updated docs and corrected led mapping

This commit is contained in:
Andreas Erhard committed 2026-10-05 00:43:25 +02:00
1 parent 177fb76e1b
commit fa632cdc6e
3 files changed
+80 -79

No files matched your search

+12 -6
View File
@@ -936,15 +936,15 @@ __code const struct machine machine = {
};
#elif defined MACHINE_ONT_S207CW_62TS_SE
// ONT-S207CW-62TS-SE and Binardat 2G06-04210GSM
// ONT-S207CW-62TS-SE, Binardat 2G06-04210GSM (managed), Binardat 2G06-04210GS (unmanaged)
// RTL8372N, 4x2.5G RJ45 + 2x10G SFP+, GD25Q128E (16MB)
// Port mapping: reversed RJ45 ports
// Custom configuration with correct port order and LED colors
// Physical ports: 1-4 = RJ45, 5 = SFP (SDS0), 6 = SFP (SDS1)
// Logical ports: 3 = SFP (SDS0), 8 = SFP (SDS1)
// RJ45 ports: logical 4->phys 4, 5->phys 3, 6->phys 2, 7->phys 1
// Logical ports: 3 = SFP (SDS0), 4-7 = RJ45, 8 = SFP (SDS1)
// Port mapping: Phys 1->Log 7, 2->Log 6, 3->Log 5, 4->Log 4, 5->Log 3, 6->Log 8
__code const struct machine machine = {
.machine_name = "ONT-S207CW-62TS-SE / Binardat 2G06-04210GSM",
.machine_name = "ONT-S207CW-62TS-SE / Binardat 2G06-04210GSM / Binardat 2G06-04210GS",
.isRTL8373 = 0,
.min_port = 3,
.max_port = 8,
@@ -969,7 +969,7 @@ __code const struct machine machine = {
.reset_pin = GPIO_NA,
.high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 1, 0, 0, 2, 2, 1},
.port_led_set = { 0, 0, 0, 3, 0, 0, 2, 2, 3},
.mac_flash_offset = 0x1FC000,
.led_sets = {
{
@@ -990,6 +990,12 @@ __code const struct machine machine = {
LEDS_DUPLEX, // LED 2
0 // LED 3
},
{
LEDS_10G | LEDS_LINK | LEDS_ACT, // LED 0 (green): 10G (SFP Port 6 swapped)
LEDS_2G5 | LEDS_1G | LEDS_LINK | LEDS_ACT, // LED 1 (orange): 2.5G/1G (SFP Port 6 swapped)
LEDS_2G5 | LEDS_LINK, // LED 2
LEDS_COL | LEDS_DUPLEX // LED 3
},
},
.led_mux_custom = 1,
.led_mux = {