Merge branch 'main' into fix/cpu-vlan-init

.github/workflows/build.yml

@@ -20,7 +20,7 @@ jobs:
           apt install make gcc sdcc xxd python-is-python3 libjson-c-dev zlib1g-dev -y
       - name: Run the host-side unit tests
         run: make -C test
-      - name: Check if machine.c can be compiled for all machines
+      - name: Check that every machine definition can be compiled
         run: make machine_check
       - name: Make project (4x2/RTL8372)
         run: make CI=1 MACHINE="KP_9000_6XHML_X2"

CHANGELOG.md

@@ -4,6 +4,17 @@
 
 ## Added
 
+- Devices
+  - Support the hongyavision HYWS-SGT0204S (PCB marking `2G5F4_10G2_V1.01`), an
+    RTL8372 based 4x2.5G + 2xSFP+ unmanaged switch with a 512 KB Bright Moon
+    `T25S40` flash. It is a sibling of the KP-9000-6XH-X2 (2M-PCB43-V1.1) with
+    the two SFP+ cages wired the other way round (physical 5 is on SDS1,
+    physical 6 on SDS0), no reset button fitted, wrong silkscreen labels on the
+    serial header, `LED_GLB_IO_EN` bit 6 has to be set for the port LEDs to
+    work, and the fitted T25S40 cannot be read in DIO mode on this board, so the
+    target selects single-IO flash reads (`flash_sio`). New machine target
+    `MACHINE_2G5F4_10G2_V1_01`, see `doc/devices/2G5F4_10G2_V1.01.md`.
+
 - Web UI
   - Compress the embedded assets (minify + gzip) and switch to a single-page layout. #315
   - Replace the multi-page UI with a themed single-page app: light, dark and Selenized themes following the browser by default,

Makefile

@@ -7,17 +7,20 @@ HTML_LOCATION = 262144
 ifeq ($(origin CC),default)
 CC = sdcc
 endif
-CC_FLAGS = -mmcs51 -I. -Ihttpd -Iuip
+CC_FLAGS = -mmcs51 -I. -Imachine -Ihttpd -Iuip
 ASM ?= sdas8051
 AFLAGS= -plosgff
 
 SUBDIRS := tools
 SUBDIRSCLEAN=$(addsuffix clean,$(SUBDIRS))
 
-ifeq ($(MACHINE),)
+# $MACHINE selects machine/$(MACHINE).c as the board definition and is passed
-	MACHINE:= $(shell grep "^\s*#define MACHINE_" machine.h | sed "s/^\s*#define MACHINE_//")
+# on as -DMACHINE_$(MACHINE), which the rest of the firmware tests with
-else
+# #if defined(MACHINE_...), and as -DMACHINE_NAME, which machine.h uses to
+# include machine/$(MACHINE).h. Both take the same value, so they cannot drift.
+ifneq ($(MACHINE),)
 	CC_FLAGS += -DMACHINE_$(MACHINE)
+	CC_FLAGS += -DMACHINE_NAME=$(MACHINE)
 endif
 # Health instrumentation and the "health" console command: HEALTH=1 gmake ...
 ifneq ($(HEALTH),)
@@ -28,6 +31,9 @@ ifeq ($(CI),1)
 	CC_FLAGS += --Werror
 endif
 
+# The board definition being built: one file per MACHINE_* symbol in machine.h.
+MACHINE_SRC = machine/$(MACHINE).c
+
 BUILDDIR = output/$(MACHINE)
 VERSION_HEADER := version.h
 
@@ -51,16 +57,30 @@ BUILD_DATE := $(shell date -u -d @$(SOURCE_DATE_EPOCH) +"%Y-%m-%d %H:%M:%S" 2>/d
 	|| date -u -r $(SOURCE_DATE_EPOCH) +"%Y-%m-%d %H:%M:%S")
 endif
 
-all: create_build_dir $(VERSION_HEADER) $(SUBDIRS) $(BUILDDIR)/rtlplayground-$(FILENAME_EXTENSION).bin
+# $(MACHINE_SRC) is listed here so an unknown $MACHINE fails before anything else
+# is built, including the tools/ subdirectory.
+all: create_build_dir $(VERSION_HEADER) $(MACHINE_SRC) $(SUBDIRS) $(BUILDDIR)/rtlplayground-$(FILENAME_EXTENSION).bin
 
 create_build_dir:
 	mkdir -p "$(BUILDDIR)"
 	mkdir -p "$(BUILDDIR)/uip"
 	mkdir -p "$(BUILDDIR)/httpd"
+	mkdir -p "$(BUILDDIR)/machine"
 
-# Keep machine.c in first position to fail immediately on invalid $MACHINE value
+# Every machine is a pair machine/<MACHINE>.c + machine/<MACHINE>.h. Selecting
+# them by name means no #if/#elif chain, so an unknown or empty $MACHINE is
+# caught here instead of by a #error further down the build.
+$(MACHINE_SRC):
+	@echo "ERROR: MACHINE='$(MACHINE)' has no definition (expected $(MACHINE_SRC))." >&2
+	@echo "       Every machine is one file pair under machine/, named after the" >&2
+	@echo "       MACHINE_* symbol it defines; see machine/*.c for the full list." >&2
+	@echo "       Example: make MACHINE=KP_9000_6XHML_X2" >&2
+	@false
+
+# Keep the per-machine definition in first position to fail immediately on an
+# invalid $MACHINE value
 SRCS = \
-	machine.c \
+	$(MACHINE_SRC) \
 	machine_init.c \
 	cmd_editor.c \
 	cmd_parser.c \
@@ -79,9 +99,11 @@ SRCS = \
 # RTL837x
 SRCS += \
 	rtl837x_bandwidth.c \
+	rtl837x_cabletest.c \
 	rtl837x_flash.c \
 	rtl837x_igmp.c \
 	rtl837x_init.c \
+	rtl837x_nic.c \
 	rtl837x_leds.c \
 	rtl837x_leds_dump.c \
 	rtl837x_phy.c \
@@ -89,7 +111,9 @@ SRCS += \
 	rtl837x_port.c \
 	rtl837x_stp.c \
 	rtl837x_lldp.c \
-	rtl837x_storm.c
+	rtl837x_storm.c \
+	rtl837x_lacp.c \
+	rtl837x_trap.c
 SRCS += \
 	httpd/httpd.c \
 	httpd/page_impl.c
@@ -178,15 +202,22 @@ $(BUILDDIR)/rtlplayground-$(FILENAME_EXTENSION).bin: $(BUILDDIR)/rtlplayground.i
 
 .PHONY: clean distclean all $(SUBDIRS) $(SUBDIRSCLEAN) create_build_dir
 
+# Every machine/ definition is compiled, so a machine added to machine/ is
+# covered without registering it anywhere. The machine-specific defines are
+# filtered out of $(CC_FLAGS) and supplied per iteration instead, so this also
+# works as "make machine_check MACHINE=...".
+MACHINE_DEFS := $(sort $(patsubst machine/%.c,%,$(wildcard machine/*.c)))
+MACHINE_LESS_CC_FLAGS = $(filter-out -DMACHINE_%,$(CC_FLAGS))
+
 .PHONY:
 machine_check:
 	@mkdir -p $(BUILDDIR)/tmp
 	@set -eo pipefail; \
-	for MACHINE in `grep -E '^[[:space:]]*(//[[:space:]]*)?#define MACHINE_' machine.h | sed -E 's%^[[:space:]]*(//[[:space:]]*)?#define MACHINE_%%' | awk '{print $$1}' | sort -u`; \
+	for MACHINE in $(MACHINE_DEFS); \
 	do \
 	echo "Checking $${MACHINE}"; \
-	$(CC) $(CC_FLAGS) -DMACHINE_$${MACHINE} -MMD -o $(BUILDDIR)/tmp/machine_check -c machine.c; \
+	$(CC) $(MACHINE_LESS_CC_FLAGS) -DMACHINE_$${MACHINE} -DMACHINE_NAME=$${MACHINE} -MMD -o $(BUILDDIR)/tmp/machine_check -c machine/$${MACHINE}.c; \
-	$(CC) $(CC_FLAGS) -DMACHINE_$${MACHINE} -MMD -o $(BUILDDIR)/tmp/machine_check -c machine_init.c; \
+	$(CC) $(MACHINE_LESS_CC_FLAGS) -DMACHINE_$${MACHINE} -DMACHINE_NAME=$${MACHINE} -MMD -o $(BUILDDIR)/tmp/machine_check -c machine_init.c; \
 	done
 	@rm -rf $(BUILDDIR)/tmp
 

