gitproxy/RTLPlayground
1
0 Fork 0
mirror of https://github.com/logicog/RTLPlayground.git synced 2026-11-01 18:04:12 +08:00
Code Issues Packages Projects Releases Wiki Activity

restructure machine based upon new naming convention

Browse Source
This commit is contained in:
HL Yi committed 2026-10-30 15:53:09 -05:00
1 parent dd3503dd3e
commit cc72dae6ce
213 files changed
+990 -966
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

machine/pcb/270_NB1_MS206B004A1_REV_A1.c
+36
View File
@@ -0,0 +1,36 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 2,
.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
.is_sfp = {0, 0, 0, 1, 0, 0, 0, 0, 2},
.sfp_port[0].pin_detect = GPIO38,
.sfp_port[0].pin_los = GPIO50_I2C_SCL2_UART1_TX,
.sfp_port[0].pin_tx_disable = GPIO54_ACL_BIT2_EN,
.sfp_port[0].sds = 0,
.sfp_port[0].i2c = I2CBUS( GPIO47_I2C_SDA0, GPIO46_I2C_SCL0 ),
.sfp_port[1].pin_detect = GPIO36_PWM_OUT,
.sfp_port[1].pin_los = GPIO37,
.sfp_port[1].pin_tx_disable = GPIO51_I2C_SDA2_UART1_RX,
.sfp_port[1].sds = 1,
.sfp_port[1].i2c = I2CBUS( GPIO49_I2C_SDA1, GPIO48_I2C_SCL1 ),
.reset_pin = GPIO_NA,
.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
.led_sets = {
{
0, // Unused
LEDS_2G5 | LEDS_LINK | LEDS_ACT, // Green
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, // Amber
0 // Unused
},
{
0, // Unused
0, // Unused
LEDS_10G | LEDS_1G | LEDS_LINK | LEDS_ACT, // Green
0, // Unused
},
},
};
machine/pcb/2G5F4_10G2_V1_01.c
+51
View File
@@ -0,0 +1,51 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 2,
/* Same 2M-PCB43-V1.1 board family as the KP-9000-6XH-X2 (see
* machine/KP_9000_6XHML_X2.c), but the two SFP+ cages (physical ports 5 and
* 6) are wired the other way round: physical 5 is on SDS1, physical 6 on
* SDS0. Copper ports 1-4 match the KP-9000 layout. */
.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
.is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
// Left SFP cage (physical port 5) = SDS1
.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
.sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
// Right SFP cage (physical port 6) = SDS0
.sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
.sfp_port[1].pin_los = GPIO10_LED10,
.sfp_port[1].pin_tx_disable = GPIO_NA,
.sfp_port[1].sds = 0,
.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
/* The board has a 3-hole reset button footprint, but it is unpopulated and
* the case has no opening for it, so reset_pin stays GPIO_NA. GPIO54, the
* reset pin on the KP-9000 layout, reads as permanently pressed here. */
.reset_pin = GPIO_NA,
/* The fitted T25S40 does not work in DIO mode on this board, so read the flash
* with single-IO; see doc/devices/2G5F4_10G2_V1.01.md. */
.flash_sio = 1,
.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 0},
/* Conditions for LED on:
* dual led orange: ledset_0 & ledset_2
* dual led green: ledset_2 & !ledset_0
* single right led green: ledset_0 & !ledset_1
*
* Measured on this board: LED-ID0 is the copper blue LED, LED-ID1 the
* copper white one (setting LED-ID0 to 0 killed blue while leaving white on
* at 2.5G only) and LED-ID2 carries the SFP single LED. The "solid"
* conditions (LINK/speed) barely drive the LEDs here and ACT is what
* actually lights them, which is why the white LED used to glow faintly at
* non-2.5G speeds; the fix for that is LED_GLB_IO_EN bit 6, set in the
* shared machine_custom_init() hook (machine/2G5F4_10G2_V1_01_init.c). */
.led_sets = { { LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
LEDS_2G5 | LEDS_LINK | LEDS_10G,
LEDS_1G | LEDS_LINK,
0 },
},
};
machine/pcb/2G5F_20G_V1_01.c
+33
View File
@@ -0,0 +1,33 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 1,
.log_to_phys_port = {2, 1, 4, 3, 5, 6, 7, 8, 9},
.phys_to_log_port = {1, 0, 3, 2, 4, 5, 6, 7, 8},
.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
.sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA,
.high_leds = { .mux = 0, .enable = 0 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1 },
.led_sets = {
{
LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, // RJ45 Blue LEDs
LEDS_2G5 | LEDS_LINK, // RJ45 White LEDs
0,
0
},
{
LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, // SFP blue LED?
0,
0,
0
},
},
};
machine/pcb/2M_PCB23_V2_2.c
+48
View File
@@ -0,0 +1,48 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 1,
.log_to_phys_port = { 1, 2, 3, 4, 5, 6, 7, 8, 9 },
.phys_to_log_port = { 0, 1, 2, 3, 4, 5, 6, 7, 8 },
.is_sfp = { 0, 0, 0, 0, 0, 0, 0, 0, 1 },
.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
.sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO54_ACL_BIT2_EN,
.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1 },
.led_sets = {
{ /* Set 0 for RJ45 connectors */
/* LED0: Right Green */
LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
/* LED1: Left Orange */
LEDS_2G5 | LEDS_LINK,
/* LED2: Left Green */
LEDS_1G | LEDS_LINK,
/* LED3: None */
0,
}, { /* Set 1 for SFP port */
/* LED0: Single Green "9" LED */
LEDS_2G5 | LEDS_TWO_PAIR_1G | LEDS_1G | LEDS_500M | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G | LEDS_TWO_PAIR_5G | LEDS_5G | LEDS_TWO_PAIR_2G5,
/* LED1: D23 LED on PCB */
LEDS_1G | LEDS_LINK,
/* LED2: D22 LED on PCB */
LEDS_2G5 | LEDS_LINK,
/* LED3: Unused */
LEDS_COL | LEDS_DUPLEX,
}, { /* Set 2: Unused, but set to same things as stock firmware for consistency */
LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
LEDS_1G | LEDS_LINK | LEDS_ACT,
LEDS_2G5 | LEDS_LINK | LEDS_ACT | LEDS_5G,
LEDS_10G | LEDS_ACT | LEDS_LINK,
}, { /* Set 3: Unused, but set to same things as stock firmware for consistency */
