gitproxy/RTLPlayground
1
0
Fork 0
mirror of https://github.com/logicog/RTLPlayground.git synced 2026-08-30 14:52:51 +08:00
Code Issues Packages Projects Releases Wiki Activity
1,052 Commits 9 Branches 1 Tag
1ed8b131bc4a6f1949f93d83fead9925cfe49e9f
Commit Graph
1052 Commits
This Branch
This Branch
All Branches
Author SHA1 Message Date
René van Dorst bfab8cbba3 Rename MACHINE_SWGT024_V2_0 to MACHINE_SWGT024_V2_0_MANAGED. 
So we can support other versions too.
 2026-03-29 16:13:38 +02:00
René van Dorst eedb0dec01 SWGT024 v2.0: Fix LED and RESET defines for managed version 
Original firmware used for RJ45:
* Amber leds only for 2.5GBit link/act.
* Green leds only for other speeds.
 2026-03-29 16:13:36 +02:00
logicog 08ad843c56 Merge pull request #184 from vDorst/rename_led_28 
Rename LED_28 to LED_28_SYS.
 2026-03-29 07:50:27 +02:00
Jan Hoffmann 05693f5171 Also show SFP TX/RX power in dBm 2026-03-29 00:33:48 +01:00
Jan Hoffmann 6eaa1985aa Fix SFP diagnostic monitoring data in web interface 
If the module is not internally calibrated, it is necessary to apply
calibration values to get meaningful results.
 2026-03-29 00:33:48 +01:00
Jan Hoffmann 45ba32f65d Fix scaling for power values in SFP diagnostics 2026-03-29 00:33:48 +01:00
Jan Hoffmann 0b4f59483b Don't write SFP options value twice in status JSON 2026-03-29 00:33:48 +01:00
René van Dorst 385c850d2f add comments 2026-03-28 21:40:43 +01:00
René van Dorst cdbc48f2c2 Rename LED_28 to LED_28_SYS. 
So it clear that led 28 is the SYSTEM LED.
 2026-03-28 19:29:49 +01:00
Jan Hoffmann efe0c282ba Fix I2C access code 
While the current implementation works for what it is actually used, it
is broken when trying to do larger transfers.

The length field in the control register has a size of 4 bits. In every
transfer, length+1 bytes are read. Thus, each transfer is limited to a
maximum of 16 bytes. Add a check for the length, and write the correct
value to the register.

Also update the loop in "sfp_send_data" to properly increment the output
register. Remove the unused special case for a length of 128 bytes.
 2026-03-28 18:14:15 +01:00
René van Dorst 54fced05b0 Merge pull request #178 from bennydiamond/Support_ZX_SWTGW215AS 
Add support for PCB-SWTG115AS-V2.0
 2026-03-28 13:16:07 +00:00
bennydiamond b64dfd8c25 Correction on IO mappings 
Add further clarification on mapping assumptions
 2026-03-27 20:56:09 -04:00
bennydiamond 5f1cd4cce0 Update documentation 2026-03-27 19:34:39 -04:00
bennydiamond 7ffd0c25c2 Support for PCB-SWTG115AS-V2.0 
Marketed as Lianguo ZX-SWTGW215AS
 2026-03-27 19:34:39 -04:00
René van Dorst 8b4e09ad69 Merge pull request #181 from janh/improve-1g-sfp-compat 
Improve compatibility with 1G SFP modules
 2026-03-27 22:58:30 +00:00
René van Dorst 34d53dddf2 Merge pull request #179 from bennydiamond/Early_boot_wipe_config 
Wipe config if button held at boot
 2026-03-27 20:05:55 +00:00
René van Dorst ec5f655bba Merge pull request #180 from janh/k0501w-rename-version 
Rename K0501W to include PCB version
 2026-03-27 19:52:29 +00:00
René van Dorst 7291f38e46 Merge pull request #182 from janh/commands-newline 
Make sure that the output of all commands ends with a newline
 2026-03-27 19:05:29 +00:00
Jan Hoffmann c3b99fdcdf Make sure that the output of all commands ends with a newline 2026-03-27 19:36:14 +01:00
Jan Hoffmann 9f800bae01 Improve compatibility with 1G SFP modules 
Some modules report a nominal signaling rate of 1200 MBd.
 2026-03-27 17:56:40 +01:00
logicog df498b0879 Merge pull request #173 from diijkstra/vlan_console 
Console: Add Ingress type & VLAN show table
 2026-03-26 21:02:33 +01:00
Jan Hoffmann 03422463e4 Rename K0501W to include PCB version 
It seems very likely that other versions are not compatible, so make it
clear by including it in the machine type and name. Also update the
documentation.
 2026-03-26 19:59:06 +01:00
bennydiamond 2bfbe5358b LED pattern definition on early boot reset 
LED Double blink while button is held

FAST blink for 3 seconds when config is reset
 2026-03-26 12:31:20 -04:00
TylerDurden-23 3bb89bfb80 Merge pull request #177 from janh/k0501w 
Add support for K0501W boards
 2026-03-26 10:12:32 +01:00
bennydiamond dba3679e2f Wipe config if button held at boot 
Blocking by design to prevent loading config

Button must be held between 10 and 30 seconds to trigger reset.