README.md

@@ -103,24 +103,29 @@ docker run --rm -p 8080:8080 -v $(pwd):/workspace rtlplayground-dev \
   tools/output/httpd_sim /workspace/html
 ```
 
-Edit `machine.h` or `config.txt` on your host, then re-run `make` — the
+Edit `config.txt` on your host, then re-run `make` — the
 source directory is mounted into the container, so changes take effect
-immediately. To build for a different machine, pass `MACHINE=...`.
+immediately. To build for a different machine, pass `MACHINE=<name>`, which
+selects `machine/<name>.c` (see [Adding a new device](doc/adding-a-device.md)).
 
 </details>
 
 ## (1) Compiling for direct chip flashing AND upgrading an existing RTLPlayground running device
 
-Edit machine.h with an editor like vi or nano. Select the correct machine the firmware should build for.
+Pass the machine that matches your device, for example:
+```
+make MACHINE=DEFAULT_8C_1SFP
+```
+The name selects the board definition `machine/<name>.c`; `make` without a
+`MACHINE` value stops with an error listing what is expected. If your board is
+not in the list yet, see [Adding a new device](doc/adding-a-device.md).
 
 > [!TIP]
 > You can write configuration parameters in config.txt (see below) in order your switch to get
 > straight at the first boot, a correct IP configuration.
 
-Now, building the firmware image should work:
+Now, building the firmware image should work.
-```
+
-make 
-```
 Note, that the image generated ends in .bin, not .img, in order to make IMSProg happy.
 
 image location is stored in `RTLPlayground/output/rtlplayground_version_machine.bin`
@@ -186,7 +191,7 @@ Go to "Firmware update" tab, select the correct file.
 
 > [!IMPORTANT]
 > If your device already runs RTLPlayground, you must upload the binary file /RTLPlayground/output/rtlplayground_Version_Machine.bin
-> If your device is OEM, you must upload the binary file /RTLPlayground/installer/outputrtlplayground_oem_upgrade.bin
+> If your device is OEM, you must upload the binary file /RTLPlayground/installer/output/rtlplayground_oem_upgrade.bin
 
 > [!CAUTION]
 > Check one more time that your device matches the machine type before flashing.
@@ -353,12 +358,14 @@ Enjoy playing!
 ## (11) Other documents
 
 The following documents give further documentation on specific features of the RTL837x SoCs:
+- [Adding a new device](doc/adding-a-device.md)
 - [RTL8372/3 Feature support](doc/hardware.md)
 - [CPU Port](doc/CpuPort.md)
 - [L2 learning](doc/l2.md) 
 - [IGMP (IP-MC streaming)](doc/igmp.md)
 - [SFP+ ports](doc/sfp.md) 
-- [Trunking aka. port aggregation](doc/trunking.md)
+- [Trunking aka. port aggregation](doc/link_aggregation.md)
+- [LACP (802.3ad link aggregation)](doc/lacp.md)
 - [VLAN](doc/vlan.md)
 - [Storm control](doc/storm_control.md)
 - [Modifications and Flash replacement](doc/mods.md)

boot.c

@@ -257,7 +257,7 @@ void nic_setup(void) __banked
 
 	// This sets the size of the RX buffer, the filling level is in 0x7874
 	// R7848-000004ff
-	REG_SET(RTL837X_REG_NIC_RXBUFF_RX, 0x4ff);
+	REG_SET(RTL837X_REG_NIC_RXBUFF_RX, RTL837X_NIC_RX_LAST_SLOT);
 
 	// R7844-000007fe
 	REG_SET(RTL837X_REG_NIC_BUFFSIZE_TX, 0x7fe);
@@ -296,6 +296,7 @@ void nic_setup(void) __banked
 
 	// Sequence number of TX packets
 	tx_seq = 0;
+	REG_SET(RTL837X_NIC_INT_MSK, NIC_INT_RXIE);
 }
 
 

cmd_parser.c

@@ -14,10 +14,13 @@
 #include "rtl837x_regs.h"
 #include "rtl837x_sfr.h"
 #include "rtl837x_stp.h"
+#include "rtl837x_lacp.h"
 #include "rtl837x_igmp.h"
 #include "rtl837x_bandwidth.h"
 #include "rtl837x_lldp.h"
 #include "rtl837x_storm.h"
+#include "rtl837x_trap.h"
+#include "rtl837x_cabletest.h"
 #include "sfp.h"
 #include "dhcp.h"
 #include "syslog.h"
@@ -164,10 +167,15 @@ uint8_t atoi_hex(uint8_t idx)
 			break;
 		}
 
+		if (h_idx == 8) {
+			h_idx = 0;
+			break;
+		}
+
 		// swap hex nibbles
 		val = (val >> 4) | (val << 4);
 
-		if (c - '0' < 10) {
+		if ((uint8_t)(c - '0') < 10) {
 			val |= c - '0';
 		} else {
 			c |= 0x20;
@@ -533,11 +541,21 @@ void parse_lag(void)
 		goto err;
 
 	if (cmd_compare(2, "d")) {
+		lacp_lag_set(group, 0);
 		port_lag_members_set(group, 0);
 		return;
 	}
 
 	uint8_t w = 2;
+	__xdata uint8_t lacp_mode = 0;
+	if (cmd_words_len > 2 && cmd_compare(2, "lacp")) {
+		lacp_mode = 1;
+		w = 3;
+		if (cmd_words_len > 3 && cmd_compare(3, "off")) {
+			lacp_lag_set(group, 0);
+			return;
+		}
+	}
 	while (w < cmd_words_len) {
 		// Parse port.
 		if (cmd_parse_port_separator(cmd_words_b[w++]) == 0)
@@ -545,10 +563,15 @@ void parse_lag(void)
 
 		members |= ((uint16_t)1) << atoi_results_u8;
 	}
-	port_lag_members_set(group, members);
+	if (lacp_mode) {
+		lacp_lag_set(group, members);
+	} else {
+		lacp_lag_set(group, 0);
+		port_lag_members_set(group, members);
+	}
 	return;
 err:
-	cmd_error("lag (show | <1-4> (d | <port>...))\n");
+	cmd_error("lag (show | <1-4> (d | [lacp] <port>...))\n");
 }
 
 
@@ -722,7 +745,7 @@ void parse_isolate(void)
 	if (cmd_compare(2, "off")) {
 		for (uint8_t i = machine.min_port; i <= machine.max_port; i++)
 			members |= ((uint16_t)1) << i;
-		members |= 0x200; // CPU-port
+		members |= PMASK_CPU; // CPU-port
 		port_isolate(port_configured, members);
 		return;
 	}
@@ -846,9 +869,14 @@ void parse_mirror(void)
 	if (cmd_words_len < 2)
 		goto err;
 
+	// The first argument is the mirroring (monitor) port
+	uint8_t ret = cmd_parse_port(cmd_words_b[1]);
+	if (ret == 0)
+		goto err;
+	mirroring_port = atoi_results_u8;
+
 	uint8_t w = 2;
 	uint8_t port;
-	uint8_t ret;
 	while (w < cmd_words_len) {
 		uint8_t idx = cmd_words_b[w++];
 		ret = cmd_parse_port(idx);
@@ -858,10 +886,6 @@ void parse_mirror(void)
 		idx += ret;
 		port = atoi_results_u8;
 
-		// Use the first port argument as mirroring_port
-		if (w == 2)
-			mirroring_port = port;
-
 		ret = cmd_buffer[idx];
 		uint16_t pmask = ((uint16_t)1) << port;
 		if (ret != 't')
@@ -885,6 +909,7 @@ void parse_port(void)
 					 "\nport <port> [show|on|off]" \
 					 "\nport <port> [10m|100m|1g|2g5|duplex] [half|full]" \
 					 "\nport <port> lldp [block|permit]" \
+					 "\nport <port> cabletest [show]" \
 					 "\nport <port> name [custom port name]\n");
 		return;
 	}
@@ -927,6 +952,11 @@ void parse_port(void)
 		}
 	} else if (machine.is_sfp[phy_settings.port]) {
 		print_string(" is SFP no PHY information available.\n");
+	} else if (cmd_compare(2, "cabletest")) {
+		if (cmd_words_len > 3 && cmd_compare(3, "show"))
+			cabletest_show();
+		else
+			cabletest_run();
 	} else if (cmd_compare(2, "10m")) {
 		print_string(" 10M\n");
 		phy_settings.speed = PHY_SPEED_10M;
@@ -1972,6 +2002,13 @@ void cmd_parser(void) __banked
 		} else if (cmd_compare(0, "health")) {
 			health_show();
 #endif
+		} else if (cmd_compare(0, "lacp")) {
+			if (cmd_compare(1, "show"))
+				lacp_show();
+			else if (cmd_compare(1, "off"))
+				lacp_off();
+			else
+				cmd_error("lacp (show | off); a group starts LACP with: lag <1-4> lacp <port>...\n");
 		} else if (cmd_compare(0, "pvid")) {
 			if (cmd_words_len == 3 && cmd_parse_port_separator(cmd_words_b[1]) != 0
 			    && atoi_short(cmd_words_b[2]) && atoi_results_short && atoi_results_short <= 4094)
@@ -2043,9 +2080,11 @@ void cmd_parser(void) __banked
 			if (cmd_compare(1, "on")) {
 				print_string("LLDP enabled\n");
 				lldp_enabled = 1;
+				trap_rma_set(RTL837X_RMA0E_CONF, RTL837X_RMA_ACT_TRAP);
 			} else {
 				print_string("LLDP disabled\n");
 				lldp_enabled = 0;
+				trap_rma_set(RTL837X_RMA0E_CONF, RTL837X_RMA_ACT_FORWARD);
 			}
 		}
 		else {
@@ -2116,7 +2155,7 @@ void execute_config(void) __banked
 				skipping = 1;
 			}
 			c = flash_buf[cfg_idx++];
-			if (c == 0 || c == '\n') {
+			if (c == 0 || c == '\n' || c == '\r') {
 				if (skipping) {
 					skipping = 0;
 				} else {

dhcp.c

@@ -51,7 +51,7 @@ __xdata uip_ipaddr_t server;
 #define DHCP_END		255
 
 #pragma codeseg BANK3
-#pragma constseg BANK2
+#pragma constseg BANK3
 
 struct dhcp_pkt {
 	uint8_t type;

doc/CpuPort.md

@@ -34,6 +34,21 @@ Next, transfer the actual packet over by repeating the SFR function with a
 pointer to the frame on the ASIC directly after the frame header and a
 length as given by the length in the frame header + 7, again divided by 8.
 
+The RX ring's inclusive last slot is configured as `0x4ff`, giving a byte
+range of `0x0000` through `0x27ff`. If the descriptor occupies the last slot
+at `0x27f8`, its payload starts at `0x0000`, not `0x2800`. The RX copy code
+normalizes that starting address before DMA. It relies on the hardware to
+wrap transfers that start inside the ring and cross its end, as observed
+on SWTGW218AS. Programming an initial address of `0x2800` does not wrap
+and can instead read zeros or stale TX data outside the RX ring.
+
+Frame lengths are checked against `UIP_CONF_BUFFER_SIZE` before copying.
+DMA works in whole eight-byte units. `UIP_CONF_BUFFER_ALLOC_SIZE` rounds
+the backing storage up to the next complete word: 1,560 bytes for the
+1,556-byte logical frame limit. This padding allows a maximum-size frame
+to be transferred directly without a separate tail copy. The logical
+frame limit and advertised MSS are unchanged.
+
 The received frame will have an RTL proprietary Ethernet frame type of
 0x8899 (RRPC) where normally the frame type 0x0800 for IPv4 would be located.
 Further 6 bytes follow describing the frame, before the normal IPv4 data

doc/adding-a-device.md

@@ -0,0 +1,196 @@
+# Adding a new device
+
+A device is supported by adding one board definition `.h` and board configuration `.c` file
+under `machine/`. 
+the build selects the definition by name, and CI compiles every file it finds.
+
+To compile for your added device, do:
+```
+make MACHINE=<NAME>
+```
+
+## What a new device consists of
+
+| File | Purpose |
+|------|---------|
+| `machine/<NAME>.c` | the `struct machine machine` board definition |
+| `machine/<NAME>.h` | `MACHINE_MODEL`, the model string shown in the UI and the CLI |
+| `doc/devices/<name>.md` + `doc/supported_devices.md` | (only if the board is verified and you want to support it publicly) user-facing documentation |
+
+`<NAME>` is the machine symbol without its `MACHINE_` prefix, so `MACHINE` is
+passed exactly as spelled on the command line: `make MACHINE=MY_BOARD_1_0`
+needs `machine/MY_BOARD_1_0.c` and `machine/MY_BOARD_1_0.h`.
+
+## Step 1: the model header
+
+`machine/<NAME>.h` only carries the product string. Use the existing files as
+the template:
+
+```c
+#ifndef _MACHINE_MY_BOARD_1_0_H_
+#define _MACHINE_MY_BOARD_1_0_H_
+
+#define MACHINE_MODEL "Brand Model V1.0"
+
+#endif
+```
+
+The device product string is what the CLI or the Web-Interface will print to identify the device; `machine.h` includes it by name.
+
+> [!NOTE]
+> `machine_name` is a `char[30]` and `MACHINE_MODEL` is copied into it at
+> compile time. A longer model string still builds, but SDCC emits
+> `warning 147: excess elements in array of chars initializer` and the name is
+> truncated in the UI. Keep it to 29 characters or less.
+
+## Step 2: the board definition
+
+`machine/<NAME>.c` starts with the shared prelude and then defines the single
+`machine` object. Copy the closest existing board and adjust it — do not start
+from a blank file, the field meanings are easier to see in a real example.
+The best choice is usually a device that has the same number and type of Ethernet
+ports and the same number of SFP+ cages.
+
+```c
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 1,
+	.min_port = 0,
+	.max_port = 8,
+	.n_sfp = 1,
+	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
+	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
+	.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+
+	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+	.sfp_port[0].pin_los = GPIO37,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+	.reset_pin = GPIO_NA,
+
+	.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1 },
+	.led_sets = {
+		{   /* RJ45 ports */
+			LEDS_2G5 | LEDS_LINK,
+			LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+			0,
+			0
+		}, { /* SFP port, single green LED */
+			LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+			0,
+			0,
+			0
+		}
+	},
+};
+```
+
+### Fields
+
+| Field | Meaning |
+|-------|---------|
+| `machine_name` | always `MACHINE_MODEL` |
+| `isRTL8373` | `1` for an RTL8373 SoC, `0` for RTL8372 |
+| `min_port` / `max_port` | range of logical port numbers the device has; `min_port` is `0` for RTL8373 boards and `3` for RTL8372 boards (logical ports 1–2 are the SoC's internal ports on the 8372), `max_port` is usually 8. |
+| `n_sfp` | number of SFP+ cages |
+| `n_10g` | SerDes 10G capability used by the RTL837xN init: `0` none, `1` one, `2` two 10G-capable SerDes |
+| `log_to_phys_port[9]` | logical port (0-based index) → physical front-panel port number |
+| `phys_to_log_port[9]` | the inverse, physical port 1 is index 0, unused slots are 0 |
+| `is_sfp[9]` | `0` for copper, `1` for left slot and `2` for right slot |
+| `sfp_port[2]` | per-cage wiring, `sfp_port[0]` is the leftmost cage |
+| `reset_pin` | GPIO of the reset button, `GPIO_NA` if unpopulated |
+| `high_leds` | mux/enable for the LED pins 27–29 (`LED_27`, `LED_28_SYS`, `LED_29`) |
+| `port_led_set[9]` | which LED set (0–3) each logical port uses |
+| `led_sets[4][4]` | Each port can have up to 4 GPIO output pins assigned. 4 sets of LEDs with 4 LED-conditions per set; the conditions define which GPIO pins become active for a port given a port link-state. Which LEDs are then enabled depends on the wiring of the pins to up to 3 LEDs for that port, which can make a logical combination of the 4 LED output-pins. |
+| `led_mux_custom` / `led_mux[28]` | `1` plus the 28 mux values when the stock LED muxing does not fit the board |
+| `mac_flash_offset` | flash offset of the factory MAC address, omit or `0` if the board does not store one |
+
+Each `struct sfp_port` entry holds `pin_detect`, `pin_los`, `pin_tx_disable`,
+`sds` (which SerDes drives the cage) and `i2c` (built with `I2CBUS(sda, scl)`,
+or `GPIO_NA`-based values where a cage has no such pin).
+
+`I2CBUS(...)` only accepts the pin pairs listed in `machine_defs.h`. A wrong
+pair is caught at compile time: SDCC reports
+`error 176: sizeof applied to an incomplete type` pointing at the offending
+`.i2c` line, because the macro deliberately turns an invalid bus number into an
+array of size 0.
+
+### Reusing an existing definition
+
+If the new board is electrically identical to one that already exists — same
+port mapping, same SFP wiring, same LEDs — do not copy the file. Make the new
+`.c` a symlink and keep only a distinct `.h`, so the two boards cannot drift
+apart:
+
+```
+ln -s KP_9000_6XHML_X2.c machine/MY_BOARD_1_0.c
+```
+
+The new board still needs `machine/MY_BOARD_1_0.h` (pick the version number on the PCB) with its own
+`MACHINE_MODEL`, because `MACHINE_MODEL` is what distinguishes the products.
+Existing examples: `machine/PCB_K0402WS_V3.c`, `machine/KP_9000_9XHML_X_V3_2.c`
+and the six `KP_9000_*` revision variants.
+
+Two files that differ only in whitespace or comments are duplicates and should
+be collapsed this way.
+
+## Step 3: build and verify
+
+```
+make MACHINE=MY_BOARD_1_0
+```
+
+The generated flash image appears as `output/rtlplayground-<version>-MY_BOARD_1_0.bin`. An
+unknown or empty `MACHINE` fails immediately with a message naming the expected
+file, before anything is compiled.
+
+Then run the checks CI runs:
+
+```
+make machine_check    # compiles machine/<NAME>.c and machine_init.c for every machine
+make -C test          # host-side unit tests
+```
+
+`make machine_check` discovers the definitions with
+`$(wildcard machine/*.c)`, so a new file is covered without registering it
+anywhere. CI (`.github/workflows/build.yml`) runs it on every push and pull
+request, alongside full builds for a 4+2 and an 8+1 board.
+
+A successful compile only proves the definition is syntactically valid. The
+actual behaviour — port numbering, SFP detection, LEDs — has to be confirmed on
+hardware, and the console commands (`port`, `stat`, `sfp`, `leds`) are the
+tools for that.
+
+## Step 4: documentation
+
+Once the board has been tested on hardware:
+
+1. Add a row to the table in [Supported devices](supported_devices.md).
+2. Add `doc/devices/<name>.md` describing the board, the build target
+   (`make MACHINE=MY_BOARD_1_0`), what works and what is unverified, plus
+   photos and the PCB silkscreen marking.
+3. If the board shares a PCB with other revisions, follow
+   `doc/devices/KP-9000-6XH-X2.md` and document which `MACHINE` to pick for
+   which silkscreen.
+
+### Identifying the CPU variant
+
+For RTL8373-based devices, use the read-only console command below to distinguish
+the N and non-N CPU variants:
+
+```text
+regget 4
+```
+
+| Register 0x0004 value | CPU |
+|---|---|
+| `0x83730000` | RTL8373 (non-N) |
+| `0x83737000` | RTL8373N |
+
+Record the identified CPU in the device documentation. These values identify
+only the CPU variant; document PHY and flash-chip models separately when verified.
+

doc/devices/2G5F4_10G2_V1.01.md

@@ -0,0 +1,178 @@
+hongyavision HYWS-SGT0204S
+
+RTL8372-based 4×2.5G + 2×SFP+ unmanaged switch.
+
+Also marked on the PCB as `2G5F4_10G2_V1.01`.
+
+Stock firmware runs a factory test console on UART at 9600 baud 8N1 (banner
+`RTL8371B start`, prompt `RTL8371B:`). There is no management CLI and no Web
+interface.
+
+Using SPI clamp in-board is the only method for initial installation and update.
+Erase the whole chip and verify the write (`flashrom -v`) before powering the
+board, so an incomplete write is caught before the board is powered up.
+
+Stock flash chip is 512 KB (Bright Moon `T25S40`, 4 Mbit, SOP-8), which the
+RTLPlayground image fills exactly.
+
+### Label specifications
+
+Case, top / front / nameplate:
+
