Merge pull request #248 from zectaiga/swtg024as-a-2-0-1-fixes

Fix SWTG024AS-A 2.0.1 port and LED mapping
This commit is contained in:
feelfree69
2026-05-31 10:42:01 +02:00
committed by GitHub
+27 -19
View File
@@ -794,37 +794,39 @@ __code const struct machine machine = {
.min_port = 3,
.max_port = 8,
.n_sfp = 2,
.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
.is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
.is_sfp = {0, 0, 0, 1, 0, 0, 0, 0, 2},
// Left SFP port
.sfp_port[1].pin_detect = GPIO38,
.sfp_port[1].pin_los = GPIO_NA,
.sfp_port[1].sds = 1,
.sfp_port[1].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 },
// Right SFP port
// SFP port on SDS0 / logical port 3
.sfp_port[0].pin_detect = GPIO37,
.sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 0,
.sfp_port[0].i2c = { .sda = GPIO41_I2C_SDA3_MDIO1, .scl = GPIO40_I2C_SCL3_MDC1 },
// SFP port on SDS1 / logical port 8
.sfp_port[1].pin_detect = GPIO38,
.sfp_port[1].pin_los = GPIO_NA,
.sfp_port[1].pin_tx_disable = GPIO_NA,
.sfp_port[1].sds = 1,
.sfp_port[1].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 },
.reset_pin = GPIO_NA,
.high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
.led_sets = {
{
LEDS_2G5 | LEDS_LINK | LEDS_10M | LEDS_ACT,
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
LEDS_1G | LEDS_LINK,
0
LEDS_2G5 | LEDS_LINK | LEDS_ACT,
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
LEDS_DUPLEX,
LEDS_2G5 | LEDS_LINK | LEDS_ACT
},
{
LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK,
LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_ACT,
0,
0
LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT,
LEDS_10G | LEDS_LINK | LEDS_ACT,
LEDS_2G5 | LEDS_LINK,
LEDS_COL | LEDS_DUPLEX
},
},
.led_mux_custom = 1,
@@ -833,7 +835,13 @@ __code const struct machine machine = {
},
};
void machine_custom_init(void) { }
void machine_custom_init(void)
{
reg_bit_set(RTL837X_REG_LED_GLB_IO_EN, 6);
reg_bit_set(RTL837X_REG_LED_MODE, 17);
reg_bit_clear(RTL837X_REG_LED_MODE, 9);
reg_bit_clear(RTL837X_REG_LED_MODE, 7);
}