LEDS_TX,
LEDS_RX,
LEDS_2G5 | LEDS_TWO_PAIR_1G | LEDS_1G | LEDS_500M | LEDS_100M | LEDS_10M | LEDS_ACT | LEDS_10G | LEDS_TWO_PAIR_5G | LEDS_5G | LEDS_TWO_PAIR_2G5,
LEDS_2G5 | LEDS_TWO_PAIR_1G | LEDS_1G | LEDS_500M | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_10G | LEDS_TWO_PAIR_5G | LEDS_5G | LEDS_TWO_PAIR_2G5,
},
},
};
machine/pcb/2M_PCB23_V3_1.c
+34
View File
@@ -0,0 +1,34 @@
#include "machine_defs.h"
// 2M-PCB23-V3.2 is wired like V3.1 (SFP detection, LEDs, factory MAC location)
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 1,
.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
.sfp_port[0].pin_detect = GPIO38,
.sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO48_I2C_SCL1,
.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
.led_sets = {
{ /* RJ45: First LED, yellow, second LED: green */
LEDS_2G5 | LEDS_LINK,
LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
0,
0,
}, { /* SFP PORT, SINGLE GREEN LED */
LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
0,
0,
0,
}},
.led_mux_custom = 1,
.led_mux = {0x00, 0x01, 0x04, 0x05, 0x08, 0x09, 0x0c, 0x09, 0x0d, 0x10,
0x11, 0x0e, 0x14, 0x11, 0x12, 0x15, 0x15, 0x16, 0x18, 0x19,
0x1a, 0x19, 0x1d, 0x1e, 0x1c, 0x1d, 0x20, 0x21},
.mac_flash_offset = 0x1FC000,
};
machine/pcb/2M_PCB23_V3_2.c
Symlink
+1
View File
@@ -0,0 +1 @@
2M_PCB23_V3_1.c
machine/pcb/2M_PCB43_V1_1.c
+34
View File
@@ -0,0 +1,34 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 2,
.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
.is_sfp = {0, 0, 0, 1, 0, 0, 0, 0, 2},
// Left SFP port (5)
.sfp_port[0].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
.sfp_port[0].pin_los = GPIO10_LED10,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 0,
.sfp_port[0].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
// Right SFP port (6)
.sfp_port[1].pin_detect = GPIO30_ACL_BIT3_EN,
.sfp_port[1].pin_los = GPIO37,
.sfp_port[1].pin_tx_disable = GPIO_NA,
.sfp_port[1].sds = 1,
.sfp_port[1].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO54_ACL_BIT2_EN,
.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 0},
/* Conditions for LED on:
* dual led orange: ledset_0 & ledset_2
* dual led green: ledset_2 & !ledset_0
* single right led green: ledset_0 & !ledset_1
*/
.led_sets = { { LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
LEDS_2G5 | LEDS_LINK | LEDS_10G,
LEDS_1G | LEDS_LINK,
0 },
},
};
machine/pcb/2M_PCB43_V1_2.c
Symlink
+1
View File
@@ -0,0 +1 @@
2M_PCB43_V1_1.c
machine/pcb/2M_PCB43_V2_1.c
+45
View File
@@ -0,0 +1,45 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 2,
.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
.is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
// Left SFP port
.sfp_port[0].pin_detect = GPIO38,
.sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
// Right SFP port
.sfp_port[1].pin_detect = GPIO37,
.sfp_port[1].pin_los = GPIO_NA,
.sfp_port[1].sds = 0,
.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO48_I2C_SCL1, // Button-Switch is unpopulated on PCB, but can be added manually (hole in case is already there)
.high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
.led_sets = {
{
LEDS_2G5 | LEDS_LINK, // Left LED (Amber)
LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, // Right LED (Green)
0,
0
},
{
LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
0,
0,
0
},
},
.led_mux_custom = 1,
.led_mux = {
0x00,0x01,0x04,0x05,0x08,0x09,0x0c,0x3f,0x0d,0x10,
0x11,0x0e,0x14,0x11,0x12,0x15,0x15,0x16,0x18,0x19,
0x1a,0x19,0x1d,0x1e,0x1c,0x1d,0x20,0x21
},
};
machine/pcb/2M_PCB43_V2_1_init.c
+6
View File
@@ -0,0 +1,6 @@
#include "machine_init_defs.h"
void machine_custom_init(void) __banked
{
reg_bit_set(RTL837X_REG_LED_GLB_IO_EN, 6);
}
machine/pcb/2M_PCB51_ML_V1_1.c
+41
View File
@@ -0,0 +1,41 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 1,
.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
.sfp_port[0].pin_detect = GPIO38,
.sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA,
.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
.led_sets = {
{
/* SET0: RJ45 2.5G = amber, 1G/100M/10M = green */
LEDS_2G5 | LEDS_LINK | LEDS_ACT, /* amber */
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, /* green */
0,
0
},
{
/* SET1: SFP+ port = green */
LEDS_2G5 | LEDS_TWO_PAIR_1G | LEDS_1G | LEDS_500M | LEDS_100M | LEDS_10M |
LEDS_LINK | LEDS_ACT | LEDS_10G | LEDS_TWO_PAIR_5G | LEDS_5G | LEDS_TWO_PAIR_2G5,
0,
0,
0
}
},
.led_mux_custom = 1,
.led_mux = { 0x00, 0x01, 0x04, 0x05, 0x08,
0x09, 0x0c, 0x09, 0x0d, 0x10,
0x11, 0x0e, 0x14, 0x11, 0x12,
0x15, 0x15, 0x16, 0x18, 0x19,
0x1a, 0x19, 0x1d, 0x1e, 0x1c,
0x1d, 0x20, 0x21 },
};
machine/pcb/F7008_2_5GPOE_V1_2.c
+38
View File
@@ -0,0 +1,38 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 1,
.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
.sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA,
.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = {0, 0, 0, 0, 0, 0, 0, 0, 1},
.led_sets = {
{ /* SET0 */
LEDS_2G5 | LEDS_LINK, /* LEDID0 - green: 2.5G link */
LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, /* LEDID1 - yellow: traffic */
0,
0,
},
{ /* SET1 - SFP+ */
LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_LINK,
LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_1G | LEDS_LINK | LEDS_ACT,
0,
0,
},
},
.led_mux_custom = 1,
.led_mux = {
0x00, 0x01, 0x04, 0x05, 0x08, 0x09, 0x0c, 0x02,
0x0d, 0x10, 0x11, 0x02, 0x14, 0x02, 0x02, 0x15,
0x02, 0x02, 0x18, 0x02, 0x02, 0x19, 0x02, 0x02,
0x1c, 0x1d, 0x02, 0x02,
},
};
machine/pcb/FG_4GT_2SX_V2_0.c
+63
View File