+<img src="photos/2G5F4_10G2_V1.01/assembled-top.jpg" width="300" />
+<img src="photos/2G5F4_10G2_V1.01/assembled-front.jpg" width="300" />
+<img src="photos/2G5F4_10G2_V1.01/assembled-bottom.jpg" width="300" />
+
+- **Manufacturer**: hongyavision (Shenzhen Hongyavision Electronic Technology
+  Co., Ltd.)
+- **Model**: HYWS-SGT0204S — the nameplate is printed in Chinese and reads
+  "10/100/1000/2500M fibre switch" and "4x 2.5G copper port + 2x 10G SFP+
+  optical port"
+- **Ports**:
+  - 4 × RJ45: 10/100/1000/2500 Mbps
+  - 2 × SFP+: 1G / 2.5G / 10G
+- **Power**: 12 V DC, 2 A
+- **Serial number**: `S/N-YYYYMMDDNNNN`, e.g. `S/N-202312010028`
+
+The top of the case only carries generic printing ("2.5G+10G High Speed Fiber
+Transceiver / 4-Port 2.5G Ethernet Switch+10G Fiber"), so the nameplate on the
+bottom is what identifies the device.
+
+### What works
+
+- All four 2.5GBASE-T RJ45 ports at 10/100/1000/2500 Mbps
+- Both SFP+ ports supporting 1G, 2.5G and 10G modules
+- Copper LEDs: white (2.5G) and blue (link/activity)
+- SFP LEDs: one single LED per port (link/activity)
+- SFP EEPROM and DDM readable on both cages, verified with a 10G module
+  (`Rate: 0x67`, module identity and DDM values via the `sfp` console command)
+- Serial console at 115200 8N1 (RTLPlayground) / 9600 8N1 (stock)
+
+### Not verified
+
+- The reset button footprint is unpopulated and the case has no opening for it,
+  so it could not be tested.
+
+### PCB overview
+
+**Board markings**
+- Top silkscreen: `2G5F4_10G2_V1.01`
+
+**Key components**
+- Main switch: RTL8372 (RTL8371B family), reported as `RTL8372` (non-N) by
+  RTLPlayground. The chip sits under a heatsink and its package marking is not
+  readable.
+- U1: SPI NOR flash, Bright Moon `T25S40`, 4 Mbit / 512 KB, SOP-8
+- A 3-hole reset button footprint is present but unpopulated, and the case has
+  no opening for it, so there is no usable reset button
+
+Top side:
+
+<img src="photos/2G5F4_10G2_V1.01/pcb_top.jpg" width="600" />
+
+Bottom:
+
+<img src="photos/2G5F4_10G2_V1.01/pcb_bottom.jpg" width="600" />
+
+The stock flash chip, Bright Moon `T25S40` (SOP-8, 4 Mbit / 512 KB):
+
+<img src="photos/2G5F4_10G2_V1.01/flash_t25s40.jpg" width="300" />
+
+### Port layout
+
+| Front panel position | Logical port | Physical port | Type    |
+|----------------------|--------------|---------------|---------|
+| SFP left             | 8            | 5             | SFP+    |
+| RJ45 1               | 4            | 1             | Copper  |
+| RJ45 2               | 5            | 2             | Copper  |
+| RJ45 3               | 6            | 3             | Copper  |
+| RJ45 4               | 7            | 4             | Copper  |
+| SFP right            | 3            | 6             | SFP+    |
+
+Copper ports 1–4 match the KP-9000-6XH-X2 (2M-PCB43-V1.1) layout, which this
+board is a sibling of. The two SFP+ cages are wired the other way round
+compared to that board: physical port 5 is on SDS1 and physical port 6 is on
+SDS0.
+
+### Serial console
+
+The board has three through-holes used as the serial console, next to the
+heatsink in the middle of the board and visible in the top side photo above (the
+silkscreen labels are printed rotated by 90°). **The silkscreen labels are
+wrong**: they are shifted relative to the actual signals.
+
+| Silkscreen label | Actual signal |
+|------------------|---------------|
+| TX               | GND           |
+| RX               | TX            |
+| GND              | RX            |
+
+Wiring (following the measured signals, not the labels):
+
+| USB-TTL adapter | Board pad            |
+|-----------------|----------------------|
+| GND             | pad labelled `TX`    |
+| RX              | pad labelled `RX`    |
+| TX              | pad labelled `GND`   |
+
+- **Settings**: 115200 baud / 8N1 / 3.3V TTL (RTLPlayground), 9600 baud for the
+  stock firmware
+- The stock firmware only prints a few bytes and a factory test menu
+  (`?`, `rst`, `f`, `r`, `10`, `100`, `g1`, `sd`, `eye`, …); it is not an
+  interactive management console
+
+### LED configuration
+
+Case silkscreen, below the RJ45 ports:
+
+```
+White : 2.5G    Blue : 1000M/2500M L/A
+```
+
+The front panel also carries a `PWR` LED and one LED per SFP cage (`SFP1`,
+`SFP2`) on the right hand side.
+
+| Port       | LED          | Linked, idle | With traffic |
+|------------|--------------|--------------|--------------|
+| Copper     | white        | 2.5G only    | same         |
+| Copper     | blue         | solid        | blinks (L/A) |
+| SFP        | single LED   | solid        | blinks (L/A) |
+
+Measured LED-ID mapping (from the RTL837x LED set registers):
+
+| LED-ID | Function                        |
+|--------|---------------------------------|
+| LED-ID0| copper blue LED                 |
+| LED-ID1| copper white LED                |
+| LED-ID2| SFP single LED                  |
+
+**Important**: `RTL837X_REG_LED_GLB_IO_EN` bit 6 must be set in
+`machine_custom_init()`. Without it the RTL837x "solid" conditions (LINK/speed)
+do not drive the LEDs at all and only `ACT` does, which makes the white LED
+glow faintly at non-2.5G speeds.
+
+### SFP GPIO assignments
+
+| SFP               | pin\_detect (ModAbs)          | pin\_los         | SerDes | I2C SDA                 | I2C SCL                  |
+|-------------------|-------------------------------|------------------|--------|-------------------------|--------------------------|
+| Left (logical 8, physical 5) | GPIO30\_ACL\_BIT3\_EN | GPIO37   | SDS1   | GPIO39\_I2C\_SDA4       | GPIO40\_I2C\_SCL3\_MDC1  |
+| Right (logical 3, physical 6)| GPIO50\_I2C\_SCL2\_UART1\_TX | GPIO10\_LED10 | SDS0 | GPIO41\_I2C\_SDA3\_MDIO1 | GPIO40\_I2C\_SCL3\_MDC1 |
+
+`pin_tx_disable` is GPIO\_NA on both ports. Both I2C buses are confirmed
+working: with the same 10G module inserted, the `sfp` console command reads its
+vendor and model from the left cage (`Slot 1`) and from the right cage
+(`Slot 2`), DDM values included. The insertion also shows which SerDes drives
+each cage - the left cage reports `sds_config sds: 01` and the right cage
+`sds: 00`, which matches the table above.
+
+### Machine target
+
+Build for this device with `make MACHINE=2G5F4_10G2_V1_01`, which selects the
+`machine/2G5F4_10G2_V1_01.c` board definition. It is derived from
+`machine/KP_9000_6XHML_X2.c` with the SFP cage order and the reset pin changed.
+The fitted T25S40 cannot be read in DIO mode on this board: an image that leaves
+DIO enabled does not come up at all, both at the default read clock divider of 4
+and at 8 (two boards tested), while the same image with single-IO boots and runs
+normally. The board definition therefore sets `flash_sio`, which makes
+`flash_init()` use `CMD_FREAD` at divider 8. Only the management plane is
+slower, the ASIC keeps forwarding in hardware.

doc/devices/2M-PCB23-V3_2.md

@@ -17,8 +17,8 @@ The original web interface reports this board as hardware version V3.2
 The component placement matches [2M-PCB23-V3.1](2M-PCB23-V3_1.md): same
 positions for the flash (U8), the T7/T8/T9/T10 headers, the SFP cage and its
 LED, and the unpopulated U7/U9 footprints. Build with
-`MACHINE=KP_9000_9XHML_X_V3_2`, which uses the V3.1 machine definition and
+`make MACHINE=KP_9000_9XHML_X_V3_2`, whose board file is a symlink to the V3.1
-only differs in the reported name.
+definition and only differs in the reported name.
 
 ## Tested
 

doc/devices/2M-PCB43-V1.1.md

@@ -15,7 +15,7 @@ and sold by Mokerlink.
 The device is fully supported:
 - All 4 2.5GBASE-T RJ45 ports work at 10/100/1000/2500 Mbps
 - The SFP+ port supports 1G, 2.5G and 10G modules 
-- LEDs work with the same indiciations as the OEM firmware (use KP_9000_6XHML_X2_V1_1 in machine.h if building yourself or the corresponding pre-compiled binary)
+- LEDs work with the same indiciations as the OEM firmware (build with `make MACHINE=KP_9000_6XHML_X2_V1_1` if building yourself, or use the corresponding pre-compiled binary)
 - untested due to missing Hardware: SFP+ ports equipped with 1G or 2.5G SFPs.
 
 ### Hardware overview

doc/devices/Hasivo-S1100P-8GT-1SX-S.md

@@ -0,0 +1,41 @@
+# Hasivo S1100P-8GT-1SX-S
+
+RTL8373N switch with 8 × 2.5G RJ45 ports and 1 × SFP port. GD25Q16 2 MiB flash.
+
+## Port mapping
+
+| Front port | ASIC MAC | Interface |
+| --- | --- | --- |
+| 1–8 | 0–7 | RJ45 |
+| 9 | 8 | SFP (SDS1) |
+
+## Board signals
+
+| Function | GPIO |
+| --- | --- |
+| SFP detect | 38 |
+| SFP LOS | 37 |
+| SFP TX disable | Not connected (`GPIO_NA`) |
+| SFP I2C SDA / SCL | 39 / 40 |
+| Reset | 54 |
+
+PoE is managed by an RTL8238B and a separate STC8H8K64U controller, not directly by the RTL8373N. RTLPlayground does not control PoE on this board.
+
+## Build
+
+`make MACHINE=HASIVO_S1100P_8GT_1SX_S CI=1`
+
+## Photos
+
+Front panel:
+
+![Front panel](photos/Hasivo-S1100P-8GT-1SX-S/front.jpg)
+
+PCB top:
+
+![PCB top](photos/Hasivo-S1100P-8GT-1SX-S/pcb_top.jpg)
+
+PCB bottom:
+
+![PCB bottom](photos/Hasivo-S1100P-8GT-1SX-S/pcb_bottom.jpg)
+

doc/devices/ONT-S207CW-62TS-SE.md

@@ -90,6 +90,8 @@ Custom mapping for ONT-S207CW-62TS-SE:
 ## Flashing Instructions
 
 See the [README.md](../../README.md) for general flashing instructions.
+For compilation, use command `make MACHINE=ONT_S207CW_62TS_SE` to specify the machine.
+If you are using managed version of the switch, you can then also compile the installer and flash using GUI - run command `cd installer` and finally `make`.
 
 ## Stock Firmware Information
 

doc/devices/PCB-K0402WS-V1.0.md

@@ -0,0 +1,72 @@
+# PCB-K0402WS-V1.0
+
+This is the first revision of the PCB-K0402WS series of boards; it's very similar to 2.0 in terms of layout/wiring.
+
+The board does have footprints for a VLAN modeswitch at the front and a second flash chip on the bottom of the PCB, but these have been seen to ship unpopulated.
+
+### Brands
+
+* YuanLey YS25-0402 <sup><sub>Note: there are [multiple revisions](PCB-K0402WS-V3.0.md) of the YS25-0402. This first revision lacks the "Vlan" switch cutout on the front of the enclosure.</sub></sup>
+
+### Programming
+
+Use a SOIC-8 clamp to the flash chip (U1 on silkscreen) at the top of the board, leaving it otherwise unpowered.
+
+The board has been seen to ship with a single [BoyaMicro BY25Q16BSSIG](https://www.lcsc.com/datasheet/C382744.pdf) 16Mbit (2MiB) chip, though exact BOM may vary.
+
+<a href="photos/PCB-K0402WS-V1.0/flash.jpg"><img src="photos/PCB-K0402WS-V1.0/flash.jpg" width="300" /></a>
+
+### What works
+
+- All four 2.5GBASE-T RJ45 ports at 10/100/1000/2500 Mbps
+- Both SFP ports supporting 1G, 2.5G and 10G modules
+- LEDs (Power LED is always on)
+
+### PCB overview
+
+#### Board markings
+- Top silkscreen: PCB-K0402W-V1.0 / DIP-K0402WS-V1.0
+
+#### Key components
+- U1: SPI NOR flash, 2 MiB
+- S1: unpopulated slide switch footprint (three through-holes used as serial console)
+
+Front panel
+
+<a href="photos/PCB-K0402WS-V1.0/ports.jpg"><img src="photos/PCB-K0402WS-V1.0/ports.jpg" width="300" /></a>
+
+PCB top
+
+<a href="photos/PCB-K0402WS-V1.0/pcb-top.jpg"><img src="photos/PCB-K0402WS-V1.0/pcb-top.jpg" width="300" /></a>
+
+PCB bottom
+
+<a href="photos/PCB-K0402WS-V1.0/pcb-bottom.jpg"><img src="photos/PCB-K0402WS-V1.0/pcb-bottom.jpg" width="300" /></a>
+
+Bottom and rear
+
+<a href="photos/PCB-K0402WS-V1.0/bottom.jpg"><img src="photos/PCB-K0402WS-V1.0/bottom.jpg" width="300" /></a>
+
+### Power supply
+
+Input power is delivered via a standard DC barrel jack (5.5x2.1mm) with an included 12V 1A adapter.
+
+There is an optional grounding screw next to the DC input.
+
+### Serial console
+
+The PCB has a slide switch footprint (unpopulated) at the front right that is connected to the UART. It is labeled as "S1" on the silkscreen.
+
+Facing the top front (port) side of the board, the pinout from left to right is:
+
+| Position | Signal | GPIO              |
+|----------|--------|-------------------|
+| 1        | RX     | GPIO32\_UART0\_RX |
+| 2        | GND    | N/A               |
+| 3        | TX     | GPIO31\_UART0\_TX |
+
+Standard 0.1" / 2.54mm pin headers will not fit, so wires or clips may be used instead.
+
+The image below shows some oversized clips clumsily attached.
+
+<a href="photos/PCB-K0402WS-V1.0/uart.jpg"><img src="photos/PCB-K0402WS-V1.0/uart.jpg" width="300" /></a>

doc/devices/PCB-K0402WS-V3.0.md

@@ -19,9 +19,14 @@ of the device just above the big label, might be covered by a QC sticker.
 
 <img src="photos/PCB-K0402WS-V3.0/Ztyuav_Z-QWYT0402_label.jpg" width="300" />
 
-* Siscolink SL-G0402F
+* SICSOLINK SL-G0402F
+
+<img src="photos/PCB-K0402WS-V3.0/SICSOLINK SL-G0402F.jpg" width="300"/>
+
+* YuanLey YS25-0402 <sup><sub>Note: there are [multiple revisions](PCB-K0402WS-V1.0.md) of the YS25-0402. This is the newer revision that has a "Vlan" switch on the front.</sub></sup>
+
+<img src="photos/PCB-K0402WS-V3.0/YuanLey_YS25-0402.jpg" width="300"/>
 
-<img src="photos/PCB-K0402WS-V3.0/Siscolink SL-G0402F.jpg" width="300"/>
 ### Programming
 
 Using SPI clamp in-board is the only method for initial installation.
@@ -43,7 +48,7 @@ For the initial flash (at least with flashrom), the bin file produced by the bui
 ### PCB overview
 
 **Board markings**  
-- Top silkscreen: PCB-KO4022W-V3.0 / DIP-KO4022WS-V3.0  
+- Top silkscreen: PCB-K0402W-V3.0 / DIP-K0402WS-V3.0  
 
 Top side
 

doc/devices/SIRIVISION_S25G2206FP_V1_1.md

@@ -0,0 +1,32 @@
+### SIRIVISION_S25G2206FP_V1_1
+
+## Brands
+|Brand|Type|Managed|PCB|Flash|Chip RTL|
+|---|---|---|---|---|---|
+| YuanLey | YS25-0402M | Yes | SIRIVISION_S25G2206FP_V1_1 | 2M | 8372 |
+
+### Label specifications
+
+- **Name**:
+- **Ports**:
+  - 4 × RJ45: 10/100/1000/2500 Mbps
+  - 2 × SFP+: 1000 / 2500 / 10000 Mbps
+- **Power**: 12V DC, 1A  5525 connector
+
+### What works
+The device is fully supported:
+- ALL 2.5GBASE-T RJ45 ports work at 10/100/1000/2500 Mbps
+- ALL SFP+ ports support 1G, 2.5G and 10G modules
+- LEDs work with the same indiciations as the OEM firmware
+### PCB overview
+
+**Board markings**
+- Top silkscreen: SIRIVISION S25G2206FP V1.1
+
+Top side
+
+<img src="photos/SIRIVISION_S25G2206FP_V1_1/dev_pcb_top.jpg" width="300" />
+
+## Power supply
+
+Input power is delivered via barell plug, `12V 1A` adapter was provided.

doc/devices/SWTG018AS_A_V2_0.md

@@ -4,7 +4,8 @@
 |---------|------------------|-------|------------------|-----------------|---------------|
 | Ampcom  | SWTG018AS-A V2.0 | No    | SWTG018AS-A V2.0 | 2MB             | 8273N + 8224N |
 | Horaco  | HC-SWTGW218AS-A  | Yes   | SWTG018AS-A V2.0 | 2MB(25Q16JVSIQ) | 8273N + 8224N |
-| GoodTop | GT-ST018M        | Yes   | SWTG018AS-A V2.0 | ?               | 8273N + 8224N |
+| GoodTop | GT-ST018M        | Yes   | SWTG018AS-A V2.0 | 2MB             | 8273N + 8224N |
+| MokerLink | 2G08110GSN     | No    | SWTG018AS-A V2.0 | 512KB(25Q40)    | 8273N + 8224N |
 
 
 The following is a documentation for the unmanaged switch marked as `SWTG018AS-A V2.0`.
@@ -14,7 +15,7 @@ The original software is running UART on 9600 baud rate.
 
 Using a SOIC clamp in-board is the only method for initial installation.
 
-The board has a single flash chips `BS` with 4M-bit size. The front switch, switches between the two flash chips.
+The board has a single flash chips `BS` with 2M-byte size. The front switch, switches between the two flash chips.
 These can be programed independently by using said switch - so it is e.g. possible to run the original and new firmware in parallel.
 
 ### Label specifications

doc/devices/SWTG024AS-A-V2.0.1_4C_2SFP.md

@@ -2,9 +2,11 @@
 It is highly similar to SWTG024AS-V2.0, with the only difference being the GPIO configuration for the SFP port.
 
 ## Brands
-|Brand|Type|Managed|PCB|Flash|Chip RTL|
+|Brand    |Type          |Managed|PCB                           |Flash           |Chip RTL|
-|---|---|---|---|---|---|
+|---------|--------------|-------|------------------------------|----------------|--------|
-| Horaco | ZX-SG4T2 |  | PCB-SWTG024AS-A-V2.0.1_19650 | P25D40SH | ??? |
+| Horaco  | ZX-SG4T2     | No    | PCB-SWTG024AS-A-V2.0.1_19650 | 512K (P25D40SH)| 8372N  |
+| Horaco  | HC-SWTG124AS | Yes   | PCB-SWTG024AS-A-V2.0.1       | 2M   (W25Q16JV)| 8372N  |
+| GoodTop | GT-ST024M    | Yes   | PCB-SWTG024AS-A-V2.0.1       | 2M             | 8372N  |
 
 ### Label specifications
 

doc/devices/SWTGW215AS.md

@@ -9,7 +9,7 @@
 
 ## RTLPlayground target
 
-Use machine target `MACHINE_LIANGUO_ZX_SWTGW215AS` for this device.
+Build for this device with `make MACHINE=LIANGUO_ZX_SWTGW215AS`, which selects the `machine/LIANGUO_ZX_SWTGW215AS.c` board definition.
 
 Physical hardware verification: 5x RJ45 ports + 1x SFP port. 
 Port 5 RJ45 is interfaced through a RTL8221B IC.

doc/devices/SWTGW218AS.md

@@ -5,9 +5,15 @@
 |---|---|---|---|---|---|
 | Mokerlink | ZX-SWTGW218AS | Yes|  SWTG118AS-V2.0-16029 | 2MB (FM25Q16A)| 8273N + 8224N |
 | Sodola | | | | | |
-| Horaco | | | | | |
+| Horaco | HC-SWTGW218AS | Yes | SWTG118AS-V2.1 | 2MB | 8373 (non-N) |
 | XikeStor | SKS3200-8E1X | Yes | SWTG118AS-V2.1-17462 | 2MB (25Q16JVSIQ) | |
 
+All boards in this table use `MACHINE=SWTGW218AS`. The Horaco HC-SWTGW218AS is also sold with the
+[SWTG018AS-A V2.0](SWTG018AS_A_V2_0.md) board, which needs a different firmware. Check the marking
+on the PCB before flashing.
+
+The PHY and flash-chip models for the tested Horaco units remain unverified.
+
 
 ## Photos
 

doc/igmp.md

@@ -73,7 +73,8 @@ uint8_t igmp_packet_handler(void) __banked;
 void igmp_show(void) __banked;
 ```c
 `igmp_setup()` is called at boot-time and configures flooding of all IP-MC packets by
-default, as otherwise no IP-MC would be possible in the network.
+default, as otherwise no IP-MC would be possible in the network. `igmp off` calls it as
+well; groups learned while IGMP was on stay in the table, but are no longer looked up.
 
