Merge pull request #27 from vDorst/doc_2M-PCB23-V3_1-managed

Add docs: 2M-PCB23-V3.1-managed
2026-08-30 14:52:51 +08:00 · 2025-12-01 22:30:06 +01:00
parent 1c78d32493 17fdbf39f0
commit e63d1bf577
3 changed files with 133 additions and 0 deletions
@@ -0,0 +1,133 @@
 ### 2M-PCB23-V3.1
 ## Brands
 |Brand|Type|Managed|PCB|Flash|Chip RTL|
 |---|---|---|---|---|---|
 | keepLINK | KP-9000-9XHML-X | Yes|  2M-PCB23-V3.1 | 2M| 8273N + 8224N |
 # Connectors
 |`J4` SFP PINs | Signal | Component | GPIO | Notes |
 |---|---|---|---|---|
 |2|	TX_FAULT	        | | --- | | 
 |3|	TX_DISABLE	      | | --- | Pull down - 0R |
 |4|	MODDEF2 – SDA     |	b-r273 | GPIO39 | |
 |5|	MODDEF1 – SCL     | b-r274 | GPIO40 | |
 |6|	MODDEF0 – PRESENT | B-R275 | GPIO38 |  |
 |7|	RATE SEL          |	| ---    |  | 
 |8|	LOS	              | B-R276 | GPIO38 |  | 
 |9|	TO?               | | ---    |  |
 Note: component numbering `<L>-<REFDES>-<SIDE>`
 * L: Layer, T=Top, B=Bottom
 * REFDEES: full silkscreen like `R123`
 * SIDE: Side of the component. when the rj45 are facing towards you are you can read the silkscreen normal.
  L = Left, R=right, B=bottom, T=top or P with a pin number.
 ### T8, serial console
 |`T9` pin|GPIO|Signal|
 |---|---|---|
 | 1 | GPIO31 | U0TXD (Output) |
 | 2 | GND | PWR |
 | 3 | GPIO32 | U0RXD (Input) |
 | 4 | 3V3 | PWR |
 ### T7
 |`T7` pin|what|Signal|
 |---|---|---|
 | 1 | GPIO | |
 | 2 | GND    | |
 | 3 | GPIO | |
 | 4 | 3V3    | |
 | 5 | GPIO | |
 | 6 | GPIO | |
 ### T9
 |`T9` SMI | Signal | Component | GPIO | Notes |
 |---|---|---|---|---|
 |1|	MDO	| SMI-MDO | GPIO41 | | 
 |2|	GND	| PWR | | |
 |3|	MDC |	SMI-MDC | GPio40 | |
 ### T10
 |`T10` pin|what|Signal|
 |---|---|---|
 | 1 | GPIO49 | |
 | 2 | GPIO47 | |
 | 3 | 3V3    | |
 | 4 | GPIO48 | |
 | 5 | GND    | |
 | 6 | GPIO46 | |
 # Reset ciruit
 Reset-line found at `T-D6-L`, `T-R83`, `T-R97`, `T-R94`, `T-R93` active-low.