@@ -0,0 +1,63 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 2,
.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
.is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
// Left SFP port
.sfp_port[0].pin_detect = GPIO38,
.sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
// Right SFP port
.sfp_port[1].pin_detect = GPIO37,
.sfp_port[1].pin_los = GPIO_NA,
.sfp_port[1].sds = 0,
.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA,
.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
/* Ports 1-4 RJ45 use set 0, port 5-6 SFP uses set 1
* Ports 1-4: Green: 2.5GBit, Amber: 10/100/1000MBit
* Ports 5-6: Green: 100MBit-10GBit
*/
.led_sets = {
{
LEDS_2G5 | LEDS_LINK | LEDS_ACT,
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
0,
LEDS_2G5 | LEDS_LINK | LEDS_ACT
},
{
LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
LEDS_10G | LEDS_LINK,
0,
LEDS_COL | LEDS_DUPLEX
},
{
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
LEDS_2G5 | LEDS_1G | LEDS_LINK,
LEDS_5G | LEDS_2G5 | LEDS_LINK | LEDS_ACT,
LEDS_10G | LEDS_LINK | LEDS_ACT
},
{
LEDS_TX,
LEDS_RX,
LEDS_10G | LEDS_TWO_PAIR_5G | LEDS_5G | LEDS_TWO_PAIR_2G5 |
LEDS_2G5 | LEDS_TWO_PAIR_1G | LEDS_1G | LEDS_500M | LEDS_100M | LEDS_10M | LEDS_ACT,
LEDS_10G | LEDS_TWO_PAIR_5G | LEDS_5G | LEDS_TWO_PAIR_2G5 |
LEDS_2G5 | LEDS_TWO_PAIR_1G | LEDS_1G | LEDS_500M | LEDS_100M | LEDS_10M | LEDS_LINK
},
},
.led_mux_custom = 1,
.led_mux = {
0x0c, 0x0d, 0x0e, 0x10, 0x11, 0x12, 0x14, 0x3f, 0x15, 0x16,
0x18, 0x0e, 0x19, 0x11, 0x12, 0x1a, 0x15, 0x16, 0x1c, 0x19,
0x1a, 0x1d, 0x1d, 0x1e, 0x1e, 0x20, 0x21, 0x22
},
};
machine/pcb/FG_4GT_2SX_V2_0_init.c
+6
View File
@@ -0,0 +1,6 @@
#include "machine_init_defs.h"
void machine_custom_init(void) __banked
{
REG_SET(RTL837X_REG_LED_GLB_IO_EN, 0x7624155b);
}
machine/pcb/FG_8GT_1SX.c
+42
View File
@@ -0,0 +1,42 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 1,
.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
.sfp_port[0].pin_detect = GPIO38,
.sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA,
.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = {0, 0, 0, 0, 0, 0, 0, 0, 1},
.led_sets = {
/*
Ports 1-8: Left Amber 10/100/1000MBit (Vendor no 10M, but we add it)
Right Green 2.5GBit
SFP-port: Any speed
*/
{
LEDS_2G5 | LEDS_LINK | LEDS_ACT,
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
0,
0,
},
{
LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
0,
0,
0,
},
},
.led_mux_custom = 1,
.led_mux = {
0x00, 0x01, 0x04, 0x05, 0x08, 0x09, 0x0c, 0x09, 0x0d, 0x10,
0x11, 0x0e, 0x14, 0x11, 0x12, 0x15, 0x15, 0x16, 0x18, 0x19,
0x1a, 0x19, 0x1d, 0x1e, 0x1c, 0x1d, 0x20, 0x21,
},
};
machine/pcb/HG0402XG_V1_1.c
+41
View File
@@ -0,0 +1,41 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 2,
.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
.is_sfp = {0, 0, 0, 1, 0, 0, 0, 0, 2},
// Left SFP port (5)
.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
.sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
// Right SFP port (6)
.sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
.sfp_port[1].pin_los = GPIO_NA,
.sfp_port[1].pin_tx_disable = GPIO_NA,
.sfp_port[1].sds = 0,
.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA,
.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
/* On Ethernet: Left led is orange, right green
* 100M and 1G give right led green with activity
* 2.5GBit adds solid left orange LED
* LEDs for the SFP-ports are the same as for the Ethernet ports
*/
.led_sets = { { LEDS_2G5 | LEDS_LINK | LEDS_ACT,
0,
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
LEDS_2G5 | LEDS_LINK | LEDS_ACT
},
{ LEDS_2G5 | LEDS_TWO_PAIR_1G | LEDS_1G | LEDS_500M | LEDS_100M | LEDS_10M |
LEDS_LINK | LEDS_ACT | LEDS_10G | LEDS_TWO_PAIR_5G | LEDS_5G | LEDS_TWO_PAIR_2G5,
LEDS_1G | LEDS_LINK,
LEDS_LINK,
LEDS_COL | LEDS_DUPLEX
}
}
};
machine/pcb/NONAME_20240111.c
+58
View File
@@ -0,0 +1,58 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 2,
.log_to_phys_port = {0, 0, 0, 5, 4, 3, 2, 1, 6},
.phys_to_log_port = {7, 6, 5, 4, 3, 8, 0, 0, 0},
.is_sfp = {0, 0, 0, 1, 0, 0, 0, 0, 2},
// SFP port on SDS0 / logical port 3
.sfp_port[0].pin_detect = GPIO37,
.sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 0,
.sfp_port[0].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
// SFP port on SDS1 / logical port 8
.sfp_port[1].pin_detect = GPIO38,
.sfp_port[1].pin_los = GPIO_NA,
.sfp_port[1].pin_tx_disable = GPIO_NA,
.sfp_port[1].sds = 1,
.sfp_port[1].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA,
.high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 3, 0, 0, 2, 2, 3},
.mac_flash_offset = 0x1FC000,
.led_sets = {
{ // RJ45 Ports 3-4 (normal wiring)
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
LEDS_2G5 | LEDS_LINK | LEDS_ACT,
0,
0
},
{ // Unused
0,
0,
0,
0
},
{ // RJ45 Ports 1-2 (reversed wiring)
LEDS_2G5 | LEDS_LINK | LEDS_ACT,
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
0,
0
},
{ // SFP Ports 5-6
LEDS_10G | LEDS_LINK | LEDS_ACT,
LEDS_2G5 | LEDS_1G | LEDS_LINK | LEDS_ACT,
0,
0
},
},
.led_mux_custom = 1,
.led_mux = {
0x00,0x01,0x04,0x05,0x08,0x09,0x0c,0x3f,0x0d,0x10,0x11,0x0e,0x14,0x11,0x12,0x15,0x15,0x16,0x18,0x19,0x1a,0x19,0x1d,0x1e,0x1c,0x1d,0x20,0x21
},
};
machine/pcb/NONAME_KP_9000_6XH_X.c
+25
View File
@@ -0,0 +1,25 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 1,
.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
.sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA,
/* Conditions for LED on:
* dual led orange: ledset_0 & ledset_2
* dual led green: ledset_2 & !ledset_0
* single right led green: ledset_0 & !ledset_1