 `igmp_enable()`starts IGMP which cause IGMP packets to be handled by the CPU and forwarding
 of IP-MC packets to be limited to only subscribed ports.
@@ -85,6 +86,9 @@ for frames to 01:00:5e:xx:xx:xx and returns 0 when the frame is not a trapped IG
 so that it is passed on to the IP stack. IGMPv1/v2 reports (0x12, 0x16) join the group given
 in the IGMP header, IGMPv2 leaves (0x17) leave it, IGMPv3 reports use the first group record
 (type 4 joins, type 3 leaves). Trapped IGMP frames arrive without a VLAN tag.
+Reports for groups in 224.0.0.0/24 are ignored: the switch floods that block
+even with IGMP on, and an entry for a group such as 224.0.0.251 (mDNS) would
+otherwise limit it to the ports that reported it, as RFC 4541 warns against.
 
 `igmp_show()` prints out the IGMP configuration on the CLI.
 

doc/l2.md

@@ -73,13 +73,14 @@ without being flooded to the other ports. No bridge relays these frames:
 their addresses are in the set that 802.1D-2004 clause 7.12.6 forbids a
 bridge to forward, and what travels the network is the information, with
 every bridge regenerating BPDUs of its own on its designated ports. The reserved-multicast *trap* action
-cannot do that on this hardware, because its destination is an external CPU
+does that: it delivers to the port named in `EXT_CPU_CTRL` (0x6724), which
-attached to a physical port, which these boards do not populate. The protocol
+`trap_init()` sets to 9, the CPU port, at startup; with the reset value 0xf it
-modules therefore leave the reserved-multicast action at *forward* and constrain
+names no port and the trapped frame is dropped. STP traps its address while it
-the egress with a static L2 multicast entry instead: the lookup hits the entry's
+runs (see stp.md). Where the action is left at *forward*, the egress can be
-own port mask rather than the VLAN flood mask. Verified on a SWTGW218AS both
+constrained with a static L2 multicast entry instead: the lookup hits the
-ways, with the CPU bit cleared, where delivery stops, and with the CPU bit alone,
+entry's own port mask rather than the VLAN flood mask. Verified on a SWTGW218AS
-where nothing egresses.
+both ways, with the CPU bit cleared, where delivery stops, and with the CPU bit
+alone, where nothing egresses.
 
 `port_l2mc_set()` writes one such entry. The SMI layout is the L2 multicast
 variant of the table entry:

doc/lacp.md

@@ -0,0 +1,155 @@
+# LACP (Link Aggregation Control Protocol, IEEE 802.3ad)
+
+A static link aggregation group works only if both ends are configured for the
+same links, and nothing checks that they are. LACP lets the two ends agree on
+which links reach the same partner, aggregates only those, and takes a link out
+of the group when the partner stops answering.
+
+The switch runs LACP in software on the 8051. LACP frames belong to the Slow
+Protocols, with destination `01:80:C2:00:00:02` and ethertype `0x8809`; the
+subtype of LACP frames is 1. The implementation has the Receive, Selection and
+Mux machines of 802.3ad clause 43 and does not aggregate links whose partners
+differ. Up to `LACP_NUM_LAGS` (4) groups can run LACP; the others stay static.
+
+## Getting the frames to the CPU
+
+While LACP runs, the reserved multicast action for `01:80:C2:00:00:02` is
+*trap*, the same mechanism STP uses for its BPDUs, see [stp.md](stp.md). A
+trapped LACPDU has no VLAN tag after the RTL tag, and `TRAP_RX_BODY()` gives the
+offset of the LACPDU in the received frame. When the last group leaves LACP,
+the action goes back to *drop*.
+
+## What has to match across the members
+
+802.3ad requires that every link in an aggregate be full duplex and run at the
+same speed. Beyond the standard, anything that changes how a frame is treated
+has to be identical across members, because the hash picks the member per frame
+and a difference would make the behaviour depend on that choice:
+
+* must match: speed and duplex, VLAN membership and pvid, ingress filtering,
+  port isolation
+* may differ: EEE, LED configuration, counters, cable diagnostics
+
+None of this is enforced yet — `port_lag_members_set()` writes a member mask and
+a hash setting and validates nothing. See #377 for the discussion of whether a
+mismatch should be rejected or applied to the whole group.
+
+## Protocol timing
+
+The timer values are in units of the LACP timer, which steps every four ticks
+of the system clock, 50 times per second:
+
+| Constant             | Value | Time |
+|----------------------|-------|------|
+| `LACP_FAST_PERIODIC` | 50    | 1 s  |
+| `LACP_SLOW_PERIODIC` | 1500  | 30 s |
+| `LACP_SHORT_TIMEOUT` | 200   | 4 s  |
+
+802.3ad specifies a fast periodic time of 1 s with a short timeout of 3 s, and a
+slow periodic time of 30 s with a long timeout of 90 s. The switch transmits at
+the rate the partner asks for with its TIMEOUT bit. Its own timeout is always
+the short one, one second above the standard, so a partner that stops sending
+while its link stays up leaves the trunk after 4 s.
+
+The Partner block of a transmitted LACPDU repeats the partner's actor
+information as it was last received: system priority, system, key, port
+priority, port and state. A Linux partner sets our SYNC only when this block
+matches what it sent.
+
+## LACP API
+
+```
+void lacp_init(void) __banked;
+void lacp_off(void) __banked;
+void lacp_lag_set(uint8_t lag, __xdata uint16_t ports) __banked;
+void lacp_in(void) __banked;
+void lacp_timers(void) __banked;
+void lacp_show(void) __banked;
+```
+
+`lacp_init()` has to run before the startup configuration replays, because xdata
+is not zeroed and the port-to-LAG map uses `0xff` as "no LAG"; a stray zero would
+make a port look like it belongs to LAG 0.
+
+## LACP configuration on the serial console
+
+A group is put under LACP by adding `lacp` to the `lag` command:
+
+```
+lag 1 lacp 7 8      # ports 7 and 8 become LACP candidates of group 1
+lag 1 lacp off      # group 1 leaves LACP, its trunk is cleared (so does "lag 1 lacp")
+lag 1 d             # group 1 disabled, whether it ran LACP or not
+lag 1 7 8           # plain static aggregation, no protocol
+```
+
+A group put under LACP gives up the static trunk it had: the hardware trunk is
+cleared and rebuilt from the ports that converge. The other way round, `lag 1 d`
+and a static member list take the group out of LACP before they touch the
+trunk. A port named in another LACP group moves to the new one. The protocol
+starts with the first group put under LACP and stops when the last one is taken
+out; there is no separate switch for it. Two commands act on the whole engine:
+
+```
+lacp off            # every group leaves LACP, protocol stopped
+lacp show
+```
+
+`lacp show` prints the engine state, then one line per group with its candidate
+ports, the elected aggregator and the trunk members actually programmed into the
+hardware, then one line per port with the actor and partner state bytes and the
+receive-machine state.
+
+## LACP configuration via the Web Interface
+
+Each group on the LAG page has a Static/LACP mode next to its member ports;
+for an LACP group it shows the elected aggregator and the active members. Below
+the groups a table has one row per LACP port with its group, actor and partner
+state, receive state, LACPDU count and partner system. The page reads
+`/lacp.json` every three seconds while it is open. The member checkboxes of a
+static group come from the hardware registers in `/lag.json`.
+
+## A test with a Linux 802.3ad bond
+
+Two ports of the switch to two interfaces of one host:
+
+```
+ip link add bond0 type bond mode 802.3ad
+ip link set enp1s0 down && ip link set enp1s0 master bond0
+ip link set enp2s0 down && ip link set enp2s0 master bond0
+ip link set bond0 up
+```
+
+On the switch, with those two ports as the group:
+
+```
+lag 1 lacp 7 8
+```
+
+`lacp show` should then give both ports an actor state of `0x3f` (ACTIVITY,
+TIMEOUT, AGGREGATION, SYNC, COLLECTING and DISTRIBUTING), a partner state with
+SYNC set, and the partner's system MAC. `lag show` lists the trunk members as
+programmed in the hardware and should show both ports.
+
+On the host, `/proc/net/bonding/bond0` should show the same `Aggregator ID` for
+both slaves; different IDs mean that each link is in a group of its own. Both
+churn states should read `none`.
+
+Further checks:
+
+* `tcpdump -i enp1s0 ether proto 0x8809` on each slave shows the LACPDUs of the
+  switch and of that slave, never those of the other slave.
+* The host log has no `illegal loopback`.
+* The three reserved bytes after the actor state in a LACPDU from the switch
+  are zero.
+
+When one slave goes down, the group narrows to the remaining member, and the
+slave rejoins after it comes back.
+
+## Known limits
+
+* No Churn Detection machines and no Marker protocol.
+* Coupled Mux: collecting and distributing are enabled together.
+* One aggregator per group.
+* Selection compares the partner's system only, not its key: two aggregates
+  that one partner system offers on the same group land in one trunk here.
+* Member compatibility is not validated; see #377.

