable close hack from the streaming path.
A firmware image cannot be buffered whole, so the upload is streamed to
flash, and stream_upload() already resumes across TCP segments. The
multipart preamble did not: handle_post() walked the part headers from the
start of whichever segment it held, so a client that split inside the
octet-stream part header lost its place, never started streaming, and the
request hung. Firefox splits exactly there, right after filename=".
Buffer the multipart body only until the octet-stream part header is
complete, locate the payload, then stream from that point; later segments
stream as before. The header reuses the configuration buffer, which is idle
during a firmware upload, so no extra memory is needed.
All entry points are already __banked and none of the code runs in
interrupt context, so the module can leave the resident bank. This
relieves pressure on bank 0, which no longer fits a machine with a
custom init table.
Removing the CPU-port support, As stated in #334, it is not needed to
manual add the CPU-port to any command. Because the CPU-port should be
added automatilly when CPU-port is needed.
Refactor cmd_parse_port() because port number is only 1 byte.
This simplifies the parsing code.
Refactor cmd_parse_port_separator() to ensure the return size is correct.
cmd_parse_port_separator() parse the full port number and checks that the
number end with a NUL of space.
Now this function can also be used to parse the last argument number
because this ends with a NUL.
Also refactor code.
d00f
logicog
René van Dorst
bloqaudio
feelfree69
donbernhardo