If held more than 30 seconds, boot normally. This is to prevent lock-up in case of weird hardware variants.
 2026-03-25 23:15:04 -04:00
Jan Hoffmann f331a6129a Add support for K0501W boards 
This board appears for example in the Davuaz Da-K6501W switch, and is
designed similarly to Hi-K0402WS.

However, it only has one SFP port and another 2.5G copper port using
RTL8221B 2.5G PHY instead. Also, some components on the board, like
additional LEDs, mode switch, and second flash chip are not populated.

Like earlier revisions of the K0402W(S) board, there is no UART, so
debugging is limited.

As this is an unmanaged switch, installation needs a flash programmer.
 2026-03-25 19:31:14 +01:00
logicog 877e5a68fb Merge pull request #176 from janh/improve-2500m-sfp-compat 
Improve compatibility with 2.5G SFP modules
 2026-03-24 18:13:27 +01:00
Jan Hoffmann ed6c95e522 Improve compatibility with 2.5G SFP modules 
Some modules might report a nominal bitrate of 2500 Mbd or 3200 Mbd
instead of 3100 Mbd. Accept the entire range to make them work.
 2026-03-24 15:26:29 +01:00
diijkstra cb8d0e45bb Review: Move w initialization 2026-03-23 19:31:06 +01:00
TylerDurden-23 877b16e837 Merge pull request #174 from logicog/fix_vlan_display 
Fix display of VLANs for ports
 2026-03-22 18:20:33 +01:00
logicog fce64ac368 Fix display of VLANs for ports 2026-03-22 13:45:42 +01:00
logicog dd9e5c8ff8 Merge pull request #172 from diijkstra/trendnet 
Document firmware upload via CLI
 2026-03-22 05:26:45 +01:00
diijkstra f7fcf0eda7 Console: Add Ingress type & VLAN show table 
Added new `vlan show` command to dump current VLAN settings.
Supports printing PVID & ingress filtering per port.

Added new `ingress [p]<mode>` command to setup ingress filtering.
Added wrappers for enabling/disabling vlan filtering. Currently
not configurable, but state in console is read via ASIC registers.

Full VLAN dump & web support of new commands will be added later.
 2026-03-21 12:29:26 +01:00
diijkstra 905cf38f1f Trendnet: Another mapping fix 
Physical to logical mapping was reverted for SFP ports.
 2026-03-21 12:22:36 +01:00
diijkstra b0370f7bb3 Doc: Describe how to upload firmware via CLI & HTTP 
Rough explanation how to upload a new firmware. Probably, we should
support basic auth on upload for easier use, but lets document
what we have.
 2026-03-21 12:22:36 +01:00
logicog d21d269d49 Merge pull request #152 from mmmspatz/mspatz/fix_vlan_page 
Fix "Get Configuration" on vlan.html
 2026-03-19 11:36:59 +01:00
feelfree69 cb81f82cf6 Merge pull request #170 from logicog/fix_bank0 
Fix missing assignment of bank when html_data.c code is generated
 2026-03-19 11:23:07 +01:00
logicog 59e7a21955 Merge pull request #159 from diijkstra/web_sfp_state 
Web: Add SFP state/pin status
 2026-03-19 05:22:24 +01:00
logicog c530ec4ae3 Fix missing assignment of bank when html_data.c code is generated 2026-03-18 08:34:26 +01:00
TylerDurden-23 8e2b48ef25 Merge pull request #167 from logicog/browsser_trouble 
Fix browser issues with Chrome and latest Firefox
 2026-03-17 10:29:02 +01:00
logicog 65f094c1d1 Merge pull request #163 from feelfree69/parser_fix 
fix crash
 2026-03-16 17:51:24 +01:00
logicog 090283d538 Add retry mechanism for xhttp requests to make Chrome happy 2026-03-16 17:32:50 +01:00
logicog 7e3a0f5d8f Allow javascript to modify svg styles for Firefox version >140 2026-03-16 17:32:15 +01:00
feelfree69 4706f6232a simplify parsing code 2026-03-15 15:43:34 +01:00
diijkstra b47a868db3 Web: Handle missing LOS pin 
When device has no LOS pin and module has no extended status, the
RX LOS value will not be shown. When both are present, the equality
check is performed. When only one is present, the present value
will be shown.

json from the switch, will still contain the field, but can be
null for when pin is not available.
 2026-03-15 12:18:02 +01:00
feelfree69 454eb28bce Merge branch 'logicog:main' into parser_fix 2026-03-15 08:58:15 +01:00
logicog dc283bc724 Merge pull request #165 from feelfree69/bank0_overflow 
Fail building image on BANK0 overflow
 2026-03-15 07:39:38 +01:00
feelfree69 a001cd3da7 Fail also on BANK0 overflow 2026-03-14 22:15:33 +01:00
feelfree69 e92b4a2358 Don't allow partial commands 2026-03-14 19:47:56 +01:00
René van Dorst 47c5443f0e Merge pull request #164 from TylerDurden-23/fix-1gbaset-sfp 
Fix 1GBase-T SFP module not working on serdes port 1.
 2026-03-14 17:03:05 +00:00