doc/link_aggregation.md

@@ -227,3 +227,7 @@ iperf Done.
 ```
 As you can see, the total throughput was 4.71 GBit/sec which is close to the
 maximum possible with a single 5GBit link.
+
+## LACP
+
+Dynamic aggregation with LACP is described in [lacp.md](lacp.md).

doc/stp.md

@@ -35,28 +35,34 @@ BPDUs are addressed to `01:80:C2:00:00:00`, a reserved link-local group. The
 ASIC's Reserved-Multicast action for that address decides what happens to the
 frame.
 
-Forwarding to the CPU port works normally: the 8051 sits behind an ordinary
+While STP runs, the action is *trap*. A trap delivers to the port named in
-port of the internal switch and is an ordinary member of a forwarding mask.
+`EXT_CPU_CTRL` (0x6724), whose reset value 0xf names no port, and with that
-The *trap* action does not deliver to it. Its destination is an external CPU
+value the trapped frame is dropped at ingress. `trap_init()` sets it to 9, the
-attached to a physical port (`cpuTag_externalCpuPort_set`, `EXT_CPU_CTRL` in
+port the 8051 sits behind, once at startup. The trap needs no per-VLAN L2
-the vendor SDK), which these boards do not populate. The ACL trap and
+entries, so it does not depend on which VLANs exist or on the PVIDs, and turning
-redirect actions do not deliver to the 8051 either.
+STP on no longer walks the whole VLAN table. BPDUs reach the CPU on a port that
+STP holds in blocking with either action: measured on a SWTGW218AS by sending
+BPDUs into a blocked port with forward and with trap, both ports stopped being
+edge and waited out the forward delay. The chip exempts this address from the
+ingress state check; the slow-protocols address used by LACP is not exempt.
 
-Delivery therefore uses the *forward* action, constrained to the CPU port
+A trapped frame reaches the CPU in the format it came in with: unlike a
-by a static L2 multicast entry (`port_l2mc_set()`), one per VLAN in use:
+forwarded one it has no VLAN tag inserted after the RTL tag, and the RTL tag
+carries the trap reason. `stp_in()` reads the BPDU from the offset
+`TRAP_RX_BODY()` returns, which works for both.
 
-* while STP runs, the entry's member mask is the CPU port only — BPDUs reach
+With STP off, the action goes back to *forward* and a static L2 multicast
-  the CPU and are not flooded to other ports, as a participating bridge
+entry per VLAN in use (`port_l2mc_set()`) targets all ports, restoring the
-  requires;
+transparency an unmanaged switch is expected to have, so a surrounding
-* with STP off, the same entries are retargeted to all ports, restoring the
+spanning tree can span *through* this device.
-  transparency an unmanaged switch is expected to have, so a surrounding
-  spanning tree can span *through* this device.
 
-A BPDU delivered this way is an ordinary frame to the port's ingress logic
+The port's acceptable-frame-type filter treats the two actions differently.
-and passes through its acceptable-frame-type filter. BPDUs are untagged, so a
+BPDUs are untagged, so a port set to admit tagged frames only
-port set to admit tagged frames only (`ingress <port>t`) never delivers one
+(`ingress <port>t`) drops a forwarded BPDU before it reaches the CPU, while a
-to the CPU. `stp_setup()` prints a warning for every STP-enabled port in that
+trapped one passes. Both were measured on a SWTGW218AS with `ingress 3t`:
-state.
+LACPDUs, delivered by forward, stopped arriving on port 3, and BPDUs sent into
+the same port, delivered by trap, kept arriving. A port that admits tagged
+frames only therefore takes part in STP.
 
 ## Link aggregation
 

doc/supported_devices.md

@@ -4,44 +4,52 @@ The following devices have been tested and are fully working:
 | Brand    | Type            | Managed | PCB                                                                       | Flash | Ports |
 |----------|-----------------|---------|---------------------------------------------------------------------------|-------|-------|
 | Ampcom   | WAM902-SWTG018AS| No      | [SWTG018AS-A V2.0](devices/SWTG018AS_A_V2_0.md)                           |       | 8 + 1 |
+| Binardat | 2G06-04210GSM   | No      | [PCB-SWTG024AS-A-2.0.1](devices/ONT-S207CW-62TS-SE.md)                    | 0.5M  | 4 + 2 |
 | Davuaz   | Da-K6501W       | No      | [PCB-K0501W-V2.0](devices/K0501W_V2_0.md)                                 |       | 5 + 1 |
 | FOXNEO   | FNS-1200P       | No      | [PCB-K0402W-U13-V2.0](devices/FNS-1200P.md)                               | 2M    | 4 + 2 |
 | Goalake  | IG108           | No      | [PB-2132](devices/PB-2132.md)                                             | 4M    | 8 + 1 |
-| GoodTop  | GT-ST018M       | Yes     | [SWTG018AS-A V2.0](devices/SWTG018AS_A_V2_0.md)                           | ?     | 8 + 1 |
+| GoodTop  | GT-ST018M       | Yes     | [SWTG018AS-A V2.0](devices/SWTG018AS_A_V2_0.md)                           | 2M    | 8 + 1 |
+| GoodTop  | GT-ST024M       | Yes     | [SWTG024AS-A V2.0.1](devices/SWTG024AS-A-V2.0.1_4C_2SFP.md)               | 2M    | 4 + 2 |
+| Guangnianwei | 7018-2.5G   | No      | [F7008-2.5GPOE-V1.2](devices/F7008-2.5.md)                                | 8M    | 8 + 1 |
 | Hasivo   | S1100WP_8GT_1SX_SE | Yes  | [S1100WP_8GT_1SX_SE-V1.05](devices/HASIVO_S1100WP_8GT_1SX_SE.md)          | 2M    | 8 + 1 |
-| Hisource | Hi-K0402WS      | No      | [PCB-K0402WS-V3.0](devices/PCB-K0402WS-V3.0.md)                           |       | 4 + 2 |
 | Hisource | Hi-K0402WS      | No      | [PCB-K0402WS-V2.0](devices/PCB-K0402WS-V2.0.md)                           | 2M    | 4 + 2 |
+| Hisource | Hi-K0402WS      | No      | [PCB-K0402WS-V3.0](devices/PCB-K0402WS-V3.0.md)                           |       | 4 + 2 |
 | Hisource | Hi-K0801WS      | No      | [PCB-KO801W-V2.0](devices/HI-K0801WS.md)                                  |       | 8 + 1 |
+| hongyavision | HYWS-SGT0204S | No    | [2G5F4_10G2_V1.01](devices/2G5F4_10G2_V1.01.md)                           | 0.5M  | 4 + 2 |
 | hongyavision | LG-SG5T1    | No      | [PCB-SWTG024AS-V2.0_16895](devices/SWTG024AS-V2.0.md)                     | 0.5M  | 5 + 1 |
+| Horaco   | HC-SWTG124AS    | Yes     | [SWTG024AS-A-V2.0.1](devices/SWTG024AS-A-V2.0.1_4C_2SFP.md)               | 2M    | 4 + 2 |
 | Horaco   | HC-SWTGW215AS   | Yes     | [SWTG024AS-A-V2.0.1_19650 5C 1SFP](devices/SWTG024AS-A-V2.0.1_5C_1SFP.md) | ?     | 5 + 1 |
 | Horaco   | HC-SWTGW218AS   | Yes     | [SWTG018AS-A V2.0](devices/SWTG018AS_A_V2_0.md)                           |       | 8 + 1 |
+| Horaco   | HC-SWTGW218AS   | Yes     | [SWTG118AS-V2.1](devices/SWTGW218AS.md)                                   | 2M    | 8 + 1 |
 | Horaco   | ZX310S-4T2XH    | Yes     | [PCB-SL310S-4T1T1X-V1.0.1-24107](devices/ZX310S-4T2XH.md)                 | 2M    | 5 + 1 |
 | Horaco   | ZX310S-4T2XT    | Yes     | [PCB-SL310S-4T2XT-V1.0.0-22273](devices/ZX310S-4T2XT.md)                  | 2M    | 6     |
 | Horaco   | ZX-SG4T2        | No      | [SWTG024AS-A-V2.0.1_19650_4C_2SFP](devices/SWTG024AS-A-V2.0.1_4C_2SFP.md) | 0.5M  | 4 + 2 |
 | Horaco   | ZX-SWTG124AS    | Yes     | [SWTG024AS-v2.0](devices/SWTG024AS.md)                                    |       | 4 + 2 |
-| Keeplink | KP-9000-6XH-X2 / KP-9000-6XHML-X2 | No/Yes | [2M-PCB43-V1.2 / V2.1](devices/KP-9000-6XH-X2.md) |       | 4 + 2 |
+| keepLINK | KP-9000-6XH-X2 / KP-9000-6XHML-X2 | No/Yes | [2M-PCB43-V1.2 / V2.1](devices/KP-9000-6XH-X2.md)        |       | 4 + 2 |
 | keepLINK | KP-9000-9XHML-X | Yes     | [2M-PCB23-V2.2](devices/2M-PCB23-V2_2.md)                                 | 2M    | 8 + 1 |
 | keepLINK | KP-9000-9XHML-X | Yes     | [2M-PCB23-V3.1](devices/2M-PCB23-V3_1.md)                                 | 2M    | 8 + 1 |
 | keepLINK | KP-9000-9XHML-X | Yes     | [2M-PCB23-V3.2](devices/2M-PCB23-V3_2.md)                                 | 2M    | 8 + 1 |
+| LIANGUO  | HYWS-SGT0108S   | No      | [2G5F_20G_V1.01](devices/HYWS-SGT0108S.md)                                | 0.5M  | 8 + 1 |
 | LIANGUO  | SWTG024AS       | No      | [SWTG024AS-v2.0-17452](devices/SWTG024AS.md)                              | 0.5M  | 4 + 2 |
-| Lianguo  | ZX-SWTGW215AS   | Yes     | [PCB-SWTG115AS-V2.0 / PCB-SWTG115AS-V2.1](devices/SWTGW215AS.md)          | 2M    | 5 + 1 |
+| LIANGUO  | ZX-SWTGW215AS   | Yes     | [PCB-SWTG115AS-V2.0 / PCB-SWTG115AS-V2.1](devices/SWTGW215AS.md)          | 2M    | 5 + 1 |
-| Lianguo  | HYWS-SGT0108S   | No      | [2G5F_20G_V1.01](devices/HYWS-SGT0108S.md)                                | 0.5M  | 8 + 1 |
+| MokerLink| 2G040210GSM     | Yes     | [2M-PCB43-V1.1](devices/2M-PCB43-V1.1.md)                                 |       | 4 + 2 |
-| Mokerlink| 2G040210GSM     | Yes     | [2M-PCB43-V1.1](devices/2M-PCB43-V1.1.md)                                 |       | 4 + 2 |
-| Mokerlink| ZX-SWTGW218AS   | Yes     | [SWTG118AS-V2.0-16029](devices/SWTGW218AS.md)                             | 2M    | 8 + 1 |
 | MokerLink| POE-2G080110GS  | No      | [2M-PCB51-ML-V1.1](devices/2M-PCB51-ML-V1_1.md)                           | 4M    | 8 + 1 |
-| Binardat | 2G06-04210GSM    | No      | [PCB-SWTG024AS-A-2.0.1](devices/ONT-S207CW-62TS-SE.md)                 | 0.5M  | 4 + 2 |
+| MokerLink| ZX-SWTGW218AS   | Yes     | [SWTG118AS-V2.0-16029](devices/SWTGW218AS.md)                             | 2M    | 8 + 1 |
-| ONT      | ONT-S207CW-62TS-SE | No   | [PCB-SWTG024AS-A-2.0.1](devices/ONT-S207CW-62TS-SE.md)                 | 0.5M  | 4 + 2 |
+| MokerLink| 2G08110GSN      | No      | [SWTG018AS-A V2.0](devices/SWTG018AS_A_V2_0.md)                           | 0.5M  | 8 + 1 |
 | Netcore  | GS9             | No      | [PB-2132](devices/PB-2132.md)                                             | 4M    | 8 + 1 |
+| ONT      | ONT-S207CW-62TS-SE | No   | [PCB-SWTG024AS-A-2.0.1](devices/ONT-S207CW-62TS-SE.md)                    | 0.5M  | 4 + 2 |
 | Ruiying  | RY-4GT-2SX      | No      | [FG-4GT-2SX_V2.0](devices/FG-4GT-2SX_V2.0.md)                             | 4M    | 4 + 2 |
 | Ruiying  | RY-8GT-1SX      | No      | [FG-8GT-1SX](devices/FG-8GT-1SX.md)                                       | 1M    | 8 + 1 |
-| SiscoLink | SL-G0402F      | No      | [PCB-K0402WS-V3.0](devices/PCB-K0402WS-V3.0.md)                           |       | 4 + 2 |
+| SICSOLINK| SL-G0402F       | No      | [PCB-K0402WS-V3.0](devices/PCB-K0402WS-V3.0.md)                           |       | 4 + 2 |
 | Sodola   | SL-SWTG124AS-D  | Yes     | [SWTG024AS-v2.0-17452](devices/SWTG024AS.md)                              | 2M    | 4 + 2 |
 | Steamemo | IG204-V1        | No      | [PB-2131](devices/STEAMEMO_IG204_V1.md)                                   |       | 4 + 2 |
-| TrendNet | TEG-S562        | No      | [TEG-S563/EU H/W: V1.0R](devices/TEG-S562.md)                             | 2M    | 4 + 2 |
+| TRENDnet | TEG-S562        | No      | [TEG-S563/EU H/W: V1.0R](devices/TEG-S562.md)                             | 2M    | 4 + 2 |
-| Xikestore| SKS3200M-4GPY2XF| Yes     | [SWTG024AS-v1.0](devices/SWTG024AS.md)                                    |       | 4 + 2 |
+| XikeStor | SKS3200M-4GPY2XF| Yes     | [SWTG024AS-v1.0](devices/SWTG024AS.md)                                    |       | 4 + 2 |
 | XikeStor | SKS3200-8E1X    | Yes     | [SWTG118AS-V2.1-17462](devices/SWTGW218AS.md)                             | 2M    | 8 + 1 |
+| YuanLey  | YS25-0402       | No      | [PCB-K0402WS-V1.0](devices/PCB-K0402WS-V1.0.md)                           | 2M    | 4 + 2 |
+| YuanLey  | YS25-0402       | No      | [PCB-K0402WS-V3.0](devices/PCB-K0402WS-V3.0.md)                           | 2M    | 4 + 2 |
+| YuanLey | YS25-0402M       | Yes     | [SIRIVISION_S25G2206FP_V1_1](devices/SIRIVISION_S25G2206FP_V1_1.md)       | 2M    | 4 + 2 |
 | Ztyuav   | Z-QWYT0402      | No      | [PCB-K0402WS-V3.0](devices/PCB-K0402WS-V3.0.md)                           |       | 4 + 2 |
-| Guangnianwei | 7018-2.5G   | No      | [F7008-2.5GPOE-V1.2](devices/F7008-2.5.md)                                | 8M    | 8 + 1 |
 
 For KP-9000-6XH-X2 / KP-9000-6XHML-X2 / Mokerlink 2G040210GSM devices, select
 the machine target by PCB revision. The ML/non-ML or managed/unmanaged label

html/app.js

@@ -11,15 +11,15 @@ th_sel_light:"Selenized Light",th_sel_dark:"Selenized Dark",
 c_port:"Port",c_name:"Name",c_link:"Link",c_apply:"Apply",c_cancel:"Cancel",c_confirm:"Confirm",
 c_close:"Close",c_refresh:"Refresh",c_off:"off",c_offc:"Off",c_down:"down",c_on:"On",c_auto:"Auto",c_delete:"Delete",
 c_type:"Type",c_state:"State",c_enabled:"Enabled",c_load:"Load",c_disable:"Disable",c_sfp:"SFP",
-c_full:"full",c_half:"half",c_devices:"devices",c_yes:"yes",c_no:"no",
+c_full:"full",c_half:"half",c_yes:"yes",c_no:"no",
-d_ports:"Ports",d_ports_h:"click a port for details",d_system:"System",d_traffic:"Traffic",
+d_system:"System",d_traffic:"Traffic",
 d_traffic_h:"packets/s, live",d_txpps:"TX pps",d_rxpps:"RX pps",d_txbad:"TX bad",d_rxbad:"RX bad",
 i_host:"Hostname",i_ip:"IP address",i_mask:"Netmask",i_gw:"Gateway",i_mac:"MAC",i_fw:"Firmware",
 i_built:"Built",i_hw:"Hardware",i_temp:"Temperature",i_flash:"Flash",i_syslog:"Syslog",
 p_state:"State",p_disabled:"disabled",p_up:"up",p_txgb:"TX good / bad",p_rxgb:"RX good / bad",
 p_pkts:"pkts",p_module:"Module",p_temp:"Temperature",p_vcc:"Vcc",p_txbias:"TX bias",p_txpower:"TX power",
 p_rxpower:"RX power",p_txfault:"TX fault",p_txdis:"TX disabled",p_rxlos:"RX LOS",p_adv:"Advertising",
-pt_title:"Port configuration",pt_conn:"Connected",pt_speed:"Speed",pt_mtu:"MTU",
+pt_title:"Port configuration",pt_conn:"Devices learned",pt_speed:"Speed",pt_mtu:"MTU",
 pt_sfp_note:"SFP speed is set per slot and is not saved in the startup config.",
 pt_name_err:"Port name: 1-15 characters, no spaces",pt_mtu_err:"MTU must be 64-16383",
 stp_title:"Spanning tree",stp_h:"RSTP, 802.1w",stp_version:"Version",stp_v_stp:"STP compatible",
@@ -67,6 +67,9 @@ iso_title:"Port isolation",iso_from:"From port",iso_to:"To port",iso_all:"Allow
 iso_intro:"A frame entering a port may only leave through the ports ticked in its row. Isolation is decided before forwarding, so a port that is not ticked is unreachable directly, whatever the address table says.",
 iso_legend:"The cell of the port itself is always allowed. A port number in red marks a port that is not fully open.",
 lag_hash:"Hash:",lag_note:"A LAG needs at least one member to be saved in the startup config; applying an empty group clears it.",
+lacp_heading:"LACP (802.3ad)",lag_mode:"Mode",lag_static:"Static",lacp_neg:"negotiating",lacp_agg:"aggregator",
+lacp_members:"active members",lacp_hint:"LACP: select candidate ports and press Apply to start negotiation",
+lacp_actor:"Actor",lacp_partner:"Partner",lacp_rxstate:"RX state",lacp_rx:"LACPDUs received",lacp_psys:"Partner system",
 lag_clear_q:"Clear LAG {n}?",lag_clear_d:"All member ports return to normal operation.",
 e_title:"Energy Efficient Ethernet",e_adv:"Advertised",e_lp:"Link partner",e_active:"Active",e_enable:"Enable",
 e_note:"Advertised and link-partner flags per speed: 100M, 1G, 2.5G. SFP ports do not support EEE.",
@@ -139,15 +142,15 @@ th_sel_light:"Selenized ライト",th_sel_dark:"Selenized ダーク",
 c_port:"ポート",c_name:"名前",c_link:"リンク",c_apply:"適用",c_cancel:"キャンセル",c_confirm:"確認",
 c_close:"閉じる",c_refresh:"更新",c_off:"オフ",c_offc:"オフ",c_down:"リンクダウン",c_on:"オン",c_auto:"自動",c_delete:"削除",
 c_type:"タイプ",c_state:"状態",c_enabled:"有効",c_load:"読み込み",c_disable:"無効化",c_sfp:"SFP",
-c_full:"全二重",c_half:"半二重",c_devices:"デバイス",c_yes:"はい",c_no:"いいえ",
+c_full:"全二重",c_half:"半二重",c_yes:"はい",c_no:"いいえ",
-d_ports:"ポート",d_ports_h:"ポートをクリックすると詳細を表示",d_system:"システム",d_traffic:"トラフィック",
+d_system:"システム",d_traffic:"トラフィック",
 d_traffic_h:"パケット/秒、リアルタイム",d_txpps:"TX pps",d_rxpps:"RX pps",d_txbad:"TX 異常",d_rxbad:"RX 異常",
 i_host:"ホスト名",i_ip:"IP アドレス",i_mask:"ネットマスク",i_gw:"ゲートウェイ",i_mac:"MAC",i_fw:"ファームウェア",
 i_built:"ビルド日",i_hw:"ハードウェア",i_temp:"温度",i_flash:"フラッシュ",i_syslog:"Syslog",
 p_state:"状態",p_disabled:"無効",p_up:"アップ",p_txgb:"TX 正常 / 異常",p_rxgb:"RX 正常 / 異常",
 p_pkts:"pkts",p_module:"モジュール",p_temp:"温度",p_vcc:"電圧",p_txbias:"TX バイアス",p_txpower:"TX 電力",
 p_rxpower:"RX 電力",p_txfault:"TX 障害",p_txdis:"TX 無効",p_rxlos:"RX 信号ロス",p_adv:"アドバタイズ",
-pt_title:"ポート設定",pt_conn:"接続デバイス",pt_speed:"速度",pt_mtu:"MTU",
+pt_title:"ポート設定",pt_conn:"学習済みデバイス",pt_speed:"速度",pt_mtu:"MTU",
 pt_sfp_note:"SFP の速度はスロット単位で設定され、起動設定には保存されません。",
 pt_name_err:"ポート名: 1〜15 文字、空白不可",pt_mtu_err:"MTU は 64〜16383 の範囲で指定してください",
 stp_title:"スパニングツリー",stp_h:"RSTP, 802.1w",stp_version:"バージョン",stp_v_stp:"STP 互換",
@@ -252,15 +255,15 @@ th_sel_light:"Selenized 浅色",th_sel_dark:"Selenized 深色",
 c_port:"端口",c_name:"名称",c_link:"链路",c_apply:"应用",c_cancel:"取消",c_confirm:"确认",
 c_close:"关闭",c_refresh:"刷新",c_off:"关",c_offc:"关",c_down:"未连接",c_on:"开",c_auto:"自动",c_delete:"删除",
 c_type:"类型",c_state:"状态",c_enabled:"启用",c_load:"读取",c_disable:"禁用",c_sfp:"SFP",
-c_full:"全双工",c_half:"半双工",c_devices:"台设备",c_yes:"是",c_no:"否",
+c_full:"全双工",c_half:"半双工",c_yes:"是",c_no:"否",
-d_ports:"端口",d_ports_h:"点击端口查看详情",d_system:"系统",d_traffic:"流量",
+d_system:"系统",d_traffic:"流量",
 d_traffic_h:"包/秒，实时",d_txpps:"TX pps",d_rxpps:"RX pps",d_txbad:"TX 错误",d_rxbad:"RX 错误",
 i_host:"主机名",i_ip:"IP 地址",i_mask:"子网掩码",i_gw:"网关",i_mac:"MAC",i_fw:"固件",
 i_built:"构建日期",i_hw:"硬件",i_temp:"温度",i_flash:"Flash",i_syslog:"Syslog",
 p_state:"状态",p_disabled:"已禁用",p_up:"已连接",p_txgb:"TX 正常 / 错误",p_rxgb:"RX 正常 / 错误",