*/
.led_sets = { { LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
LEDS_2G5 | LEDS_LINK | LEDS_10G,
LEDS_1G | LEDS_LINK,
0 },
},
};
machine/pcb/NONAME_KP_9000_9XH_X_EU.c
+22
View File
@@ -0,0 +1,22 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 1,
.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
.sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA,
.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 0},
.led_sets = { { LEDS_2G5 | LEDS_TWO_PAIR_1G | LEDS_1G | LEDS_500M | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G | LEDS_TWO_PAIR_5G | LEDS_5G | LEDS_TWO_PAIR_2G5,
LEDS_2G5 | LEDS_LINK,
LEDS_1G | LEDS_LINK,
LEDS_2G5 | LEDS_LINK | LEDS_ACT },
},
};
machine/pcb/NONAME_S600W_4GT_2XGT_SE.c
+40
View File
@@ -0,0 +1,40 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 0,
.n_10g = 2,
.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 0},
.reset_pin = GPIO54_ACL_BIT2_EN,
.high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1 },
/* Ports 1-4: Green: 2.5GBit, Orange: 10/100/1000MBit
* Ports 5-6: Green: 10GBit, Orange: 5/2.5GBit, None: 10/100/1000MBit
*/
.led_sets = {
{
LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, // Yellow
LEDS_2G5 | LEDS_LINK, // Green
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK, // Orange
0, // Unused
},
{
LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, // Yellow
LEDS_10G | LEDS_LINK, // Green
LEDS_5G | LEDS_2G5 | LEDS_LINK, // Orange
0, // Unused
},
},
.led_mux_custom = 1,
.led_mux = {
0x3f, 0x3f, 0x3f, 0x3f, 0x3f,
0x3f, 0x3f, 0x3f, 0x0f, 0x20,
0x21, 0x22, 0x10, 0x11, 0x12,
0x14, 0x15, 0x16, 0x18, 0x19,
0x1a, 0x1c, 0x1d, 0x1e, 0x0c,
0x0d, 0x0e, 0x23
},
};
machine/pcb/PB_2131.c
+47
View File
@@ -0,0 +1,47 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 2,
.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
.is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
// Left SFP port (5)
// LED pin 9
.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
.sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
// Right SFP port (6)
// LED pin 24
.sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
.sfp_port[1].pin_los = GPIO51_I2C_SDA2_UART1_RX,
.sfp_port[1].pin_tx_disable = GPIO_NA,
.sfp_port[1].sds = 0,
.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA,
.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
.led_sets = {
{
// RJ45 Amber LED (left)
LEDS_2G5 | LEDS_LINK,
// RJ45 Green LED (Right)
LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
0,
0,
},
{
// SFP LED
LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT,
0, // unused
0, // unused
0
},
},
.led_mux_custom = 1,
.led_mux = {
0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x0f, 0x20, 0x0d, 0x0e, 0x10, 0x11, 0x12, 0x14, 0x15, 0x16, 0x18, 0x19, 0x1a, 0x1c, 0x1d, 0x1e, 0x0c, 0x21, 0x22, 0x23
},
};
machine/pcb/PB_2132.c
+38
View File
@@ -0,0 +1,38 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 1,
.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
.sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA,
.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
.led_sets = {
{
/* LED0 = RJ45: Amber LED: 2.5G */
LEDS_2G5 | LEDS_LINK | LEDS_ACT,
/* LED1 = RJ45: Green LED: 10M / 100M / 1000M */
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
0,
0
},
{
/* SFP+ single Green LED. */
LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT,
0,
0,
0
},
},
};
machine/pcb/PCB_310S_4T2XT_V1_0_0_22273.c
+34
View File
@@ -0,0 +1,34 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 0,
.n_10g = 2,
.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 0},
.reset_pin = GPIO48_I2C_SCL1,
.high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
.led_mux_custom = 1,
.led_mux = { 0x00, 0x01, 0x04, 0x05, 0x08, // 65e0
0x09, 0x0c, 0x3f, 0x0d, 0x10, // 65e4
0x11, 0x0e, 0x14, 0x11, 0x12, // 65e8
0x15, 0x15, 0x16, 0x18, 0x19, // 65ec
0x1a, 0x19, 0x1d, 0x1e, 0x1c, // 65f0
0x1d, 0x20, 0x21 },
.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
/* Ports 1-4: Green: 2.5GBit, Orange: 10/100/1000MBit
* Ports 5-6: Green: 10GBit, Orange: <= 5GBit
*/
.led_sets = { { LEDS_2G5 | LEDS_LINK | LEDS_ACT,
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
LEDS_DUPLEX,
LEDS_2G5 | LEDS_LINK | LEDS_ACT },
{
LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT,
LEDS_LINK | LEDS_ACT | LEDS_10G | LEDS_5G,
LEDS_2G5 | LEDS_LINK,
LEDS_COL | LEDS_DUPLEX
}
},
};
machine/pcb/PCB_310S_4T2XT_V1_0_0_22273_init.c
+8
View File
@@ -0,0 +1,8 @@
#include "machine_init_defs.h"
void machine_custom_init(void) __banked
{
// For this device, the reset value of RTL837X_PIN_MUX_0 is 0x30000000,
// which would disables all LEDS, enable them manually:
REG_SET(RTL837X_PIN_MUX_0, 0x30db68bf);
}
machine/pcb/PCB_AFGW_SWTG218ANS_V2_0_2_23308.c
+31
View File
@@ -0,0 +1,31 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.mac_flash_offset = 0x1FC000,
.n_sfp = 1,
.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
.sfp_port[0].pin_detect = GPIO38,
.sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO48_I2C_SCL1,
.high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
.led_mux = { 0x00, 0x01, 0x04, 0x05, 0x08, 0x09, 0x0c, 0x09, 0x0d, 0x10, 0x11, 0x0e, 0x14, 0x11, 0x12, 0x15, 0x15, 0x16, 0x18, 0x19, 0x1a, 0x19, 0x1d, 0x1e, 0x1c, 0x1d, 0x20, 0x21 },
.led_mux_custom = 1,
.led_sets = { { LEDS_2G5 | LEDS_LINK | LEDS_ACT,
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
LEDS_DUPLEX,
LEDS_2G5 | LEDS_LINK | LEDS_ACT
},
{ LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT,
LEDS_10G | LEDS_LINK | LEDS_ACT,
