The helper landed between that comment and the function it describes, so the
comment now reads as if it belonged to name_char(). Moving the helper up puts
the two back together. The generated code is unchanged.
gcc flags the else whose only statement is dbg_string(), because that macro
expands to nothing unless DEBUG is on, leaving the branch with an empty body.
The line is older than this branch; the bench is simply the first thing that
compiles httpd.c with a host compiler and -Wall -Wextra.
Turn warnings into errors in the test Makefile too, so the next one is caught
where it appears instead of scrolling past. It is the only warning the four
test binaries produce, so nothing else has to change.
Drives the unmodified httpd.c and uip.c through a handshake and a GET
from a client that moves its receive window, and compares the bytes that
reach the wire with the file they are meant to carry. The served file
holds a position-dependent pattern, so a repeat or a gap is reported at
its offset rather than as content that differs somewhere.
The first scenario holds the window still and must pass: it is the check
that the bench itself is sound, before the two moving-window scenarios
are believed.
uip_mss() is the limit on the next segment, not a record of the last
one: uIP recomputes it from the window the peer advertises in every
incoming segment, before the application is called. The ACK path
subtracted it from slen and added it to o_idx, and the retransmit path
handed it to uip_send(), so whenever the window moved between a segment
going out and its ACK coming back, the file being served lost or
repeated the difference. A window shrinking from 1460 to 600 between the
two repeats 860 bytes under fresh sequence numbers, which a browser
writes into the file; a window opening the same way skips 860.
Remember the length in tx_send() and use it in both places. The
retransmit path then repeats exactly the segment uIP still counts as
outstanding, which is what uip_connr->len makes it put on the wire.
uip_appdata is void *, so p - uip_appdata subtracts pointers of
different types. SDCC accepts it, C does not, and no host compiler will
build the file for a unit test. Cast to the type the byte count is meant
in; the generated firmware code is unchanged.
The vendor, model and serial strings are filtered while the EEPROM read
fills the buffers, so the page copies them out as they are. NUL still
ends a string, so a field shorter than its slot reads the same as before.
The three loops in send_status() become one call each. strcpy() cannot
return the length: rtl837x_common.h hides that prototype under
RTLP_HOST_TEST so host builds take the C library version, and a call
that adds its result to slen does not compile there. A small static
helper does the copy instead, and bank 1 drops by 96 bytes.
The console, POST /cmd and the saved config all go through the command
parser, so one filter there covers every way a name can be set. The
hostname already did this inline; port and VLAN names now do it too.
The SFP strings still need escaping on the way out: they come from the
module's EEPROM, not from a command.
A port named NAS"1 made status.json unparsable, so the page stopped
loading, and the name survives a reboot in the saved config. VLAN names
and the SFP strings have the same problem.
They now go through a helper that replaces ", \ and non-printable bytes
with a dot, the way the hostname is already sanitized on ingest. The
length does not change, so the size checks still hold.
The helper also covers the 0xa0 byte that send_sfp_info() skipped as a
special case, so that check is gone.
Compiling these two files for the host turns up warnings that SDCC does
not print: four places mix & with | and two mix && with ||, and l2_delete
keeps a counter it never reads. The parentheses only say what the
compiler already does, so the generated code is unchanged.
counter_to_html() reads the SFRs directly for the zero test, which saves
14 bytes of bank 1.
page_impl.c and rtl837x_port.c are linked together over the simulated
engine, so /vlan.json, /vlanlist and /l2.json are checked against what
vlan_create, pvid and the L2 table hold, through the same bytes the switch
would. The L2 walk is driven the way the web page drives it, page after
page until an index repeats, which is also where the repeat of the first
entry is pinned down as the wrap marker the page relies on. The counter
test fails on the code before the previous commit.
send_status wrote the high and the low word of a packet counter one after
the other, each without its leading zeros. That reads fine until a port
passes four billion packets; from then on a low word of 5 prints as "0x15"
next to a high word of 1, and the rates the page derives from the
difference between two readings jump around. send_counters already padded
the low word, so both now share one helper that pads it only when the high
word is set, which also drops the leading "0" the counters page used to
print in front of every small value.
The switch is reached through four register functions and the SFR_DATA
registers, so a flat register file behind them is enough to run the table
code on the host. A few addresses are live: writing TBL_CTRL with EXECUTE
performs the VLAN or L2 operation at once and clears the bit, STAT_GET
fetches a counter, L2_TBL_FLUSH_CTRL drops entries. Nothing ever reports
busy, so a polling loop runs once and the tests say nothing about what
happens when hardware stalls; that question was settled elsewhere.
The header states the VLAN and L2 entry layouts on its own, so a test can
hold what rtl837x_port.c writes against a second reading of the same bits
rather than against itself. The first suite does that for the VLAN entry,
the PVID register two ports share, the static multicast and management
entries, the per-port flush and the trunk registers. Two stub headers stand
in for the ones a firmware build generates, so the harness needs no SDCC
build first.