 p_pkts:"个包",p_module:"模块",p_temp:"温度",p_vcc:"供电电压",p_txbias:"TX 偏置电流",p_txpower:"TX 光功率",
 p_rxpower:"RX 光功率",p_txfault:"TX 故障",p_txdis:"TX 禁用",p_rxlos:"RX 信号丢失",p_adv:"通告能力",
-pt_title:"端口配置",pt_conn:"已连接设备",pt_speed:"速率",pt_mtu:"MTU",
+pt_title:"端口配置",pt_conn:"已学习设备",pt_speed:"速率",pt_mtu:"MTU",
 pt_sfp_note:"SFP 速率按插槽设置，不会保存到启动配置。",
 pt_name_err:"端口名称: 1-15 个字符，不能包含空格",pt_mtu_err:"MTU 范围为 64-16383",
 stp_title:"生成树",stp_h:"RSTP, 802.1w",stp_version:"版本",stp_v_stp:"STP 兼容",
@@ -365,15 +368,15 @@ th_sel_light:"Selenized claro",th_sel_dark:"Selenized oscuro",
 c_port:"Puerto",c_name:"Nombre",c_link:"Enlace",c_apply:"Aplicar",c_cancel:"Cancelar",c_confirm:"Confirmar",
 c_close:"Cerrar",c_refresh:"Actualizar",c_off:"apagado",c_offc:"Apagado",c_down:"caído",c_on:"Encendido",c_auto:"Auto",c_delete:"Eliminar",
 c_type:"Tipo",c_state:"Estado",c_enabled:"Habilitado",c_load:"Cargar",c_disable:"Deshabilitar",c_sfp:"SFP",
-c_full:"dúplex completo",c_half:"semidúplex",c_devices:"dispositivos",c_yes:"sí",c_no:"no",
+c_full:"dúplex completo",c_half:"semidúplex",c_yes:"sí",c_no:"no",
-d_ports:"Puertos",d_ports_h:"pulsa un puerto para ver detalles",d_system:"Sistema",d_traffic:"Tráfico",
+d_system:"Sistema",d_traffic:"Tráfico",
 d_traffic_h:"paquetes/s, en vivo",d_txpps:"TX pps",d_rxpps:"RX pps",d_txbad:"TX erróneos",d_rxbad:"RX erróneos",
 i_host:"Nombre de host",i_ip:"Dirección IP",i_mask:"Máscara de red",i_gw:"Puerta de enlace",i_mac:"MAC",i_fw:"Firmware",
 i_built:"Compilado",i_hw:"Hardware",i_flash:"Flash",i_syslog:"Syslog",
 p_state:"Estado",p_disabled:"deshabilitado",p_up:"activo",p_txgb:"TX correctos / erróneos",p_rxgb:"RX correctos / erróneos",
 p_pkts:"paquetes",p_module:"Módulo",p_temp:"Temperatura",p_vcc:"Vcc",p_txbias:"Polarización TX",p_txpower:"Potencia TX",
 p_rxpower:"Potencia RX",p_txfault:"Fallo TX",p_txdis:"TX deshabilitado",p_rxlos:"Pérdida RX (LOS)",p_adv:"Anunciado",
-pt_title:"Configuración de puerto",pt_conn:"Conectado",pt_speed:"Velocidad",pt_mtu:"MTU",
+pt_title:"Configuración de puerto",pt_conn:"Dispositivos aprendidos",pt_speed:"Velocidad",pt_mtu:"MTU",
 pt_sfp_note:"La velocidad del SFP se ajusta por ranura y no se guarda en la configuración de inicio.",
 pt_name_err:"Nombre de puerto: 1-15 caracteres, sin espacios",pt_mtu_err:"El MTU debe estar entre 64 y 16383",
 stp_title:"Árbol de expansión",stp_h:"RSTP, 802.1w",stp_version:"Versión",stp_v_stp:"STP compatible",
@@ -477,15 +480,15 @@ th_sel_light:"Clair (sélénisé)",th_sel_dark:"Sombre (sélénisé)",
 c_port:"Port",c_name:"Nom",c_link:"Lien",c_apply:"Appliquer",c_cancel:"Annuler",c_confirm:"Confirmer",
 c_close:"Fermer",c_refresh:"Raffraichir",c_off:"arrêt",c_offc:"Arrêt",c_down:"arrêt",c_on:"Marche",c_auto:"Auto",c_delete:"Supprimer",
 c_type:"Type",c_state:"Etat",c_enabled:"Activé",c_load:"Charger",c_disable:"Désactivé",c_sfp:"SFP",
-c_full:"full",c_half:"half",c_devices:"Equipements",c_yes:"oui",c_no:"non",
+c_full:"full",c_half:"half",c_yes:"oui",c_no:"non",
-d_ports:"Ports",d_ports_h:"Cliquez ou survollez pour plus de détails",d_system:"Système",d_traffic:"Trafic",
+d_system:"Système",d_traffic:"Trafic",
 d_traffic_h:"paquets/s (en direct)",d_txpps:"TX pps",d_rxpps:"RX pps",d_txbad:"TX KO",d_rxbad:"RX KO",
 i_host:"Nom d'hote",i_ip:"Adresse IP",i_mask:"Masque réseau",i_gw:"Passerelle",i_mac:"Adresse MAC",i_fw:"Micro logiciel",
 i_built:"Compilé le",i_hw:"Matériel",i_temp:"Température",i_flash:"Taille Flash",i_syslog:"Journal système",
 p_state:"Etat",p_disabled:"Inactif",p_up:"Actif",p_txgb:"TX bon / mauvais",p_rxgb:"RX bon / mauvais",
 p_pkts:"paquets",p_module:"Module",p_temp:"Température",p_vcc:"Vcc",p_txbias:"TX biais",p_txpower:"TX puissance",
 p_rxpower:"RX puissance",p_txfault:"TX erreur",p_txdis:"TX désactivé",p_rxlos:"RX pertes de signaux",p_adv:"Capacités",
-pt_title:"Configuration du port",pt_conn:"Connecté à",pt_speed:"Vitesse",pt_mtu:"MTU",
+pt_title:"Configuration du port",pt_conn:"Appareils appris",pt_speed:"Vitesse",pt_mtu:"MTU",
 pt_sfp_note:"La vitesse SFP est paramétrée pour le port et n'est pas enregistrée dans la configuration de démarrage.",
 pt_name_err:"Nom du port: 1 à 15 caractères, sans espaces",pt_mtu_err:"MTU doit être comrpis entre 64 et 16383",
 stp_title:"Arborescence",stp_h:"RSTP, 802.1w",stp_version:"Protocole",stp_v_stp:"Compatible STP",
@@ -585,7 +588,7 @@ fw_timeout:"Le commutateur n'est plus joignable depuis 150 s: verifiez l'aliment
 },
 de:{
 nav_dash:"Übersicht",nav_ports:"Ports",nav_stp:"Spanning Tree",nav_stats:"Statistik",
-nav_vlan:"VLANs",nav_l2:"MAC-Tabelle",nav_mirror:"Spiegelung",nav_lag:"LAG",nav_eee:"EEE",
+nav_vlan:"VLANs",nav_l2:"MAC-Tabelle",nav_mirror:"Spiegelung",nav_isolate:"Isolation",nav_lag:"LAG",nav_eee:"EEE",
 nav_bw:"Bandbreite",nav_system:"System",nav_fw:"Firmware",
 hdr_dirty:"ungespeicherte Änderungen",hdr_dirty_t:"Laufende Konfiguration weicht von der Startkonfiguration ab",
 hdr_save:"Im Flash speichern",hdr_save_t:"Laufende Konfiguration dauerhaft im Flash speichern",
@@ -594,15 +597,15 @@ th_sel_light:"Selenized Hell",th_sel_dark:"Selenized Dunkel",
 c_port:"Port",c_name:"Name",c_link:"Link",c_apply:"Übernehmen",c_cancel:"Abbrechen",c_confirm:"Bestätigen",
 c_close:"Schliessen",c_refresh:"Aktualisieren",c_off:"aus",c_offc:"Aus",c_down:"getrennt",c_on:"Ein",c_auto:"Auto",c_delete:"Löschen",
 c_type:"Typ",c_state:"Zustand",c_enabled:"Aktiviert",c_load:"Laden",c_disable:"Deaktivieren",c_sfp:"SFP",
-c_full:"voll",c_half:"halb",c_devices:"Geräte",c_yes:"ja",c_no:"nein",
+c_full:"voll",c_half:"halb",c_yes:"ja",c_no:"nein",
-d_ports:"Ports",d_ports_h:"Port anklicken für Details",d_system:"System",d_traffic:"Datenverkehr",
+d_system:"System",d_traffic:"Datenverkehr",
 d_traffic_h:"Pakete/s, live",d_txpps:"TX Pakete/s",d_rxpps:"RX Pakete/s",d_txbad:"TX fehlerhaft",d_rxbad:"RX fehlerhaft",
 i_host:"Hostname",i_ip:"IP-Adresse",i_mask:"Netzmaske",i_gw:"Gateway",i_mac:"MAC",i_fw:"Firmware",
 i_built:"Erstellt",i_hw:"Hardware",i_temp:"Temperatur",i_flash:"Flash",i_syslog:"Syslog",
 p_state:"Zustand",p_disabled:"deaktiviert",p_up:"verbunden",p_txgb:"TX gut / fehlerhaft",p_rxgb:"RX gut / fehlerhaft",
 p_pkts:"Pakete",p_module:"Modul",p_temp:"Temperatur",p_vcc:"Vcc",p_txbias:"TX-Bias",p_txpower:"Sendeleistung",
 p_rxpower:"Empfangsleistung",p_txfault:"TX-Fehler",p_txdis:"TX deaktiviert",p_rxlos:"RX LOS",p_adv:"Angeboten",
-pt_title:"Port-Konfiguration",pt_conn:"Verbunden",pt_speed:"Geschwindigkeit",pt_mtu:"MTU",
+pt_title:"Port-Konfiguration",pt_conn:"Gelernte Geräte",pt_speed:"Geschwindigkeit",pt_mtu:"MTU",
 pt_sfp_note:"Die SFP-Geschwindigkeit wird pro Steckplatz gesetzt und nicht in der Startkonfiguration gespeichert.",
 pt_name_err:"Port-Name: 1-15 Zeichen, keine Leerzeichen",pt_mtu_err:"MTU muss zwischen 64 und 16383 liegen",
 stp_title:"Spanning Tree",stp_h:"RSTP, 802.1w",stp_version:"Version",stp_v_stp:"STP-kompatibel",
@@ -623,6 +626,7 @@ stp_en_q:"Spanning Tree aktivieren?",
 stp_en_d:"Die Ports starten blockiert und brauchen bis zum doppelten Forward Delay, bis sie weiterleiten; Edge-Ports sind sofort wieder aktiv.",
 stp_dis_q:"Spanning Tree deaktivieren?",stp_dis_d:"Alle Ports leiten sofort weiter; der Schutz vor Netzwerkschleifen entfällt.",
 stp_cost_err:"Pfadkosten müssen zwischen 0 und 200000000 liegen",
+nav_lldp:"LLDP",lldp_enabled:"LLDP aktiv",lldp_title:"Dienststatus",lldp_portname:"Name",lldp_enable:"Pakete senden",
 st_title:"Port-Statistik",st_h:"Summen seit dem Start",st_txg:"TX gut",st_txb:"TX fehlerhaft",st_rxg:"RX gut",
 st_rxb:"RX fehlerhaft",st_details:"Details",st_counters:"MIB-Zähler",st_nonzero:"nur ungleich null",
 st_autoref:"automatisch aktualisieren",st_counter:"Zähler",st_value:"Wert",st_fail:"Zähler konnten nicht geladen werden",
@@ -645,8 +649,12 @@ l2_learned:"gelernt",l2_loading:"lädt...",l2_failed:"Laden fehlgeschlagen",l2_e
 l2_del_t:"Eintrag löschen",l2_flush_q:"Alle gelernten MAC-Einträge löschen?",
 m_title:"Port-Spiegelung",m_active:"aktiv",m_monitor:"Monitor-Port",m_mirror:"Spiegeln",m_both:"Beide",
 m_note:"Beide = RX und TX des Ports auf den Monitor-Port spiegeln.",m_none:"Mindestens einen zu spiegelnden Port wählen",
+iso_title:"Port-Isolation",iso_from:"Von Port",iso_to:"Zu Port",iso_all:"Alle erlauben",
+iso_intro:"Ein Paket, das über einen Port hereinkommt, darf den Switch nur über die Ports verlassen, die in seiner Zeile angehakt sind. Die Isolation wirkt vor der Weiterleitung: Ein nicht angehakter Port ist direkt nicht erreichbar, egal was in der MAC-Tabelle steht.",
+iso_legend:"Das Feld des Ports selbst ist immer erlaubt. Eine rote Portnummer markiert einen Port, der nicht ganz offen ist.",
 lag_hash:"Hash:",lag_note:"Eine LAG braucht mindestens ein Mitglied, um in der Startkonfiguration gespeichert zu werden; eine leere Gruppe zu übernehmen löscht sie.",
 lag_clear_q:"LAG {n} auflösen?",lag_clear_d:"Alle Mitglieds-Ports kehren in den Normalbetrieb zurück.",
+lacp_heading:"LACP (802.3ad)",lag_mode:"Modus",lag_static:"Statisch",lacp_neg:"wird ausgehandelt",lacp_agg:"Aggregator",lacp_members:"aktive Mitglieder",lacp_hint:"LACP: Ports auswählen und Übernehmen drücken, um die Aushandlung zu starten",lacp_actor:"Lokal",lacp_partner:"Partner",lacp_rxstate:"Empfangsstatus",lacp_rx:"Empfangene LACPDUs",lacp_psys:"Partner-System",
 e_title:"Energy Efficient Ethernet",e_adv:"Angeboten",e_lp:"Gegenstelle",e_active:"Aktiv",e_enable:"Aktivieren",
 e_note:"Angebotene und von der Gegenstelle unterstützte Stufen je Geschwindigkeit: 100M, 1G, 2.5G. SFP-Ports unterstützen kein EEE.",
 e_idle:"inaktiv",e_na:"k. A.",
@@ -669,7 +677,8 @@ sy_ip_err:"Ungültige IP / Netzmaske / Gateway",sy_host_err:"Hostname: 1-23 druc
 sy_net_q:"Netzwerkeinstellungen übernehmen?",sy_net_d:"Die Management-IP ändert sich auf {ip}: Diese Seite muss dort neu geöffnet werden.",
 sy_ip_changed:"IP geändert, neu verbinden unter http://{ip}/",sy_dhcp_q:"Auf DHCP umstellen?",
 sy_dhcp_d:"Der Switch bezieht seine Adresse per DHCP. Du musst seine neue IP herausfinden, um dich wieder zu verbinden.",
-sy_sysip_err:"Ungültige IP des Syslog-Servers",sy_sysport_err:"Syslog-Port muss zwischen 1 und 65535 liegen",
+sy_sysip_err:"Ungültige IP des Syslog-Servers",sy_dns1:"DNS-Server",sy_dns2:"Zweiter DNS-Server",sy_dns_err:"Ungültige IP des DNS-Servers",sy_dns_dhcp:"von DHCP: {ip}",sy_sysport_err:"Syslog-Port muss zwischen 1 und 65535 liegen",
+sy_time:"Uhrzeit",sy_ntp:"NTP",sy_ntpsrv:"NTP-Server",sy_ntpsrv_p:"Hostname oder IPv4-Adresse",sy_ntpint:"Abfrageintervall [min]",sy_tz:"Zeitzone",sy_dst:"Sommerzeit",sy_dst_eu:"Europa",sy_dst_us:"USA",sy_now:"Lokale Zeit",sy_sync:"Letzte Synchronisation",sy_ntpaddr:"Server-Adresse",sy_nosync:"nicht synchronisiert",sy_waiting:"warte auf den Server",sy_ago:"vor {n} min",sy_ntp_err:"Hostname oder IPv4-Adresse des NTP-Servers eingeben",sy_ntpint_err:"Abfrageintervall muss zwischen 1 und 1440 liegen",sy_time_note:"Der Switch hat keine batteriegepufferte Uhr: Die Zeit geht bei jedem Neustart verloren und wird neu vom NTP-Server bezogen, sobald das Netzwerk bereit ist. Im Flash speichern, damit die Einstellungen erhalten bleiben.",
 sy_pw_len:"Passwort: 1-20 Zeichen",sy_pw_space:"Das Passwort darf keine Leerzeichen enthalten",sy_pw_match:"Die Passwörter stimmen nicht überein",
 sy_pw_q:"Admin-Passwort ändern?",sy_pw_d:"Gilt sofort für neue Anmeldungen. Im Flash speichern, damit es erhalten bleibt.",
 sy_reboot_q:"Switch neu starten?",sy_reboot_d:"Es gibt UNGESPEICHERTE Änderungen, sie gehen verloren. Zuerst im Flash speichern, wenn du sie behalten willst.",
@@ -808,7 +817,7 @@ var CONF_CMDS=[
   /^port\s+\d{1,2}\s+lldp\s+(permit|block)+$/,
   /^eee\s+(on|off)(\s+\d{1,2})?(\s+(100m|1g|2g5))?$/,
   /^mirror(\s+\d{1,2})(\s+\d{1,2}[tr]?)+$/,/^mirror\s+off$/,
-  /^lag\s+[1-4](\s+\d{1,2})+$/,/^lag\s+[1-4]\s+d$/,/^laghash\s+[1-4](\s+\w+)+$/,
+  /^lag\s+[1-4](\s+\d{1,2})+$/,/^lag\s+[1-4]\s+d$/,/^lag\s+[1-4]\s+lacp(\s+\d{1,2})+$/,/^lag\s+[1-4]\s+lacp\s+off$/,/^laghash\s+[1-4](\s+\w+)+$/,
   /^isolate\s+\d{1,2}(\s+(off|\d{1,2}))+$/,
   /^stp\s+(on|off)$/,/^stp\s+(prio|hello|maxage|fwd|txhold)\s+\d{1,2}$/,
   /^stp\s+version\s+(rstp|stp)$/,
@@ -955,6 +964,7 @@ function pollStatus(){
   });
 }
 var statusPoller=new Poller(pollStatus,2500);
+statusPoller.start();
 function needPorts(fn){
   if(S.n)return fn();
   pollStatus().then(fn).catch(function(){});
@@ -1099,8 +1109,7 @@ function dashStatus(){
   });
 }
 tabHooks.dash={
-  enter:function(){statusPoller.start();pollInfo().catch(function(){})},
+  enter:function(){pollInfo().catch(function(){})},
-  leave:function(){statusPoller.stop()},
   status:dashStatus,
 };
 
@@ -1144,31 +1153,12 @@ function loadMtu(){
     });
   });
 }
-/* One learned MAC is the attached device; several means a switch or AP
- * sits behind the port, so only the count is shown. */
-function portsMacs(){
-  l2Load().then(function(all){
-    var by={};
-    all.forEach(function(e){
-      if(e.pport==="CPU")return;
-      var l=by[e.pport]=by[e.pport]||[];
-      if(l.indexOf(e.mac)<0)l.push(e.mac);
-    });
-    S.ports.forEach(function(p){
-      var el=$("pmac"+(p.portNum-1));
-      if(!el)return;
-      var m=by[p.portNum]||[];
-      el.textContent=!m.length?"-":(m.length===1?m[0]:m.length+" "+t("c_devices"));
-      el.title=m.join("\n");
-    });
-  }).catch(function(){});
-}
-var _macTick=0;
 function portsStatus(){
   buildPorts();
-  if(++_macTick%10===0)portsMacs();
   S.ports.forEach(function(p){
     var i=p.portNum-1,el=$("plink"+i);
+    var mc=$("pmac"+i);
+    if(mc)mc.textContent=parseInt(p.macs,16)&0x1fff;
     if(el)el.innerHTML=linkBadge(p);
     var sel=$("pspd"+i),v=p.isSFP?0:ADVSEL[parseInt(p.adv,2)];
     if(sel&&v&&document.activeElement!==sel)sel.value=v;
@@ -1196,8 +1186,7 @@ function applyPort(i){
   postCmds(cmds).then(loadMtu).catch(function(){});
 }
 tabHooks.ports={
-  enter:function(){statusPoller.start();needPorts(function(){buildPorts();portsMacs()})},
+  enter:function(){needPorts(buildPorts)},
-  leave:function(){statusPoller.stop();l2Gen++},
   status:portsStatus,
 };
 
@@ -1453,8 +1442,7 @@ function statsStatus(){
   });
 }
 tabHooks.stats={
-  enter:function(){statusPoller.start()},
+  leave:function(){if(ctrPoll)ctrPoll.stop()},
-  leave:function(){statusPoller.stop();if(ctrPoll)ctrPoll.stop()},
   status:statsStatus,
 };
 
@@ -1814,6 +1802,15 @@ function buildLag(){
   for(var g=1;g<=4;g++)(function(g){
     var card=h("div",{class:"card"});
     card.appendChild(h("h2",{text:"LAG "+g}));
+    var mr=h("div",{style:"display:flex;gap:10px;flex-wrap:wrap;align-items:center;margin-bottom:10px",class:"small"});
+    mr.appendChild(h("span",{class:"mut",text:t("lag_mode")}));
+    var ms=h("select",{class:"in",id:"lgm"+g});
+    ms.appendChild(h("option",{value:"static",text:t("lag_static")}));
+    ms.appendChild(h("option",{value:"lacp",text:"LACP"}));
+    ms.addEventListener("change",function(){$("lgs"+g).textContent=ms.value==="lacp"?t("lacp_hint"):""});
+    mr.appendChild(ms);
+    card.appendChild(mr);
+    card.appendChild(h("p",{class:"small mono",id:"lgs"+g,style:"margin-bottom:10px"}));
     var pr=h("div",{style:"display:flex;gap:10px;flex-wrap:wrap;margin-bottom:10px"});
     for(var p=1;p<=S.n;p++)pr.appendChild(h("label",null,[
       h("input",{type:"checkbox",id:"lg"+g+"p"+p}),document.createTextNode(" "+p+" "),
@@ -1826,14 +1823,34 @@ function buildLag(){
     });
     card.appendChild(hr);
     card.appendChild(h("button",{class:"ctl pri",text:t("c_apply"),onclick:function(){lagApply(g)}}));
+    card.addEventListener("change",function(){card.dataset.dirty="1"});
     w.appendChild(card);
   })(g);
 }
+var lacpCfg=[0,0,0,0,0];
+function maskPorts(m){var r=[];for(var p=1;p<=S.n;p++)if((m>>S.physToLog[p-1])&1)r.push(p);return r.length?r.join(" "):"-"}
 function lagLoad(){
-  return getJSON("/lag.json").then(function(s){
+  return getJSON("/lacp.json").then(function(c){
+    var tb=$("lacptbl").tBodies[0];
+    tb.innerHTML="";
+    c.lags.forEach(function(lg,i){
+      var g=i+1;
+      lacpCfg[g]=parseInt(lg.cfg,16);
+      if($("lgm"+g).closest(".card").dataset.dirty)return;
+      $("lgm"+g).value=lacpCfg[g]?"lacp":"static";
+      $("lgs"+g).textContent=lacpCfg[g]?"LACP: "+t("lacp_agg")+" "+(lg.aggValid?lg.agg:"("+t("lacp_neg")+")")+", "+t("lacp_members")+" "+maskPorts(parseInt(lg.members,16)):"";
+    });
+    if(c.on)c.ports.forEach(function(p){
+      if(p.lag===255)return;
+      var tr=tb.insertRow();
+      [p.p,p.lag+1,p.a,p.pt,p.rs,parseInt(p.rx,16),p.psys].forEach(function(v){tr.insertCell().textContent=v});
+    });
+    return getJSON("/lag.json");
+  }).then(function(s){
     s.forEach(function(l){
       var g=l.lagNum+1;
-      var members=parseInt(l.members,2);
+      if($("lgm"+g).closest(".card").dataset.dirty)return;
+      var members=lacpCfg[g]||parseInt(l.members,2);
       for(var p=1;p<=S.n;p++)
         $("lg"+g+"p"+p).checked=!!((members>>S.physToLog[p-1])&1);
       var hash=parseInt(l.hash,16);
@@ -1842,21 +1859,25 @@ function lagLoad(){
   });
 }
 function lagApply(g){
-  var cmd="lag "+g,n=0;
+  var lacp=$("lgm"+g).value==="lacp",cmd="lag "+g+(lacp?" lacp":""),n=0,pre=[];
+  delete $("lgm"+g).closest(".card").dataset.dirty;
   for(var p=1;p<=S.n;p++)if($("lg"+g+"p"+p).checked){cmd+=" "+p;n++;}
-  if(!n){
+  if(!lacp&&lacpCfg[g])pre.push("lag "+g+" lacp off");
+  if(lacp&&!n)cmd="lag "+g+" lacp off";
+  if(!n&&!lacp){