LEDS_2G5 | LEDS_LINK,
LEDS_COL | LEDS_DUPLEX
},
},
};
machine/pcb/PCB_AFGW_SWTG218ANS_V2_0_2_23308_init.c
+6
View File
@@ -0,0 +1,6 @@
#include "machine_init_defs.h"
void machine_custom_init(void) __banked
{
REG_SET(RTL837X_REG_LED_GLB_IO_EN, 0x7f24977f);
}
machine/pcb/PCB_K0402W_U13_V2_0.c
Symlink
+1
View File
@@ -0,0 +1 @@
PCB_K0402W_V2_0.c
machine/pcb/PCB_K0402W_V1_0.c
+54
View File
@@ -0,0 +1,54 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 2,
.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
.is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
/* Left SFP (logical 8, SDS1): GPIO30=ModAbs, GPIO37=RX_LOS */
.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
.sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
/* Right SFP (logical 3, SDS0): GPIO50=ModAbs, GPIO51=RX_LOS */
.sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
.sfp_port[1].pin_los = GPIO51_I2C_SDA2_UART1_RX,
.sfp_port[1].pin_tx_disable = GPIO_NA,
.sfp_port[1].sds = 0,
.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA,
/* These don't appear to be populated / wired-up; the power LED is always on */
.high_leds = { 0 },
/* Copper ports use SET0; SFP ports use SET1 */
.port_led_set = {0, 0, 0, 1, 0, 0, 0, 0, 1},
.led_sets = {
{ /* SET0: copper — LED0=amber (2.5G), LED2=green (1G/100M/10M) */
LEDS_2G5 | LEDS_LINK | LEDS_ACT,
0,
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
0
},
{ /* SET1: SFP — all speeds link/act */
LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
0,
0,
0
},
},
.led_mux_custom = 1,
.led_mux = {
0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, /* GPIO0-7: unused */
0x0f, 0x0c, 0x0d, 0x0e, 0x10, 0x11, 0x12, /* GPIO8-14 */
0x14, 0x15, 0x16, 0x18, 0x19, 0x1a, /* GPIO15-20 */
0x1c, 0x1d, 0x1e, 0x20, 0x21, 0x22, 0x23 /* GPIO21-27 */
},
};
machine/pcb/PCB_K0402W_V2_0.c
+52
View File
@@ -0,0 +1,52 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 2,
.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
.is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
/* Left SFP (logical 8, SDS1): GPIO30=ModAbs, GPIO37=RX_LOS */
.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
.sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
/* Right SFP (logical 3, SDS0): GPIO50=ModAbs, GPIO51=RX_LOS */
.sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
.sfp_port[1].pin_los = GPIO51_I2C_SDA2_UART1_RX,
.sfp_port[1].pin_tx_disable = GPIO_NA,
.sfp_port[1].sds = 0,
.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA,
.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
/* Copper ports use SET0; SFP ports use SET1 */
.port_led_set = {0, 0, 0, 1, 0, 0, 0, 0, 1},
.led_sets = {
{ /* SET0: copper — LED0=amber (2.5G), LED2=green (1G/100M/10M) */
LEDS_2G5 | LEDS_LINK | LEDS_ACT,
0,
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
0
},
{ /* SET1: SFP — all speeds link/act */
LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
0,
0, 0
},
},
.led_mux_custom = 1,
.led_mux = {
0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, /* GPIO0-7: unused */
0x0f, 0x0c, 0x0d, 0x0e, 0x10, 0x11, 0x12, /* GPIO8-14 */
0x14, 0x15, 0x16, 0x18, 0x19, 0x1a, /* GPIO15-20 */
0x1c, 0x1d, 0x1e, 0x20, 0x21, 0x22, 0x23 /* GPIO21-27 */
},
};
machine/pcb/PCB_K0402W_V3_0.c
+43
View File
@@ -0,0 +1,43 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 2,
.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
.is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
// Left SFP port
.sfp_port[0].pin_detect = GPIO38,
.sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
// Right SFP port
.sfp_port[1].pin_detect = GPIO37,
.sfp_port[1].pin_los = GPIO_NA,
.sfp_port[1].sds = 0,
.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO30_ACL_BIT3_EN,
.high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
.led_sets = {
{
LEDS_2G5 | LEDS_LINK | LEDS_10M | LEDS_ACT,
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
LEDS_1G | LEDS_LINK,
0
},
{
LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK,
LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_ACT,
0,
0
},
},
.led_mux_custom = 1,
.led_mux = {
0x00,0x01,0x04,0x05,0x08,0x09,0x0c,0x3f,0x0d,0x10,0x11,0x0e,0x14,0x11,0x12,0x15,0x15,0x16,0x18,0x19,0x1a,0x19,0x1d,0x1e,0x1c,0x1d,0x20,0x21
},
};
machine/pcb/PCB_K0501W_V2_0.c
+31
View File
@@ -0,0 +1,31 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 1,
.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
.sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA,
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
.led_sets = {
{
LEDS_2G5 | LEDS_LINK | LEDS_ACT,
0,
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
0
},
{
LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
0,
0,
0
},
},
};
machine/pcb/PCB_K0801W_V2_0.c
+42
View File
@@ -0,0 +1,42 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 1,
.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
.sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA,
.high_leds = {
.mux = LED_27 | LED_29,
.enable = LED_28_SYS | LED_29
},
/* Ports 1-8 use set 0, port 9 SFP uses set 1 */
.port_led_set = {0, 0, 0, 0, 0, 0, 0, 0, 1},
.led_sets = {
{ /* Set 0: RJ45 copper ports
* Amber = 2.5G
* Green = 1G/100M/10M with activity
*/
LEDS_2G5 | LEDS_LINK | LEDS_ACT, /* Amber */
0,
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, /* Green */
0
},
{ /* Set 1: SFP port, single green LED for all valid speeds */
LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
0,
0,
0
},
},
};
machine/pcb/PCB_SL310S_4T1T1X_V1_0_1_24107.c
+40
View File
@@ -0,0 +1,40 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 1,