 # GPIO
 | HEX VAL. | GPIO   | Component | What |  | GPIO | Component | What |
 | -------- | ------ |  ---- | ---- | ---- | ---- | ---- | ---- |
 | 00000001 | GPIO00 | T-R34-R, P1-LED-YL      |?      |   | GPIO32 | B-r126-r  | U0RXD |
 | 00000002 | GPIO01 | T-R99-R, P1-LED-GR      |?      |   | GPIO33 |  |  |
 | 00000004 | GPIO02 |                         |?      |   | GPIO34 | B-R172, To RTL8225 | Already driver HIGH INT?  |
 | 00000008 | GPIO03 | T-R113-R, P2-LED-GR     |?      |   | GPIO35 | B-R173, To RTL8225 | Easy to pulldown Reset? |
 | 00000010 | GPIO04 | T-R115-R, P3-LED-YL     |?      |   | GPIO36 || |  |
 | 00000020 | GPIO05 | T-R117-R, P3-LED-GR     |?      |   | GPIO37 | To RTL8225 | Already driver low I2C-SCL?   |  |
 | 00000040 | GPIO06 |                         |?      |   | GPIO38 | sfp-6 via B-R275, sfp-8 via B-R276 |  |
 | 00000080 | GPIO07 |                         |?      |   | GPIO39 | sfp-4, b-r273, B-r143 |  |
 | 00000100 | GPIO08 |                         |       |   | GPIO40 | T9-2, sfp-5 b-r274, B-r146  | SMI-MDC  |
 | 00000200 | GPIO09 |                         |LEDx[^1] | | GPIO41 | T9-1, | SMI-MDO , B-r143  |
 | 00000400 | GPIO10 |                         |         | | GPIO42 | U6?8?-P6, T-R | SPI-MEMORY, CLK |
 | 00000800 | GPIO11 |                         |LEDx[^1] | | GPIO43 | U6?8?-P5, T-R | SPI-MEMORY, DI,IO0 |
 | 00001000 | GPIO12 |                         |LEDx[^1] | | GPIO44 | U6?8?-P2, T-R | SPI-MEMORY, DO,IO1 |
 | 00002000 | GPIO13 |                         |LEDx[^1] | | GPIO45 | U6?8?-P1, T-R | SPI-MEMORY, CS  |
 | 00004000 | GPIO14 |                         |LEDx[^1] | | GPIO46 | T10-6 |  |
 | 00008000 | GPIO15 |                         |LEDx[^1] | | GPIO47 | T10-2 |  |
 | 00010000 | GPIO16 |                         |LEDx[^1] | | GPIO48 | T10-4, J6 (BUTTON RESET) |  |
 | 00020000 | GPIO17 |                         |LEDx[^1] | | GPIO49 | T10-1 |  |
 | 00040000 | GPIO18 |                         |LEDx[^1] | | GPIO50 |  |  |
 | 00080000 | GPIO19 |                         |LEDx[^1] | | GPIO51 |  |  |
 | 00100000 | GPIO20 |                         |LEDx[^1] | | GPIO52 |  |  |
 | 00200000 | GPIO21 | P7-LED-GR, B-R139       |LEDx[^1] | | GPIO53 |  |  |
 | 00400000 | GPIO22 |                         |LEDx[^1] | | GPIO54 |  |  |
 | 00800000 | GPIO23 |                         |LEDx[^1] | | GPIO55 |  |  |
 | 01000000 | GPIO24 | P8-led-yellow,b-r154    |LEDx     | | GPIO56 |  |  |
 | 02000000 | GPIO25 |                         |         | | GPIO57 |  |  |
 | 04000000 | GPIO26 |                         |LEDx     | | GPIO58 |  |  |
 | 08000000 | GPIO27 |                         |?        | | GPIO59 |  |  |
 | 10000000 | GPIO28 |                         |         | | GPIO60 |  |  |
 | 20000000 | GPIO29 |                         |         | | GPIO61 |  |  |
 | 40000000 | GPIO30 |                         |SFP-DETE | | GPIO62 | To RTL8225 | Already driver INT?   |  |
 | 80000000 | GPIO31 |  B-r129-r?              |U0TXD    | | GPIO63 |  |  |
 ## GPIO Register Input value
 GPIO 1: 0a7ffbdd
 GPIO 0: effb6dff
 # LEDs
 | NAME | COMPONENTS | GPIO |
 | ---- | ---------- | ---- |
 | SYSTEM |  | ? | 
 | SFP |  | ? | 
 # Power supply
 Board has two supply rails.
 `0.95` and `3.3` volt.
 ## `0.95` Core Voltage.
 Voltage is crated by a `MP2225GJ` Buck converter.
 0.95V must be within 3%.
 ## `3.3` Voltage
 Voltage is crated by a `MP2225GJ` Buck converter.
 3.3V must be within 4.5%.
 Chip can deliver up to 5A and the sweetspot is at 2A.
 So higher power SFP-modules should work.
 [^1]: LEDs are found by just plugin a RJ45 connector and see with cmd `gpio` the status change. But the bit pattern for port 1,2 are diffrent from port 3,4.