From eedb0dec01233835fa983faa7dab18e4387bbe90 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= <opensource@vdorst.com>
Date: Sun, 15 Feb 2026 21:09:16 +0100
Subject: [PATCH] SWGT024 v2.0: Fix LED and RESET defines for managed version

Original firmware used for RJ45:
* Amber leds only for 2.5GBit link/act.
* Green leds only for other speeds.
---
 machine.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/machine.c b/machine.c
index 5b809f5..7d0167d 100644
--- a/machine.c
+++ b/machine.c
@@ -149,29 +149,29 @@ __code const struct machine machine = {
 	.is_sfp= {0, 0, 0, 2, 0, 0, 0, 0, 1},
 	// Left SFP port (J4)
 	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
-	.sfp_port[0].pin_los = GPIO37,
+	.sfp_port[0].pin_los = GPIO_NA,
 	.sfp_port[0].pin_tx_disable = GPIO_NA,
 	.sfp_port[0].sds = 1,
 	.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, /* GPIO 39 */
 	// Right SFP port (J2)
 	.sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
-	.sfp_port[1].pin_los = GPIO51_I2C_SDA2_UART1_RX,
+	.sfp_port[1].pin_los = GPIO_NA,
 	.sfp_port[1].pin_tx_disable = GPIO_NA,
 	.sfp_port[1].sds = 0,
 	.sfp_port[1].i2c = { .sda = GPIO41_I2C_SDA3_MDIO1, .scl = GPIO40_I2C_SCL3_MDC1 }, /* GPIO 40 */
-	.reset_pin = GPIO36_PWM_OUT,
+	.reset_pin = GPIO54_ACL_BIT2_EN,
 	.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
 	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 0},
-	/* Conditions for LED on:
-	 * dual led orange: ledset_0 & ledset_2
-	 * dual led green: ledset_2 & !ledset_0
-	 * single right led green: ledset_0 & !ledset_1
-	*/
-	.led_sets = { { LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
-			LEDS_2G5 | LEDS_LINK | LEDS_10G,
-			LEDS_1G | LEDS_LINK,
-			0 },
-		    },
+	.led_sets = {
+		{
+			/* Green LED */
+			LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
+			0,
+			/* Amber LED */
+			LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+			0
+		},
+	},
 };
 
 void machine_custom_init(void) { }