.n_10g = 1,
.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
.sfp_port[0].pin_detect = GPIO38,
.sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO48_I2C_SCL1,
.high_leds = { .mux = LED_28_SYS, .enable = LED_27 | LED_28_SYS | LED_29 },
.led_mux_custom = 1,
.led_mux = { 0x00, 0x01, 0x04, 0x05, 0x08, // 65e0
0x09, 0x0c, 0x3f, 0x0d, 0x10, // 65e4
0x11, 0x0e, 0x14, 0x11, 0x12, // 65e8
0x15, 0x15, 0x16, 0x18, 0x19, // 65ec
0x1a, 0x19, 0x1d, 0x1e, 0x1c, // 65f0
0x1d, 0x20, 0x21 },
.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
/* Ports 1-4: Orange: 2.5GBit, Green: 10/100/1000MBit
* Port 5: Blue: 10GBit, Green: 10Mbit-5GBit
* SFP-port: Blue: 10GBit, Green 100MBit-5GBit
*/
.led_sets = { { LEDS_2G5 | LEDS_LINK | LEDS_ACT,
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
LEDS_DUPLEX,
LEDS_2G5 | LEDS_LINK | LEDS_ACT },
{
LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT | LEDS_5G,
LEDS_LINK | LEDS_ACT | LEDS_10G,
LEDS_2G5 | LEDS_LINK,
LEDS_COL | LEDS_DUPLEX
}
},
};
machine/pcb/PCB_SWTG018AS_A_V2_0_1_19649.c
+37
View File
@@ -0,0 +1,37 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.mac_flash_offset = 0x1FC000,
.n_sfp = 1,
.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
.sfp_port[0].pin_detect = GPIO38,
.sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO48_I2C_SCL1,
.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
.led_sets = {
{ /* RJ45: First LED, yellow, second LED: green */
LEDS_2G5 | LEDS_LINK,
LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
0,
0,
}, { /* SFP PORT, SINGLE GREEN LED */
LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
0,
0,
0,
}},
.led_mux_custom = 1,
.led_mux = { 0x00, 0x01, 0x04, 0x05, 0x08, // 65e0
0x09, 0x0c, 0x09, 0x0d, 0x10, // 65e4
0x11, 0x0e, 0x14, 0x11, 0x12, // 65e8
0x15, 0x15, 0x16, 0x18, 0x19, // 65ec
0x1a, 0x19, 0x1d, 0x1e, 0x1c, // 65f0
0x1d, 0x20, 0x21 },
};
machine/pcb/PCB_SWTG018AS_V2_1_0.c
+39
View File
@@ -0,0 +1,39 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.mac_flash_offset = 0x1FC000,
.n_sfp = 1,
.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
.sfp_port[0].pin_detect = GPIO38, // pulled low on module insert
.sfp_port[0].pin_los = GPIO_NA, // no LOS pin wired
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO54_ACL_BIT2_EN,
.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
// LED wiring matches the SWTG018AS-A V2.0 (same PCB family)
.led_sets = {
{ /* RJ45: First LED, yellow, second LED: green */
LEDS_2G5 | LEDS_LINK,
LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
0,
0,
}, { /* SFP set (superseded by the raw register override in machine_custom_init) */
LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
0,
0,
0,
}},
.led_mux_custom = 1,
.led_mux = { 0x00, 0x01, 0x04, 0x05, 0x08, // 65e0
0x09, 0x0c, 0x09, 0x0d, 0x10, // 65e4
0x11, 0x0e, 0x14, 0x11, 0x12, // 65e8
0x15, 0x15, 0x16, 0x18, 0x19, // 65ec
0x1a, 0x19, 0x1d, 0x1e, 0x1c, // 65f0
0x1d, 0x20, 0x21 },
};
machine/pcb/PCB_SWTG018AS_V2_1_0_init.c
+18
View File
@@ -0,0 +1,18 @@
#include "machine_init_defs.h"
static __code const struct { uint16_t reg; uint32_t val; } custom_init_regs[] = {
{ RTL837X_REG_LED3_0_SET1, 0x00100000UL },
{ RTL837X_REG_LED1_0_SET1, 0x01400155UL },
{ RTL837X_REG_LED1_0_SET0, 0x01740141UL },
{ RTL837X_REG_LED_GLB_IO_EN, 0x7f24977fUL },
{ RTL837X_PIN_MUX_0, 0x20db6880UL },
};
void machine_custom_init(void) __banked
{
uint8_t i;
// REG_SET is a multi-statement macro without a do-while wrapper: braces required
for (i = 0; i < sizeof(custom_init_regs) / sizeof(custom_init_regs[0]); i++) {
REG_SET(custom_init_regs[i].reg, custom_init_regs[i].val);
}
}
machine/pcb/PCB_SWTG024AS_A_V2_0_1_19650.c
+46
View File
@@ -0,0 +1,46 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.mac_flash_offset = 0x1FC000,
.n_sfp = 2,
.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
.is_sfp = {0, 0, 0, 1, 0, 0, 0, 0, 2},
// SFP port on SDS0 / logical port 3
.sfp_port[0].pin_detect = GPIO37,
.sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 0,
.sfp_port[0].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
// SFP port on SDS1 / logical port 8
.sfp_port[1].pin_detect = GPIO38,
.sfp_port[1].pin_los = GPIO_NA,
.sfp_port[1].pin_tx_disable = GPIO_NA,
.sfp_port[1].sds = 1,
.sfp_port[1].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO48_I2C_SCL1,
.high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
.led_sets = {
{
LEDS_2G5 | LEDS_LINK | LEDS_ACT,
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
LEDS_DUPLEX,
LEDS_2G5 | LEDS_LINK | LEDS_ACT
},
{
LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT,
LEDS_10G | LEDS_LINK | LEDS_ACT,
LEDS_2G5 | LEDS_LINK,
LEDS_COL | LEDS_DUPLEX
},
},
.led_mux_custom = 1,
.led_mux = {
0x00,0x01,0x04,0x05,0x08,0x09,0x0c,0x3f,0x0d,0x10,0x11,0x0e,0x14,0x11,0x12,0x15,0x15,0x16,0x18,0x19,0x1a,0x19,0x1d,0x1e,0x1c,0x1d,0x20,0x21
},
};
machine/pcb/PCB_SWTG024AS_A_V2_0_1_19650_HORACO.c
+40
View File
@@ -0,0 +1,40 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 1,
.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
.sfp_port[0].pin_detect = GPIO38,
.sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA,
.high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
/* Ports 1-5 RJ45 use set 0, port 9 SFP uses set 1
* Ports 1-5: Green: 2.5GBit, Amber: 10/100/1000MBit
* SFP-port: Blue: 10GBit, Green: 100MBit-2.5GBit
*/
.led_sets = {
{
LEDS_2G5 | LEDS_LINK | LEDS_ACT,
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
LEDS_DUPLEX,
LEDS_2G5 | LEDS_LINK | LEDS_ACT
},
{
LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT,