     confirmModal(t("lag_clear_q",{n:g}),t("lag_clear_d"),function(){
-      postCmd("lag "+g+" d").then(lagLoad).catch(function(){});
+      postCmds(pre.concat(["lag "+g+" d"])).then(lagLoad).catch(function(){});
     });
     return;
   }
   var hcmd="laghash "+g,nh=0;
   HASHF.forEach(function(f){if($("lg"+g+"h"+f).checked){hcmd+=" "+f;nh++;}});
-  var cmds=[cmd];
+  var cmds=pre.concat([cmd]);
   if(nh)cmds.push(hcmd);
   postCmds(cmds).then(lagLoad).catch(function(){});
 }
-tabHooks.lag={enter:function(){needPorts(function(){buildLag();lagLoad().catch(function(){})})}};
+var lagPoller=new Poller(function(){return lagLoad().catch(function(){})},3000);
+tabHooks.lag={enter:function(){needPorts(function(){buildLag();lagPoller.start()})},leave:function(){lagPoller.stop()}};
 
 
 function lldpLoad(){
@@ -2245,6 +2266,7 @@ function mergeConf(base,texts){
         else drop(/^eee /);
         conf.push(line);return;
       }
+      if((m=line.match(/^lag (\d) lacp off$/))){drop(new RegExp("^lag "+m[1]+" lacp( |$)"));return;}
       if(line==="mirror off"){drop(/^mirror /);return;}
       if(!isConfCmd(line))return;
       if((m=line.match(/^ingress (.+)$/))){

html/index.html

@@ -55,11 +55,11 @@ a{color:var(--ac);text-decoration:none}
 #navfoot{padding:10px 16px;border-top:1px solid var(--bd);font-size:12px;color:var(--fg2)}
 #wrap{flex:1;min-width:0;display:flex;flex-direction:column}
 #top{
-  display:flex;align-items:center;gap:10px;padding:10px 20px;
+  display:flex;align-items:center;flex-wrap:wrap;gap:10px;padding:8px 20px;
   background:var(--panel);border-bottom:1px solid var(--bd);position:sticky;top:0;z-index:5;
 }
 #burger{display:none;background:none;border:0;cursor:pointer;padding:4px}
-#ttitle{font-size:16px;font-weight:650;flex:1}
+#ttitle{font-size:16px;font-weight:650;min-width:120px}
 #dirty{
   display:none;font-size:12px;font-weight:600;color:var(--warn);
   border:1px solid var(--warn);border-radius:20px;padding:2px 10px;
@@ -112,19 +112,21 @@ label.row span.lb{width:110px;flex:none;color:var(--fg2);font-size:13px}
 }
 .switch input:checked+i{background:var(--ok)}
 .switch input:checked+i:before{transform:translateX(15px)}
-#strip{display:flex;gap:8px;flex-wrap:wrap;padding:4px 0 2px}
+#strip{display:flex;gap:6px;flex:1;min-width:0;overflow-x:auto;scrollbar-width:thin}
+.port:first-child{margin-left:auto}
+.port:last-child{margin-right:auto}
 .port{
-  width:46px;border:2px solid var(--bd);border-radius:7px;padding:5px 0 3px;
+  width:40px;border:2px solid var(--bd);border-radius:7px;padding:3px 0 2px;
   text-align:center;cursor:pointer;background:var(--panel2);position:relative;
 }
-.port.sfp{width:56px}
+.port.sfp{width:50px}
-.port .pn{font-weight:650;font-size:13px}
+.port .pn{font-weight:650;font-size:12px}
-.port .ps{font-size:10px;color:var(--fg2);display:block;line-height:1.2}
+.port .ps{font-size:9px;color:var(--fg2);display:block;line-height:1.2}
 .port .jack{
-  display:block;width:18px;height:12px;margin:3px auto 2px;border-radius:2px;
+  display:block;width:16px;height:10px;margin:2px auto 1px;border-radius:2px;
-  border:2px solid var(--fg2);border-top-width:5px;opacity:.55;
+  border:2px solid var(--fg2);border-top-width:4px;opacity:.55;
 }
-.port.sfp .jack{width:28px;height:10px;border-top-width:3px}
+.port.sfp .jack{width:24px;height:9px;border-top-width:3px}
 .port.up{border-color:var(--pc);background:color-mix(in srgb,var(--pc) 10%,var(--panel2))}
 .port.up .jack{border-color:var(--pc);opacity:1}
 .port.up .ps{color:var(--pc);font-weight:600}
@@ -183,6 +185,10 @@ button.danger{background:var(--bad);color:#fff;border-color:transparent}
   #ttitle{font-size:14px;overflow:hidden;text-overflow:ellipsis;white-space:nowrap}
   #dirty{padding:2px 7px}
 }
+@media (max-width:720px){
+  #ttitle{flex:1}
+  #strip{order:3;flex-basis:100%}
+}
 </style>
 <script>
 (function(){
@@ -215,15 +221,13 @@ button.danger{background:var(--bad);color:#fff;border-color:transparent}
       <svg width="20" height="20" viewBox="0 0 24 24" fill="none" stroke="var(--fg)" stroke-width="2"><path d="M4 6h16M4 12h16M4 18h16"/></svg>
     </button>
     <span id="ttitle"></span>
+    <div id="strip"></div>
     <span id="dirty" data-i18n="hdr_dirty" data-i18n-t="hdr_dirty_t">unsaved changes</span>
     <button class="ctl pri" id="saveBtn" data-i18n="hdr_save" data-i18n-t="hdr_save_t">Save to flash</button>
   </header>
 
   <main>
     <section class="tab act" id="tab-dash">
-      <div class="card"><h2><span data-i18n="d_ports">Ports</span> <span class="hint" data-i18n="d_ports_h">click a port for details</span></h2>
-        <div id="strip"></div>
-      </div>
       <div class="grid2">
         <div class="card"><h2 data-i18n="d_system">System</h2><table class="t" id="sysinfo"></table></div>
         <div class="card"><h2><span data-i18n="d_traffic">Traffic</span> <span class="hint" data-i18n="d_traffic_h">packets/s, live</span></h2>
@@ -237,7 +241,7 @@ button.danger{background:var(--bad);color:#fff;border-color:transparent}
     <section class="tab" id="tab-ports">
       <div class="card"><h2 data-i18n="pt_title">Port configuration</h2>
         <div class="scrollx"><table class="t" id="ptable">
-          <thead><tr><th data-i18n="c_port">Port</th><th data-i18n="c_name">Name</th><th data-i18n="c_link">Link</th><th data-i18n="pt_conn">Connected</th><th data-i18n="pt_speed">Speed</th><th data-i18n="c_enabled">Enabled</th><th data-i18n="pt_mtu">MTU</th><th></th></tr></thead>
+          <thead><tr><th data-i18n="c_port">Port</th><th data-i18n="c_name">Name</th><th data-i18n="c_link">Link</th><th data-i18n="pt_conn">Devices learned</th><th data-i18n="pt_speed">Speed</th><th data-i18n="c_enabled">Enabled</th><th data-i18n="pt_mtu">MTU</th><th></th></tr></thead>
           <tbody></tbody></table></div>
         <p class="small mut" style="margin-top:8px" data-i18n="pt_sfp_note">SFP speed is set per slot and is not saved in the startup config.</p>
       </div>
@@ -356,6 +360,11 @@ button.danger{background:var(--bad);color:#fff;border-color:transparent}
 
     <section class="tab" id="tab-lag">
       <div id="lagwrap" class="grid2"></div>
+      <div class="card" style="margin-top:14px"><h2 data-i18n="lacp_heading">LACP (802.3ad)</h2>
+        <div class="scrollx"><table class="t" id="lacptbl">
+          <thead><tr><th data-i18n="c_port">Port</th><th>LAG</th><th data-i18n="lacp_actor">Actor</th><th data-i18n="lacp_partner">Partner</th><th data-i18n="lacp_rxstate">RX state</th><th data-i18n="lacp_rx">LACPDUs received</th><th data-i18n="lacp_psys">Partner system</th></tr></thead>
+          <tbody></tbody></table></div>
+      </div>
       <p class="small mut" style="margin-top:10px" data-i18n="lag_note">A LAG needs at least one member to be saved in the startup config; applying an empty group clears it.</p>
     </section>
 

httpd/httpd.c

@@ -1036,6 +1036,8 @@ void httpd_appcall(void)
 				send_stp();
 			} else if (is_word(q, "/lldp.json")) {
 				send_lldp();
+			} else if (is_word(q, "/lacp.json")) {
+				send_lacp();
 			} else if (is_word(q, "/vlanlist")) {
 				send_vlanlist();
 			} else if (is_word(q, "/config")) {

httpd/page_impl.c

@@ -14,6 +14,7 @@
 #include "version.h"
 #include "machine.h"
 #include "rtl837x_stp.h"
+#include "rtl837x_lacp.h"
 #include "page_impl.h"
 #include "syslog.h"
 
@@ -736,6 +737,53 @@ void send_stp(void)
 	slen += strtox(outbuf + slen, "]}");
 }
 
+void send_lacp(void)
+{
+	dbg_string("send_lacp called\n");
+	slen = strtox(outbuf, HTTP_RESPONCE_JSON);
+
+	slen += strtox(outbuf + slen, "{\"on\":");
+	bool_to_html(lacpEnabled);
+	slen += strtox(outbuf + slen, ",\"lags\":[");
+	for (uint8_t l = 0; l < LACP_NUM_LAGS; l++) {
+		slen += strtox(outbuf + slen, "{\"cfg\":\"");
+		byte_to_html(lacp_lag_ports[l] >> 8);
+		byte_to_html(lacp_lag_ports[l]);
+		slen += strtox(outbuf + slen, "\",\"aggValid\":");
+		bool_to_html(lacp_agg_valid[l]);
+		slen += strtox(outbuf + slen, ",\"agg\":\"");
+		for (uint8_t j = 0; j < MAC_ADDR_LEN; j++)
+			byte_to_html(lacp_agg_sys[l][j]);
+		slen += strtox(outbuf + slen, "\",\"members\":\"");
+		byte_to_html(lacp_members_last[l] >> 8);
+		byte_to_html(lacp_members_last[l]);
+		slen += strtox(outbuf + slen, "\"},");
+	}
+	slen -= 1; // remove comma
+	slen += strtox(outbuf + slen, "],\"ports\":[");
+	for (uint8_t i = machine.min_port; i <= machine.max_port; i++) {
+		slen += strtox(outbuf + slen, "{\"p\":");
+		itoa_html(machine.log_to_phys_port[i]);
+		slen += strtox(outbuf + slen, ",\"lag\":");
+		itoa_html(lacp_port_lag[i]);
+		slen += strtox(outbuf + slen, ",\"a\":\"");
+		byte_to_html(lacp_actor_state[i]);
+		slen += strtox(outbuf + slen, "\",\"pt\":\"");
+		byte_to_html(lacp_partner_state[i]);
+		slen += strtox(outbuf + slen, "\",\"rs\":");
+		itoa_html(lacp_rx_state[i]);
+		slen += strtox(outbuf + slen, ",\"rx\":\"");
+		byte_to_html(lacp_rx_count[i] >> 8);
+		byte_to_html(lacp_rx_count[i]);
+		slen += strtox(outbuf + slen, "\",\"psys\":\"");
+		for (uint8_t j = 0; j < MAC_ADDR_LEN; j++)
+			byte_to_html(lacp_partner_sys[i][j]);
+		slen += strtox(outbuf + slen, "\"},");
+	}
+	slen -= 1; // remove comma
+	slen += strtox(outbuf + slen, "]}");
+}
+
 void send_lldp(void)
 {
 	dbg_string("send_lldp called\n");
@@ -1063,6 +1111,9 @@ void send_status(void)
 		slen += strtox(outbuf + slen, "\",\"rxB\":\"0x");
 		STAT_GET(STAT_COUNTER_ERR_PKTS, i);
 		reg_to_html(RTL837X_STAT_V_HIGH);	// 32bit RX packet errors
+
+		slen += strtox(outbuf + slen, "\",\"macs\":\"0x");
+		reg_to_html(RTL837X_L2_LRN_PORT_CONSTRT_CNT + (i << 2));
 		slen += strtox(outbuf + slen, "\"}");
 		if (i < machine.max_port)
 			char_to_html(',');

httpd/page_impl.h

@@ -24,6 +24,7 @@ void send_cmd_log(void);
 void send_lag(void);
 void send_stp(void);
 void send_lldp(void);
+void send_lacp(void);
 void send_vlanlist(void);
 
 /*  Convert only the lower nibble to ascii HEX char.

machine.h

@@ -3,55 +3,19 @@
 
 #include <stdint.h>
 
-/*
+#define MACHINE_STR_HELPER(x)  #x
- * Select your machine type below
+#define MACHINE_STR(x) MACHINE_STR_HELPER(x)
- */
-// Legacy KP-9000 4+2 targets. Prefer the PCB-revision-specific targets below.
-// #define MACHINE_KP_9000_6XHML_X2
-// #define MACHINE_KP_9000_6XH_X2
 
-// KP-9000 4+2 targets by PCB silkscreen revision.
-// #define MACHINE_KP_9000_6XH_X2_V1_1
-// #define MACHINE_KP_9000_6XHML_X2_V1_1
-// #define MACHINE_KP_9000_6XH_X2_V1_2
-// #define MACHINE_KP_9000_6XHML_X2_V1_2
-// #define MACHINE_KP_9000_6XH_X2_V2_1
-// #define MACHINE_KP_9000_6XHML_X2_V2_1
 
-// #define MACHINE_KP_9000_6XH_X
+#define MACHINE_DEF_DIR machine
-// #define MACHINE_KP_9000_9XH_X_EU
+
-// #define MACHINE_KP_9000_9XHML_X_V2_2
+#ifndef MACHINE_NAME
-// #define MACHINE_KP_9000_9XHML_X_V3_1
+	#define MACHINE_NAME default_machine
-// #define MACHINE_KP_9000_9XHML_X_V3_2
+#endif
-// #define MACHINE_SWGT024_V2_0_MANAGED
+
-// #define MACHINE_SWGT024_V2_0_UNMANAGED
+#define MACHINE_INC(dir,file) MACHINE_STR(dir/file)
-// #define MACHINE_TRENDNET_TEG_S562
+
-// #define MACHINE_HG0402XG_V1_1
+#include  MACHINE_INC(MACHINE_DEF_DIR,MACHINE_NAME.h)
-// #define MACHINE_SWTG018AS_A_V_2_0
-// #define MACHINE_SWTGW218AS
-// #define MACHINE_PCB_SWTG018AS_V2_1_0
-// #define MACHINE_PCB_K0402WS_V3
-// #define MACHINE_PCB_K0402WS_V2
-// #define MACHINE_K0501W_V2_0
-// #define MACHINE_LIANGUO_ZX_SWTGW215AS
-// #define MACHINE_ZX310S_4T2XH
-// #define MACHINE_ZX310S_4T2XT
-// #define MACHINE_STEAMEMO_IG204_V1
-// #define MACHINE_DEFAULT_8C_1SFP
-// #define MACHINE_HI_K0801WS
-// #define MACHINE_FNS1200P
-// #define MACHINE_PCB_SWTG024AS_A_2_0_1
-// #define MACHINE_ONT_S207CW_62TS_SE
-// #define MACHINE_SWTG024AS_A_2_0_1_5C_1SFP
-// #define MACHINE_SWTG024AS_V2_0
-// #define MACHINE_FG_4GT_2SX_V2_0
-// #define MACHINE_FG_8GT_1SX
-// #define MACHINE_LIANGUO_HYWS_SGT0108S
-// #define MACHINE_POE_2G080110GS
-// #define MACHINE_PB_2132
-// #define MACHINE_HASIVO_S600W_4GT_2XGT_SE
-// #define MACHINE_HASIVO_S1100WP_8GT_1SX_SE
-// #define MACHINE_F7008_2_5
 
 #define LED_27 1
 // SYSTEM LED
@@ -100,6 +64,12 @@ struct machine {
 	uint8_t led_mux_custom;
 	uint8_t led_mux[28];
 	uint32_t mac_flash_offset;
+	// Read the flash with single-IO (CMD_FREAD) instead of DIO for MMIO/code
+	// fetch. Set for boards whose flash chip is not usable in DIO mode, which
+	// shows up as a board that does not boot at all, garbled console output or
+	// random resets. Costs management-plane speed only, the ASIC keeps
+	// forwarding in hardware.
+	uint8_t flash_sio;
 };
 
 struct machine_runtime

machine/2G08110GSN.c

@@ -0,0 +1 @@
+SWTG018AS_A_V_2_0.c

machine/2G08110GSN.h

@@ -0,0 +1,6 @@
+#ifndef _MACHINE_2G08110GSN_H_
+#define _MACHINE_2G08110GSN_H_
+
+#define MACHINE_MODEL "MokerLink 2G08110GSN"
+
+#endif

machine/2G5F4_10G2_V1_01.c

@@ -0,0 +1,54 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 0,
+	.min_port = 3,
+	.max_port = 8,
+	.n_sfp = 2,
+	/* Same 2M-PCB43-V1.1 board family as the KP-9000-6XH-X2 (see
+	 * machine/KP_9000_6XHML_X2.c), but the two SFP+ cages (physical ports 5 and
+	 * 6) are wired the other way round: physical 5 is on SDS1, physical 6 on
+	 * SDS0. Copper ports 1-4 match the KP-9000 layout. */
+	.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
+	.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
+	.is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
+	// Left SFP cage (physical port 5) = SDS1
+	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+	.sfp_port[0].pin_los = GPIO37,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+	// Right SFP cage (physical port 6) = SDS0
+	.sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
+	.sfp_port[1].pin_los = GPIO10_LED10,
+	.sfp_port[1].pin_tx_disable = GPIO_NA,
+	.sfp_port[1].sds = 0,
+	.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
+	/* The board has a 3-hole reset button footprint, but it is unpopulated and
+	 * the case has no opening for it, so reset_pin stays GPIO_NA. GPIO54, the
+	 * reset pin on the KP-9000 layout, reads as permanently pressed here. */
+	.reset_pin = GPIO_NA,
+	/* The fitted T25S40 does not work in DIO mode on this board, so read the flash
+	 * with single-IO; see doc/devices/2G5F4_10G2_V1.01.md. */
+	.flash_sio = 1,
+	.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	/* Conditions for LED on:
+	 * dual led orange: ledset_0 & ledset_2
+	 * dual led green: ledset_2 & !ledset_0
+	 * single right led green: ledset_0 & !ledset_1
+	 *
+	 * Measured on this board: LED-ID0 is the copper blue LED, LED-ID1 the
+	 * copper white one (setting LED-ID0 to 0 killed blue while leaving white on
+	 * at 2.5G only) and LED-ID2 carries the SFP single LED. The "solid"
+	 * conditions (LINK/speed) barely drive the LEDs here and ACT is what
+	 * actually lights them, which is why the white LED used to glow faintly at
+	 * non-2.5G speeds; the fix for that is LED_GLB_IO_EN bit 6, set in
+	 * machine_init.c. */
+	.led_sets = { { LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
+			LEDS_2G5 | LEDS_LINK | LEDS_10G,
+			LEDS_1G | LEDS_LINK,
+			0 },
+		    },
+};

machine/2G5F4_10G2_V1_01.h

@@ -0,0 +1,6 @@
+#ifndef _MACHINE_2G5F4_10G2_V1_01_H_
+#define _MACHINE_2G5F4_10G2_V1_01_H_
+
+#define MACHINE_MODEL "2G5F4_10G2_V1.01 / SGT0204S"
+
+#endif

machine/DEFAULT_8C_1SFP.c

@@ -0,0 +1 @@
+KP_9000_9XH_X_EU.c

machine/DEFAULT_8C_1SFP.h

@@ -0,0 +1,6 @@
+#ifndef _MACHINE_DEFAULT_8C_1SFP_H_
+#define _MACHINE_DEFAULT_8C_1SFP_H_
+
+#define MACHINE_MODEL "8+1 SFP Port Switch"
+
+#endif

machine/F7008_2_5.c

@@ -0,0 +1,41 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 1,
+	.min_port = 0,
+	.max_port = 8,
+	.n_sfp = 1,
+	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
+	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
+	.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+	.sfp_port[0].pin_los = GPIO37,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+	.reset_pin = GPIO_NA,
+	.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.led_sets = {
+		{	/* SET0 */
+			LEDS_2G5 | LEDS_LINK,				/* LEDID0 - green: 2.5G link */
+			LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,	/* LEDID1 - yellow: traffic */
+			0,
+			0,
+		},
+		{	/* SET1 - SFP+ */
+			LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_LINK,
+			LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_1G | LEDS_LINK | LEDS_ACT,
+			0,
+			0,
+		},
+	},
+	.led_mux_custom = 1,
+	.led_mux = {
+		0x00, 0x01, 0x04, 0x05, 0x08, 0x09, 0x0c, 0x02,
+		0x0d, 0x10, 0x11, 0x02, 0x14, 0x02, 0x02, 0x15,
+		0x02, 0x02, 0x18, 0x02, 0x02, 0x19, 0x02, 0x02,
+		0x1c, 0x1d, 0x02, 0x02,
+	},
+};

machine/F7008_2_5.h

@@ -0,0 +1,6 @@
+#ifndef _MACHINE_F7008_2_5_H_
+#define _MACHINE_F7008_2_5_H_
+
+#define MACHINE_MODEL "F7008-2.5 8+1 SFP Port Switch"
+
+#endif

machine/FG_4GT_2SX_V2_0.c

@@ -0,0 +1,66 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 0,
+	.min_port = 3,
+	.max_port = 8,
+	.n_sfp = 2,
+	.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
+	.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
+	.is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
+	
+	// Left SFP port
+	.sfp_port[0].pin_detect = GPIO38, 
+	.sfp_port[0].pin_los = GPIO_NA, 
+	.sfp_port[0].sds = 1, 
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+
+	// Right SFP port
+	.sfp_port[1].pin_detect = GPIO37,
+	.sfp_port[1].pin_los = GPIO_NA, 
+	.sfp_port[1].sds = 0, 
