Merge pull request #301 from zytstudio/MACHINE_FG_4GT_2SX_V2_0

Add FG-4GT-2SX_V2.0

doc/devices/FG-4GT-2SX_V2.0.md

@@ -0,0 +1,39 @@
+# FG-4GT-2SX_V2.0
+
+Following is documentation for unmanaged switch marked as `FG-4GT-2SX_V2.0`.
+
+Original software is running UART on 9600 baud rate.
+
+## Brands
+
+* Ruiying RY-4GT-2SX
+
+<img src="photos/FG-4GT-2SX_V2.0/RY-4GT-2SX_label.jpg" width="300" />
+
+## What works
+
+- All four 2.5GBASE-T RJ45 ports at 10/100/1000/2500 Mbps  
+- Both SFP ports supporting 1G, 2.5G and 10G modules 
+- LEDs
+
+## PCB overview
+
+**Board markings**  
+
+- Top silkscreen: FG-4GT-2SX_V2.0
+
+Front panel
+
+<img src="photos/FG-4GT-2SX_V2.0/chassis-front.jpg" width="300" />
+
+Top side
+
+<img src="photos/FG-4GT-2SX_V2.0/PCB-top.jpg" width="300" />
+
+Bottom
+
+<img src="photos/FG-4GT-2SX_V2.0/PCB-bottom.jpg" width="300" />
+
+## Power supply
+
+Input power is delivered via barell plug, `12V 1A` adapter was provided.

doc/supported_devices.md

@@ -19,6 +19,7 @@ The following devices have been tested and are fully working:
 | LIANGUO  | SWTG024AS 	     | No 	   | [SWTG024AS-v2.0-17452](https://github.com/logicog/RTLPlayground/blob/main/doc/devices/SWTG024AS.md) 	            | 0.5M 	| 4 + 2 |
 | Lianguo  | ZX-SWTGW215AS 	 | Yes 	   | [PCB-SWTG115AS-V2.0](https://github.com/logicog/RTLPlayground/blob/main/doc/devices/SWTGW215AS.md) 	            | 2M    |	5 + 1 |
 | Mokerlink| ZX-SWTGW218AS 	 | Yes 	   | [SWTG118AS-V2.0-16029](https://github.com/logicog/RTLPlayground/blob/main/doc/devices/SWTGW218AS.md)             |	2M 	  | 8 + 1 |
+| Ruiying | RY-4GT-2SX | No | [FG-4GT-2SX_V2.0](https://github.com/logicog/RTLPlayground/blob/main/doc/devices/FG-4GT-2SX_V2.0.md) |	4M | 4 + 2 |
 | Sodola 	 | SL-SWTG124AS-D  | Yes 	   | [SWTG024AS-v2.0-17452](https://github.com/logicog/RTLPlayground/blob/main/doc/devices/SWTG024AS.md) 	            |	2M 	  | 4 + 2 |
 | Steamemo | IG204-V1        | No      | [PB-2131](https://github.com/logicog/RTLPlayground/blob/main/doc/devices/STEAMEMO_IG204_V1.md)                   |       | 4 + 2 |
 | TrendNet | TEG-S562        | No      | [TEG-S563/EU H/W: V1.0R](https://github.com/logicog/RTLPlayground/blob/main/doc/devices/TEG-S562.md)             | 2M    | 4 + 2 |

machine.c

@@ -1063,6 +1063,76 @@ void machine_custom_init(void) {
 	REG_SET(RTL837X_PIN_MUX_0, 0x30db68bf);
 }
 
+#elif defined MACHINE_FG_4GT_2SX_V2_0
+__code const struct machine machine = {
+	.machine_name = "FG-4GT-2SX_V2.0",
+	.isRTL8373 = 0,
+	.min_port = 3,
+	.max_port = 8,
+	.n_sfp = 2,
+	.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
+	.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
+	.is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
+	
+	// Left SFP port
+	.sfp_port[0].pin_detect = GPIO38, 
+	.sfp_port[0].pin_los = GPIO_NA, 
+	.sfp_port[0].sds = 1, 
+	.sfp_port[0].i2c =  { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, 
+
+	// Right SFP port
+	.sfp_port[1].pin_detect = GPIO37,
+	.sfp_port[1].pin_los = GPIO_NA, 
+	.sfp_port[1].sds = 0, 
+	.sfp_port[1].i2c = { .sda = GPIO41_I2C_SDA3_MDIO1, .scl = GPIO40_I2C_SCL3_MDC1 }, 
+
+	.reset_pin = GPIO_NA,
+	.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
+	/* Ports 1-4 RJ45 use set 0, port 5-6 SFP uses set 1 
+	 * Ports 1-4: Green: 2.5GBit, Amber: 10/100/1000MBit
+	 * Ports 5-6: Green: 100MBit-10GBit
+	 */
+	.led_sets = { 
+			{
+				LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+				LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+				0,
+				LEDS_2G5 | LEDS_LINK | LEDS_ACT
+			},
+			{  
+				LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+				LEDS_10G | LEDS_LINK,
+				0,
+				LEDS_COL | LEDS_DUPLEX
+			},
+			{
+				LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+				LEDS_2G5 | LEDS_1G | LEDS_LINK,
+				LEDS_5G | LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+				LEDS_10G | LEDS_LINK | LEDS_ACT
+			},
+			{
+				LEDS_TX,
+				LEDS_RX,
+				LEDS_10G | LEDS_TWO_PAIR_5G | LEDS_5G | LEDS_TWO_PAIR_2G5 |
+					LEDS_2G5 | LEDS_TWO_PAIR_1G | LEDS_1G | LEDS_500M | LEDS_100M | LEDS_10M | LEDS_ACT,
+				LEDS_10G | LEDS_TWO_PAIR_5G | LEDS_5G | LEDS_TWO_PAIR_2G5 |
+					LEDS_2G5 | LEDS_TWO_PAIR_1G | LEDS_1G | LEDS_500M | LEDS_100M | LEDS_10M | LEDS_LINK
+			},
+	 },
+	.led_mux_custom = 1,
+	.led_mux = {
+				0x0c, 0x0d, 0x0e, 0x10, 0x11, 0x12, 0x14, 0x3f, 0x15, 0x16,
+				0x18, 0x0e, 0x19, 0x11, 0x12, 0x1a, 0x15, 0x16, 0x1c, 0x19,
+				0x1a, 0x1d, 0x1d, 0x1e, 0x1e, 0x20, 0x21, 0x22
+		},
+	};
+
+void machine_custom_init(void) {
+	REG_SET(RTL837X_REG_LED_GLB_IO_EN, 0x7624155b);
+}
+
 #else
 	#error "Please select a machine type in machine.h"
 #endif

machine.h

@@ -30,6 +30,7 @@
 // #define MACHINE_PCB_SWTG024AS_A_2_0_1
 // #define MACHINE_SWTG024AS_A_2_0_1_5C_1SFP
 // #define MACHINE_SWTG024AS_V2_0
+// #define MACHINE_FG_4GT_2SX_V2_0
 
 typedef struct {
 	// GPIO pins for SDA/SCL