LEDS_10G | LEDS_LINK | LEDS_ACT,
LEDS_2G5 | LEDS_LINK,
LEDS_COL | LEDS_DUPLEX
},
},
.led_mux_custom = 1,
.led_mux = {
0x00,0x01,0x04,0x05,0x08,0x09,0x0c,0x3f,0x0d,0x10,0x11,0x0e,0x14,0x11,0x12,0x15,0x15,0x16,0x18,0x19,0x1a,0x19,0x1d,0x1e,0x1c,0x1d,0x20,0x21
},
};
machine/pcb/PCB_SWTG024AS_A_V2_0_1_19650_init.c
+9
View File
@@ -0,0 +1,9 @@
#include "machine_init_defs.h"
void machine_custom_init(void) __banked
{
reg_bit_set(RTL837X_REG_LED_GLB_IO_EN, 6);
reg_bit_set(RTL837X_REG_LED_MODE, 17);
reg_bit_clear(RTL837X_REG_LED_MODE, 9);
reg_bit_clear(RTL837X_REG_LED_MODE, 7);
}
machine/pcb/PCB_SWTG024AS_V2_0_16895.c
+40
View File
@@ -0,0 +1,40 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 1,
.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
.sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA,
.high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
/* Ports 1-5 RJ45 use set 0, port 9 SFP uses set 1
* Ports 1-5: Green: 2.5GBit, Amber: 10/100/1000MBit
* SFP-port: Blue: 10GBit, Amber: 100MBit-2.5GBit
*/
.led_sets = {
{
LEDS_2G5 | LEDS_LINK | LEDS_ACT,
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
LEDS_DUPLEX,
LEDS_2G5 | LEDS_LINK | LEDS_ACT
},
{
LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT,
LEDS_10G | LEDS_LINK | LEDS_ACT,
LEDS_2G5 | LEDS_LINK,
LEDS_COL | LEDS_DUPLEX
},
},
.led_mux_custom = 1,
.led_mux = {
0x00,0x01,0x04,0x05,0x08,0x09,0x0c,0x3f,0x0d,0x10,0x11,0x0e,0x14,0x11,0x12,0x15,0x15,0x16,0x18,0x19,0x1a,0x19,0x1d,0x1e,0x1c,0x1d,0x20,0x21
},
};
machine/pcb/PCB_SWTG024AS_V2_0_16895_init.c
+20
View File
@@ -0,0 +1,20 @@
#include "machine_init_defs.h"
void machine_custom_init(void) __banked
{
uint16_t pval;
reg_bit_set(RTL837X_REG_LED_GLB_IO_EN, 6);
reg_bit_set(RTL837X_REG_LED_MODE, 17);
reg_bit_clear(RTL837X_REG_LED_MODE, 9);
reg_bit_clear(RTL837X_REG_LED_MODE, 7);
// OEM firmware sets these companion SDS0 polarity bits for the RTL8221B.
sds_read(0, 0, 0);
pval = SFR_DATA_U16;
sds_write_v(0, 0, 0, pval | 0x100);
sds_read(0, 6, 2);
pval = SFR_DATA_U16;
sds_write_v(0, 6, 2, pval | 0x4000);
}
machine/pcb/PCB_SWTG024AS_V2_0_17452.c
+38
View File
@@ -0,0 +1,38 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 2,
.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
.is_sfp= {0, 0, 0, 2, 0, 0, 0, 0, 1},
// Left SFP port (J4)
.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
.sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ), /* GPIO 39 */
// Right SFP port (J2)
.sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
.sfp_port[1].pin_los = GPIO51_I2C_SDA2_UART1_RX,
.sfp_port[1].pin_tx_disable = GPIO_NA,
.sfp_port[1].sds = 0,
.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ), /* GPIO 40 */
.reset_pin = GPIO_NA,
.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
.led_sets = {
{ /* RJ45: Green LED */
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
0,
/* Amber LED */
LEDS_2G5 | LEDS_LINK | LEDS_ACT,
0
}, { /* SFP PORT: SINGLE GREEN LED */
LEDS_10M | LEDS_100M | LEDS_1G | LEDS_2G5 | LEDS_10G | LEDS_LINK | LEDS_ACT,
0,
0,
0,
},
},
};
machine/pcb/PCB_SWTG024AS_V2_0_17452_XIKESTOR.c
+39
View File
@@ -0,0 +1,39 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 2,
.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
.is_sfp= {0, 0, 0, 2, 0, 0, 0, 0, 1},
// Left SFP port (J4)
.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
.sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ), /* GPIO 39 */
// Right SFP port (J2)
.sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
.sfp_port[1].pin_los = GPIO_NA,
.sfp_port[1].pin_tx_disable = GPIO_NA,
.sfp_port[1].sds = 0,
.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ), /* GPIO 40 */
.reset_pin = GPIO54_ACL_BIT2_EN,
.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
.led_sets = {
{ /* RJ45: Green LED */
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
0,
/* Amber LED */
LEDS_2G5 | LEDS_LINK | LEDS_ACT,
0
}, { /* SFP PORT: SINGLE GREEN LED */
LEDS_10M | LEDS_100M | LEDS_1G | LEDS_2G5 | LEDS_10G | LEDS_LINK | LEDS_ACT,
0,
0,
0,
},
},
.mac_flash_offset = 0x1FC000,
};
machine/pcb/PCB_SWTG024AS_V2_1_0_19023.c
+54
View File
@@ -0,0 +1,54 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 2,
.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
.is_sfp = {0, 0, 0, 1, 0, 0, 0, 0, 2},
// SFP port on SDS0 / logical port 3
.sfp_port[0].pin_detect = GPIO37,
.sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 0,
.sfp_port[0].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
// SFP port on SDS1 / logical port 8
.sfp_port[1].pin_detect = GPIO38,
.sfp_port[1].pin_los = GPIO_NA,
.sfp_port[1].pin_tx_disable = GPIO_NA,
.sfp_port[1].sds = 1,
.sfp_port[1].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA,
.high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1 },
.led_sets = {
{
LEDS_2G5 | LEDS_LINK | LEDS_ACT,
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
0,
0
},
{
LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT,
LEDS_10G | LEDS_LINK | LEDS_ACT,
0,
0
},
},
.led_mux_custom = 1,
.led_mux = {
0x00, 0x01, 0x04, 0x05, 0x08,
0x09, 0x0c, 0x3f, 0x0d, 0x10,
0x11, 0x3f, 0x14, 0x3f, 0x3f,
0x15, 0x3f, 0x3f, 0x18, 0x3f,
0x3f, 0x19, 0x3f, 0x3f, 0x1c,
0x1d, 0x20, 0x21
},
};
// Boot 1-4G 6Y
// 1-4Y 5G 6Y
machine/pcb/PCB_SWTG024AS_V2_1_0_19023_init.c
+22
View File
@@ -0,0 +1,22 @@
#include "machine_init_defs.h"
void machine_custom_init(void) __banked
{
// Stock LED_MODE: [8:5]=1, [12:9]=2 (leds_setup hard-codes 5/3); same as clearing bits 7 and 9
reg_bit_set(RTL837X_REG_LED_MODE, 17);
reg_bit_clear(RTL837X_REG_LED_MODE, 9);