Two things kept every register-driven module out of the host harness. The
SFR keywords were unknown, so rtl837x_sfr.h did not compile at all, and once
it did, each translation unit would have defined its own copy of the
registers. They map to extern declarations now; a mock emits the storage
once by re-including the header with the keywords redefined.
The other was memset. rtl837x_common.h hides the firmware's own prototypes
under RTLP_HOST_TEST so host builds use the C library, but nothing declared
the library versions, and the modules do call them. The shim pulls in
string.h ahead of everything, where nothing can clash with it.
The messages said Error: themselves, or usage:, or nothing at all.
cmd_error() prints the prefix now, so every rejected command answers the
same way and the strings only carry what is specific to them.
Two messages that started with Error or refusing are reworded so the
prefix does not read twice. The syslog usage text becomes one string
instead of three calls.
run_cmd_body() answers POST /cmd with 400 when err_status is set, but
only the tokenizer set it. Every "Error:", "Invalid ..." and "Unknown
command" from the parsers went back as 200, so the web page reported the
command as applied, and save_cmd put the rejected line into the command
history, from where Save to flash wrote it into the startup config.
Set ERR_INVALID_ARGUMENT on every path that rejects a command: the err:
labels of the parsers, the parsers that print their own error, the
stp parser and the unknown command fallback. Warnings that still apply
the command, such as a full VLAN name table, are left alone.
Record a command in the history only when it was accepted, and let
execute_commands() report the first failure of a multi-line body, since
cmd_tokenize() clears err_status again for every following line.
The workflow only ran on push, so a pull request opened from a fork
never got a build, and neither did the host-side unit tests that run in
the same job.
session_id is cleared at boot and only a successful login fills it in,
while the uptime counter and last_session_use both start at 0. For the
first SESSION_TIMEOUT seconds after a start, a request carrying an empty
"Cookie: session=" therefore passes is_word_x(session, session_id) and
is treated as logged in, which is enough for /cmd, /config and /upload.
Only look at the cookie once a session has been handed out.
flash_read_security() ends its loop the same way flash_read_bulk() did
before the previous commit: only through comparisons with 1, 2, 3 and 4. A length of
zero matches none of them, the following subtraction wraps on uint16_t
and the loop keeps printing until the counter comes back down to 4.
No caller passes zero today, since the only one is the CLI with a
constant length of 40, but the bound belongs in the function rather
than in whoever calls it.
flash_read_bulk() ends its copy loop only through the comparisons
len == 1|2|3|4, so a length of zero matches none of them. The
following len -= 4 wraps on uint16_t to 65532 and reaches 4 only
after 16384 iterations, writing 65536 bytes to the destination and
overwriting the whole XDATA space.
send_config() gets there with valid_len 0 whenever the stored
configuration begins with a NUL byte, which is the state left by
uploading an empty configuration file. Every later request for the
configuration page then clears the management VLAN and the STP
flag and replaces the host address, while the switch keeps running
and keeps forwarding traffic.
The harness builds with the gcc the workflow already installs and runs
in under a second, so it goes before the SDCC steps and fails the build
first when a host-visible regression lands.
The firmware counts every authenticated request as session activity, and
the page polls the status every 2.5 s, so an open tab never let the
session expire. Track the last mouse, key, touch or wheel event and treat
the page as hidden once ten minutes have passed without one: the pollers
keep ticking but send nothing, the session times out in the firmware as
it did before, and the next input resumes polling, which meets the 401
and returns to the login page.
Building the firmware headers on the host showed two warnings from
machine.h: `typedef struct machine { ... };` and the same for
machine_runtime declare no alias, so the keyword only draws "useless
storage class specifier in empty declaration". Every user says
`struct machine`, so drop the keyword.
-Wno-builtin-declaration-mismatch is a gcc switch and clang reports it
as an unknown option on every build; add it only when the compiler is
not clang.
Compile selected firmware translation units unmodified under host gcc with
AddressSanitizer and UBSan, force-including a shim header that erases the
SDCC 8051 keywords, and link them against a mocked serial ring and console.
A first suite covers the CLI line editor: line entry, backspace editing,
and both long-input overflow cases (length cap and ring-pointer stall).
The only firmware-source change is one #ifndef RTLP_HOST_TEST block in
rtl837x_common.h grouping the libc-named prototypes (sleep/memcpy/memset/
strlen/strcpy/strcmp) so host builds take them from the C library instead;
on-target builds are unaffected.
Run with: make -C test
d00f
René van Dorst
Sylwester Petela
Rob Emery
Rob Emery
bennydiamond
SkullyDev
gnacho
bloqaudio