mirror of
https://github.com/logicog/RTLPlayground.git
synced 2026-08-30 14:52:51 +08:00
Merge main into KP-9000 PCB revision split
This commit is contained in:
@@ -1,4 +1,10 @@
|
||||
# SWTG018AS-A V2.0
|
||||
## Brands
|
||||
| Brand | Type |Managed| PCB | Flash | Chip RTL |
|
||||
|--------|------------------|-------|------------------|-----------------|---------------|
|
||||
| Ampcom | SWTG018AS-A V2.0 | No | SWTG018AS-A V2.0 | 2MB | 8273N + 8224N |
|
||||
| Horaco | HC-SWTGW218AS-A | Yes | SWTG018AS-A V2.0 | 2MB(25Q16JVSIQ) | 8273N + 8224N |
|
||||
|
||||
|
||||
The following is a documentation for the unmanaged switch marked as `SWTG018AS-A V2.0`.
|
||||
It is e.g. sold under the Ampcom brand, but no branh-markings are found on the device.
|
||||
|
||||
@@ -0,0 +1,49 @@
|
||||
### SWTG024AS-V2.0
|
||||
|
||||
## Brands
|
||||
|Brand|Type|Managed|PCB|Flash|Chip RTL|
|
||||
|---|---|---|---|---|---|
|
||||
| hongyavision | LG-SG5T1 | No | PCB-SWTG024AS-V2.0_16895 | 25Q40 | 8272 |
|
||||
|
||||
### Label specifications
|
||||
|
||||
- **Name**:
|
||||
- **Ports**:
|
||||
- 5 × RJ45: 10/100/1000/2500 Mbps
|
||||
- 1 × SFP+: 1000 / 2500 / 10000 Mbps
|
||||
- **Power**: 12V DC, 1A 5525 connector
|
||||
|
||||
<img src="photos/SWTG024AS-V2.0/label.jpg" width="300" />
|
||||
|
||||
### What works
|
||||
The device is fully supported:
|
||||
- ALL 2.5GBASE-T RJ45 ports work at 10/100/1000/2500 Mbps
|
||||
- The SFP+ port supports 1G, 2.5G and 10G modules
|
||||
- LEDs work with the same indiciations as the OEM firmware
|
||||
- Online update does not work with 512KiB flash.
|
||||
### PCB overview
|
||||
|
||||
**Board markings**
|
||||
- Top silkscreen: PCB-SWTG024AS-V2.0
|
||||
|
||||
Top side
|
||||
|
||||
<img src="photos/SWTG024AS-V2.0/pcb_top.jpg" width="300" />
|
||||
|
||||
Bottom
|
||||
|
||||
<img src="photos/SWTG024AS-V2.0/pcb_bottom.jpg" width="300" />
|
||||
|
||||
### J1, serial console
|
||||
|
||||
| `J1` pin | Signal |
|
||||
| -------- | ----------- |
|
||||
| 1 | GND |
|
||||
| 2 | RX (Input) |
|
||||
| 3 | TX (Output) |
|
||||
|
||||
Note,`R52`、`R53`may not be installed.You need to bridge them using either solder or resistors.
|
||||
|
||||
## Power supply
|
||||
|
||||
Input power is delivered via barell plug, `12V 1A` adapter was provided.
|
||||
@@ -6,6 +6,7 @@
|
||||
| Mokerlink | ZX-SWTGW218AS | Yes| SWTG118AS-V2.0-16029 | 2MB (FM25Q16A)| 8273N + 8224N |
|
||||
| Sodola | | | | | |
|
||||
| Horaco | | | | | |
|
||||
| XikeStor | SKS3200-8E1X | Yes | SWTG118AS-V2.1-17462 | 2MB (25Q16JVSIQ) | |
|
||||
|
||||
|
||||
## Photos
|
||||
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 3.2 MiB |
Binary file not shown.
|
After Width: | Height: | Size: 9.7 MiB |
Binary file not shown.
|
After Width: | Height: | Size: 36 MiB |
Reference in New Issue
Block a user