add REALHD_PSW8_25MG support

machine/PCB_AFGW_SWTG218ANS_V_2_0_2.c

@@ -0,0 +1,31 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	MACHINE_COMMON_SETTING,
+	.mac_flash_offset = 0x1FC000,
+	.n_sfp = 1,
+	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
+	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
+	.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.sfp_port[0].pin_detect = GPIO38,
+	.sfp_port[0].pin_los = GPIO_NA,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+	.reset_pin = GPIO48_I2C_SCL1,
+	.high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.led_mux = { 0x00, 0x01, 0x04, 0x05, 0x08, 0x09, 0x0c, 0x09, 0x0d, 0x10, 0x11, 0x0e, 0x14, 0x11, 0x12, 0x15, 0x15, 0x16, 0x18, 0x19, 0x1a, 0x19, 0x1d, 0x1e, 0x1c, 0x1d, 0x20, 0x21 },
+	.led_mux_custom = 1,
+	.led_sets = { { LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+			LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+			LEDS_DUPLEX,
+			LEDS_2G5 | LEDS_LINK | LEDS_ACT
+		      },
+		      { LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT,
+			LEDS_10G | LEDS_LINK | LEDS_ACT,
+			LEDS_2G5 | LEDS_LINK,
+			LEDS_COL | LEDS_DUPLEX
+		      },
+		},
+};