+	.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
+
+	.reset_pin = GPIO_NA,
+	.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
+	/* Ports 1-4 RJ45 use set 0, port 5-6 SFP uses set 1 
+	 * Ports 1-4: Green: 2.5GBit, Amber: 10/100/1000MBit
+	 * Ports 5-6: Green: 100MBit-10GBit
+	 */
+	.led_sets = { 
+			{
+				LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+				LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+				0,
+				LEDS_2G5 | LEDS_LINK | LEDS_ACT
+			},
+			{  
+				LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+				LEDS_10G | LEDS_LINK,
+				0,
+				LEDS_COL | LEDS_DUPLEX
+			},
+			{
+				LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+				LEDS_2G5 | LEDS_1G | LEDS_LINK,
+				LEDS_5G | LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+				LEDS_10G | LEDS_LINK | LEDS_ACT
+			},
+			{
+				LEDS_TX,
+				LEDS_RX,
+				LEDS_10G | LEDS_TWO_PAIR_5G | LEDS_5G | LEDS_TWO_PAIR_2G5 |
+					LEDS_2G5 | LEDS_TWO_PAIR_1G | LEDS_1G | LEDS_500M | LEDS_100M | LEDS_10M | LEDS_ACT,
+				LEDS_10G | LEDS_TWO_PAIR_5G | LEDS_5G | LEDS_TWO_PAIR_2G5 |
+					LEDS_2G5 | LEDS_TWO_PAIR_1G | LEDS_1G | LEDS_500M | LEDS_100M | LEDS_10M | LEDS_LINK
+			},
+	 },
+	.led_mux_custom = 1,
+	.led_mux = {
+				0x0c, 0x0d, 0x0e, 0x10, 0x11, 0x12, 0x14, 0x3f, 0x15, 0x16,
+				0x18, 0x0e, 0x19, 0x11, 0x12, 0x1a, 0x15, 0x16, 0x1c, 0x19,
+				0x1a, 0x1d, 0x1d, 0x1e, 0x1e, 0x20, 0x21, 0x22
+		},
+	};

machine/FG_4GT_2SX_V2_0.h

@@ -0,0 +1,6 @@
+#ifndef _MACHINE_FG_4GT_2SX_V2_0_H_
+#define _MACHINE_FG_4GT_2SX_V2_0_H_
+
+#define MACHINE_MODEL "FG-4GT-2SX_V2.0"
+
+#endif

machine/FG_8GT_1SX.c

@@ -0,0 +1,45 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 1,
+	.min_port = 0,
+	.max_port = 8,
+	.n_sfp = 1,
+	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
+	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
+	.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.sfp_port[0].pin_detect = GPIO38,
+	.sfp_port[0].pin_los = GPIO_NA,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+	.reset_pin = GPIO_NA,
+	.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.led_sets = {
+		/*
+			Ports 1-8: Left Amber 10/100/1000MBit (Vendor no 10M, but we add it)
+					   Right Green 2.5GBit
+			SFP-port: Any speed
+		*/
+		{
+			LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+			LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+			0,
+			0,
+		},
+		{
+			LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+			0,
+			0,
+			0,
+		},
+	},
+	.led_mux_custom = 1,
+	.led_mux = {
+		0x00, 0x01, 0x04, 0x05, 0x08, 0x09, 0x0c, 0x09, 0x0d, 0x10,
+		0x11, 0x0e, 0x14, 0x11, 0x12, 0x15, 0x15, 0x16, 0x18, 0x19,
+		0x1a, 0x19, 0x1d, 0x1e, 0x1c, 0x1d, 0x20, 0x21,
+	},
+};

machine/FG_8GT_1SX.h

@@ -0,0 +1,6 @@
+#ifndef _MACHINE_FG_8GT_1SX_H_
+#define _MACHINE_FG_8GT_1SX_H_
+
+#define MACHINE_MODEL "FG-8GT-1SX"
+
+#endif

machine/FNS1200P.c

@@ -0,0 +1 @@
+PCB_K0402WS_V2.c

machine/FNS1200P.h

@@ -0,0 +1,6 @@
+#ifndef _MACHINE_FNS1200P_H_
+#define _MACHINE_FNS1200P_H_
+
+#define MACHINE_MODEL "FNS-1200P"
+
+#endif

machine/GT_ST018M.c

@@ -0,0 +1 @@
+SWTG018AS_A_V_2_0.c

machine/GT_ST018M.h

@@ -0,0 +1,6 @@
+#ifndef _MACHINE_GT_ST018M_H_
+#define _MACHINE_GT_ST018M_H_
+
+#define MACHINE_MODEL "GoodTop GT-ST018M"
+
+#endif

machine/GT_ST024M.c

@@ -0,0 +1 @@
+PCB_SWTG024AS_A_2_0_1.c

machine/GT_ST024M.h

@@ -0,0 +1,6 @@
+#ifndef _MACHINE_GT_ST024M_H_
+#define _MACHINE_GT_ST024M_H_
+
+#define MACHINE_MODEL "GoodTop GT-ST024M"
+
+#endif

machine/HASIVO_S1100P_8GT_1SX_S.c

@@ -0,0 +1,40 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 1,
+	.mac_flash_offset = 0x1FC000,
+	.min_port = 0,
+	.max_port = 8,
+	.n_sfp = 1,
+	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
+	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
+	.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.sfp_port[0].pin_detect = GPIO38,
+	.sfp_port[0].pin_los = GPIO37,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+	.reset_pin = GPIO54_ACL_BIT2_EN,
+	.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.led_sets = {
+		{
+			LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, // LED0: orange
+			0,
+			LEDS_2G5 | LEDS_LINK | LEDS_ACT, // LED2: green
+			0
+		},
+		{
+			LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT, // SFP LED0: green (both SFP LEDs are green)
+			0, 0, 0
+		}
+	},
+	.led_mux_custom = 1,
+	.led_mux = {
+		0x00, 0x02, 0x04, 0x06, 0x08, 0x0a, 0x0c, 0x09,
+		0x0e, 0x10, 0x12, 0x0e, 0x14, 0x11, 0x12, 0x16,
+		0x15, 0x16, 0x18, 0x19, 0x1a, 0x1a, 0x1d, 0x1e,
+		0x1c, 0x1e, 0x20, 0x21
+	},
+};

machine/HASIVO_S1100P_8GT_1SX_S.h

@@ -0,0 +1,6 @@
+#ifndef _MACHINE_HASIVO_S1100P_8GT_1SX_S_H_
+#define _MACHINE_HASIVO_S1100P_8GT_1SX_S_H_
+
+#define MACHINE_MODEL "Hasivo S1100P-8GT-1SX-S"
+
+#endif

machine/HASIVO_S1100WP_8GT_1SX_SE.c

@@ -0,0 +1 @@
+SWTGW218AS.c

machine/HASIVO_S1100WP_8GT_1SX_SE.h

@@ -0,0 +1,6 @@
+#ifndef _MACHINE_HASIVO_S1100WP_8GT_1SX_SE_H_
+#define _MACHINE_HASIVO_S1100WP_8GT_1SX_SE_H_
+
+#define MACHINE_MODEL "Hasivo S1100WP-8GT-1SX-SE"
+
+#endif

machine/HASIVO_S600W_4GT_2XGT_SE.c

@@ -0,0 +1,43 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+    .machine_name = MACHINE_MODEL,
+    .isRTL8373 = 0,
+    .min_port = 3,
+    .max_port = 8,
+    .n_sfp = 0,
+    .n_10g = 2,
+    .log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
+    .phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
+    .is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 0},
+    .reset_pin = GPIO54_ACL_BIT2_EN,
+    .high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
+    .port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1 },
+    /* Ports 1-4: Green: 2.5GBit, Orange: 10/100/1000MBit
+     * Ports 5-6: Green: 10GBit, Orange: 5/2.5GBit, None: 10/100/1000MBit
+     */
+    .led_sets = {
+        {
+            LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, // Yellow
+            LEDS_2G5 | LEDS_LINK, // Green
+            LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK, // Orange
+            0, // Unused
+        },
+        {
+            LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, // Yellow
+            LEDS_10G | LEDS_LINK, // Green
+            LEDS_5G | LEDS_2G5 | LEDS_LINK, // Orange
+            0, // Unused
+        },
+    },
+    .led_mux_custom = 1,
+    .led_mux = {
+        0x3f, 0x3f, 0x3f, 0x3f, 0x3f,
+        0x3f, 0x3f, 0x3f, 0x0f, 0x20,
+        0x21, 0x22, 0x10, 0x11, 0x12,
+        0x14, 0x15, 0x16, 0x18, 0x19,
+        0x1a, 0x1c, 0x1d, 0x1e, 0x0c,
+        0x0d, 0x0e, 0x23
+    },
+
+};

machine/HASIVO_S600W_4GT_2XGT_SE.h

@@ -0,0 +1,6 @@
+#ifndef _MACHINE_HASIVO_S600W_4GT_2XGT_SE_H_
+#define _MACHINE_HASIVO_S600W_4GT_2XGT_SE_H_
+
+#define MACHINE_MODEL "Hasivo S600W-4GT-2XGT-SE"
+
+#endif

machine/HC_SWTG124AS.c

@@ -0,0 +1 @@
+PCB_SWTG024AS_A_2_0_1.c

machine/HC_SWTG124AS.h

@@ -0,0 +1,6 @@
+#ifndef _MACHINE_HC_SWTG124AS_H_
+#define _MACHINE_HC_SWTG124AS_H_
+
+#define MACHINE_MODEL "Horaco HC-SWTG124AS"
+
+#endif

machine/HG0402XG_V1_1.c

@@ -0,0 +1,38 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 0,
+	.min_port = 3,
+	.max_port = 8,
+	.n_sfp = 2,
+	.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
+	.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
+	.is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
+	.sfp_port[0].pin_detect = 50,
+	.sfp_port[0].pin_los = 10,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
+	.sfp_port[1].pin_detect = 30,
+	.sfp_port[1].pin_los = 51,
+	.sfp_port[1].pin_tx_disable = GPIO_NA,
+	.sfp_port[1].sds = 0,
+	.sfp_port[1].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+	.reset_pin = GPIO_NA,
+	.high_leds = { .mux = LED_27 , .enable = LED_27 | LED_29 },
+	.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
+	/* The Ethernet ports have 1 amber LED (left) and 1 green LED (right)
+	 * The SFP ports have also 1 amber LED and 1 green LED
+	 * Ethernet ports use LED-set 0, SFP ports use LED-set 1
+	 */
+	.led_sets = { { LEDS_10M | LEDS_LINK | LEDS_ACT,
+			LEDS_1G | LEDS_100M | LEDS_10M | LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+			LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+			0 },
+			{ LEDS_100M | LEDS_10M | LEDS_LINK,
+			LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
+			LEDS_10G | LEDS_LINK,
+			0 },
+		    },
+};

machine/HG0402XG_V1_1.h

@@ -0,0 +1,6 @@
+#ifndef _MACHINE_HG0402XG_V1_1_H_
+#define _MACHINE_HG0402XG_V1_1_H_
+
+#define MACHINE_MODEL "HG0402XG V1.1"
+
+#endif

machine/HI_K0402WS.c

@@ -0,0 +1,46 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 0,
+	.min_port = 3,
+	.max_port = 8,
+	.n_sfp = 2,
+	.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
+	.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
+	.is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
+	
+	// Left SFP port
+	.sfp_port[0].pin_detect = GPIO38, 
+	.sfp_port[0].pin_los = GPIO_NA, 
+	.sfp_port[0].sds = 1, 
+	.sfp_port[0].i2c =  I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+
+	// Right SFP port
+	.sfp_port[1].pin_detect = GPIO37,
+	.sfp_port[1].pin_los = GPIO_NA, 
+	.sfp_port[1].sds = 0, 
+	.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
+
+	.reset_pin = GPIO_NA,
+	.high_leds = { .mux =  LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
+	.led_sets = { 
+			{
+				LEDS_2G5 | LEDS_LINK | LEDS_10M | LEDS_ACT,
+				LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
+				LEDS_1G | LEDS_LINK, 
+				0 
+			},
+			{  
+				LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK,
+				LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_ACT,
+				0,
+				0
+			},
+	 },
+	.led_mux_custom = 1,
+	.led_mux = {
+				0x00,0x01,0x04,0x05,0x08,0x09,0x0c,0x3f,0x0d,0x10,0x11,0x0e,0x14,0x11,0x12,0x15,0x15,0x16,0x18,0x19,0x1a,0x19,0x1d,0x1e,0x1c,0x1d,0x20,0x21
+		},
+	};

machine/HI_K0402WS.h

@@ -0,0 +1,6 @@
+#ifndef _MACHINE_HI_K0402WS_H_
+#define _MACHINE_HI_K0402WS_H_
+
+#define MACHINE_MODEL "PCB-K0402WS-V3.0"
+
+#endif

machine/HI_K0801WS.c

@@ -0,0 +1,45 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+    .machine_name = MACHINE_MODEL,
+    .isRTL8373 = 1,
+    .min_port = 0,
+    .max_port = 8,
+    .n_sfp = 1,
+    .log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
+    .phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
+    .is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+
+    .sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+    .sfp_port[0].pin_los = GPIO37,
+    .sfp_port[0].pin_tx_disable = GPIO_NA,
+    .sfp_port[0].sds = 1,
+    .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+    .reset_pin = GPIO_NA,
+
+    .high_leds = {
+        .mux = LED_27 | LED_29,
+        .enable = LED_28_SYS | LED_29
+    },
+
+    /* Ports 1-8 use set 0, port 9 SFP uses set 1 */
+    .port_led_set = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+
+    .led_sets = {
+        {   /* Set 0: RJ45 copper ports
+             * Amber = 2.5G
+             * Green = 1G/100M/10M with activity
+             */
+            LEDS_2G5 | LEDS_LINK | LEDS_ACT, /* Amber */
+            0,
+            LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, /* Green */
+            0
+        },
+        {   /* Set 1: SFP port, single green LED for all valid speeds */
+            LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+            0,
+            0,
+            0
+        },
+    },
+};

machine/HI_K0801WS.h

@@ -0,0 +1,6 @@
+#ifndef _MACHINE_HI_K0801WS_H_
+#define _MACHINE_HI_K0801WS_H_
+
+#define MACHINE_MODEL "Hi-Source HI-k0801WS"
+
+#endif

machine/K0501W_V2_0.c

@@ -0,0 +1,34 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 0,
+	.min_port = 3,
+	.max_port = 8,
+	.n_sfp = 1,
+	.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
+	.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
+	.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+	.sfp_port[0].pin_los = GPIO37,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c =  I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+
+	.reset_pin = GPIO_NA,
+	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.led_sets = {
+		{
+			LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+			0,
+			LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+			0
+		},
+		{
+			LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+			0,
+			0,
+			0
+		},
+	 },
+};

machine/K0501W_V2_0.h

@@ -0,0 +1,6 @@
+#ifndef _MACHINE_K0501W_V2_0_H_
+#define _MACHINE_K0501W_V2_0_H_
+
+#define MACHINE_MODEL "K0501W V2.0"
+
+#endif

machine/KP_9000_6XHML_X2.c

@@ -0,0 +1,37 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 0,
+	.min_port = 3,
+	.max_port = 8,
+	.n_sfp = 2,
+	.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
+	.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
+	.is_sfp = {0, 0, 0, 1, 0, 0, 0, 0, 2},
+	// Left SFP port (5)
+	.sfp_port[0].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
+	.sfp_port[0].pin_los = GPIO10_LED10,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 0,
+	.sfp_port[0].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
+	// Right SFP port (6)
+	.sfp_port[1].pin_detect = GPIO30_ACL_BIT3_EN,
+	.sfp_port[1].pin_los = GPIO37,
+	.sfp_port[1].pin_tx_disable = GPIO_NA,
+	.sfp_port[1].sds = 1,
+	.sfp_port[1].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+	.reset_pin = GPIO54_ACL_BIT2_EN,
+	.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	/* Conditions for LED on:
+	 * dual led orange: ledset_0 & ledset_2
+	 * dual led green: ledset_2 & !ledset_0
+	 * single right led green: ledset_0 & !ledset_1
+	*/
+	.led_sets = { { LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
+			LEDS_2G5 | LEDS_LINK | LEDS_10G,
+			LEDS_1G | LEDS_LINK,
+			0 },
+		    },
+};

machine/KP_9000_6XHML_X2.h

@@ -0,0 +1,6 @@
+#ifndef _MACHINE_KP_9000_6XHML_X2_H_
+#define _MACHINE_KP_9000_6XHML_X2_H_
+
+#define MACHINE_MODEL "keepLink KP-9000-6XHML-X2"
+
+#endif

machine/KP_9000_6XHML_X2_V1_1.c

@@ -0,0 +1 @@
+KP_9000_6XHML_X2.c

machine/KP_9000_6XHML_X2_V1_1.h

@@ -0,0 +1,6 @@
+#ifndef _MACHINE_KP_9000_6XHML_X2_V1_1_H_
+#define _MACHINE_KP_9000_6XHML_X2_V1_1_H_
+
+#define MACHINE_MODEL "keepLink KP-9000-6XHML V1.1"
+
+#endif

machine/KP_9000_6XHML_X2_V1_2.c

@@ -0,0 +1 @@
+KP_9000_6XHML_X2.c

machine/KP_9000_6XHML_X2_V1_2.h

@@ -0,0 +1,6 @@
+#ifndef _MACHINE_KP_9000_6XHML_X2_V1_2_H_
+#define _MACHINE_KP_9000_6XHML_X2_V1_2_H_
+
+#define MACHINE_MODEL "keepLink KP-9000-6XHML V1.2"
+
+#endif

machine/KP_9000_6XHML_X2_V2_1.c

@@ -0,0 +1 @@
+KP_9000_6XH_X2.c

machine/KP_9000_6XHML_X2_V2_1.h

@@ -0,0 +1,6 @@
+#ifndef _MACHINE_KP_9000_6XHML_X2_V2_1_H_
+#define _MACHINE_KP_9000_6XHML_X2_V2_1_H_
+
+#define MACHINE_MODEL "keepLink KP-9000-6XHML V2.1"
+
+#endif

machine/KP_9000_6XH_X.c

@@ -0,0 +1,28 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 0,
+	.min_port = 3,
+	.max_port = 8,
+	.n_sfp = 1,
+	.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
+	.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
+	.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+	.sfp_port[0].pin_los = GPIO37,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+	.reset_pin = GPIO_NA,
+	/* Conditions for LED on:
+	 * dual led orange: ledset_0 & ledset_2
+	 * dual led green: ledset_2 & !ledset_0
+	 * single right led green: ledset_0 & !ledset_1
+	*/
+	.led_sets = { { LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
+			LEDS_2G5 | LEDS_LINK | LEDS_10G,
+			LEDS_1G | LEDS_LINK,
+			0 },
+		    },
+};

machine/KP_9000_6XH_X.h

@@ -0,0 +1,6 @@
+#ifndef _MACHINE_KP_9000_6XH_X_H_
+#define _MACHINE_KP_9000_6XH_X_H_
+
+#define MACHINE_MODEL "keepLink KP-9000-6XH-X"
+
+#endif

machine/KP_9000_6XH_X2.c

@@ -0,0 +1,48 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 0,
+	.min_port = 3,
+	.max_port = 8,
+	.n_sfp = 2,
+	.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
+	.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
+	.is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
+
+	// Left SFP port
+	.sfp_port[0].pin_detect = GPIO38,
+	.sfp_port[0].pin_los = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+
+	// Right SFP port
+	.sfp_port[1].pin_detect = GPIO37,
+	.sfp_port[1].pin_los = GPIO_NA,
+	.sfp_port[1].sds = 0,
+	.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
+
+	.reset_pin = GPIO48_I2C_SCL1,   // Button-Switch is unpopulated on PCB, but can be added manually (hole in case is already there)
+	.high_leds = { .mux =  LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
+	.led_sets = {
+			{
+				LEDS_2G5 | LEDS_LINK,												// Left LED (Amber)
+				LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,   // Right LED (Green)
+				0,
+				0
+			},
+			{
+				LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+				0,
+				0,
+				0
+			},
+	 },
+	.led_mux_custom = 1,
+	.led_mux = {
+				0x00,0x01,0x04,0x05,0x08,0x09,0x0c,0x3f,0x0d,0x10,
+				0x11,0x0e,0x14,0x11,0x12,0x15,0x15,0x16,0x18,0x19,
+				0x1a,0x19,0x1d,0x1e,0x1c,0x1d,0x20,0x21
+		},
+	};

machine/KP_9000_6XH_X2.h

@@ -0,0 +1,6 @@
+#ifndef _MACHINE_KP_9000_6XH_X2_H_
+#define _MACHINE_KP_9000_6XH_X2_H_
+
+#define MACHINE_MODEL "keepLink KP-9000-6XH-X2"
+
+#endif

machine/KP_9000_6XH_X2_V1_1.c

@@ -0,0 +1 @@
+KP_9000_6XHML_X2.c

machine/KP_9000_6XH_X2_V1_1.h

@@ -0,0 +1,6 @@
+#ifndef _MACHINE_KP_9000_6XH_X2_V1_1_H_
+#define _MACHINE_KP_9000_6XH_X2_V1_1_H_
+
+#define MACHINE_MODEL "keepLink KP-9000-6XH V1.1"
+
+#endif