reg_bit_clear(RTL837X_REG_LED_MODE, 7);
// Stock LED_GLB_IO_EN [27:0] = 0x0f249740: enable LED pins 6, 8, 9, 10, 12, 15, 18, 21, 24-27
reg_bit_set(RTL837X_REG_LED_GLB_IO_EN, 6);
reg_bit_set(RTL837X_REG_LED_GLB_IO_EN, 8);
reg_bit_set(RTL837X_REG_LED_GLB_IO_EN, 9);
reg_bit_set(RTL837X_REG_LED_GLB_IO_EN, 10);
reg_bit_set(RTL837X_REG_LED_GLB_IO_EN, 12);
reg_bit_set(RTL837X_REG_LED_GLB_IO_EN, 15);
reg_bit_set(RTL837X_REG_LED_GLB_IO_EN, 18);
reg_bit_set(RTL837X_REG_LED_GLB_IO_EN, 21);
reg_bit_set(RTL837X_REG_LED_GLB_IO_EN, 24);
reg_bit_set(RTL837X_REG_LED_GLB_IO_EN, 25);
reg_bit_set(RTL837X_REG_LED_GLB_IO_EN, 26);
}
machine/pcb/PCB_SWTG115AS_V2_0_16030.c
+30
View File
@@ -0,0 +1,30 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.mac_flash_offset = 0x1FC000,
.n_sfp = 1,
.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
.sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO54_ACL_BIT2_EN,
.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
.led_sets = { { LEDS_2G5 | LEDS_LINK | LEDS_ACT, // Green LED (right)
0, // unused
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, // Amber LED (left)
0
}, // unused
{ LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT, // SFP LED
0, // unused
0, // unused
0
}, // unused },
},
.led_mux_custom = 0,
};
machine/pcb/PCB_SWTG115AS_V2_1_17443.c
Symlink
+1
View File
@@ -0,0 +1 @@
PCB_SWTG115AS_V2_0_16030.c
machine/pcb/PCB_SWTG118AS_V2_0_16029.c
+30
View File
@@ -0,0 +1,30 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.mac_flash_offset = 0x1FC000,
.n_sfp = 1,
.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
.sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO54_ACL_BIT2_EN,
.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
.led_sets = { { LEDS_2G5 | LEDS_LINK | LEDS_ACT, // Green LED (right)
0, // unused
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, // Amber LED (left)
0
}, // unused
{ LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT, // SFP LED
0, // unused
0, // unused
0
}, // unused },
},
};
machine/pcb/PCB_SWTG118AS_V2_1_17462.c
Symlink
+1
View File
@@ -0,0 +1 @@
PCB_SWTG118AS_V2_0_16029.c
machine/pcb/S1100P_8GT_1SX_73N_S_V1_01.c
+37
View File
@@ -0,0 +1,37 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.mac_flash_offset = 0x1FC000,
.n_sfp = 1,
.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
.sfp_port[0].pin_detect = GPIO38,
.sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO54_ACL_BIT2_EN,
.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = {0, 0, 0, 0, 0, 0, 0, 0, 1},
.led_sets = {
{
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, // LED0: orange
0,
LEDS_2G5 | LEDS_LINK | LEDS_ACT, // LED2: green
0
},
{
LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT, // SFP LED0: green (both SFP LEDs are green)
0, 0, 0
}
},
.led_mux_custom = 1,
.led_mux = {
0x00, 0x02, 0x04, 0x06, 0x08, 0x0a, 0x0c, 0x09,
0x0e, 0x10, 0x12, 0x0e, 0x14, 0x11, 0x12, 0x16,
0x15, 0x16, 0x18, 0x19, 0x1a, 0x1a, 0x1d, 0x1e,
0x1c, 0x1e, 0x20, 0x21
},
};
machine/pcb/S1100W_8GT_1SX_SE_V1_05.c
Symlink
+1
View File
@@ -0,0 +1 @@
PCB_SWTG118AS_V2_0_16029.c
machine/pcb/S25G1109FP_V1_3.c
+53
View File
@@ -0,0 +1,53 @@
#include "machine_defs.h"
// Sirivision S25G1109FP V1.3 (label: SR-S25G2109F): 8x2.5G RJ45 + 1x10G SFP+,
// 2 MB flash, RTL8373 (non-N) + RTL8224. Derived from the KP-9000-9XHML-X V3.1
// definition; every value below was confirmed on hardware, see the device doc
// in doc/devices/S25G1109FP_V1_3.md.
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.n_sfp = 1,
.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
/* ModAbs is GPIO30 (low with a module inserted, high with an empty cage),
* LOS is GPIO37 (high without light). GPIO38, the ModAbs pin of the
* KP-9000 8+1 reference, is tied low here and never changes, which made the
* firmware believe a module was always present. */
.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
.sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
/* Reset button: GPIO54 reads high when idle and low while pressed.
* GPIO48, used by the KP-9000 reference, never changes on this board. */
.reset_pin = GPIO54_ACL_BIT2_EN,
.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
.led_sets = {
{ /* RJ45: left LED = link/activity, right LED = 2.5G */
LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
/* speed-only conditions leave the LED dark: the LINK bit has to be
* set as well, otherwise the LED controller stays off */
LEDS_2G5 | LEDS_LINK,
0,
0,
}, { /* SFP PORT, SINGLE GREEN LED */
LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
0,
0,
0,
}},
/* 6 bits per LED pin, encoded as (port << 2) | led. This is the chip
* default for port-ordered wiring (pin 3n+m = port n+1, function m) with
* one change: pin 25 drives the SFP LED with function 0, the only function
* populated in led_sets[1]. See the device doc for the details. */
.led_mux_custom = 1,
.led_mux = {0x00, 0x01, 0x02, 0x04, 0x05, 0x06, 0x08, 0x09, 0x0a, 0x0c,
0x0d, 0x0e, 0x10, 0x11, 0x12, 0x14, 0x15, 0x16, 0x18, 0x19,
0x1a, 0x1c, 0x1d, 0x1e, 0x20, 0x20, 0x22, 0x23},
/* Factory MAC at flash 0x1FC000, verified in the stock dump. The stock
* value is a locally administered address, which is rejected, so a
* UUID-derived MAC is used unless a valid one is stored here. */
.mac_flash_offset = 0x1FC000,
};
machine/pcb/S25G2206FP_V1_1.c
+39
View File
@@ -0,0 +1,39 @@
#include "machine_defs.h"
__code const struct machine machine = {
MACHINE_COMMON_SETTING,
.mac_flash_offset = 0x1FC000,
.n_sfp = 2,
.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
.is_sfp= {0, 0, 0, 2, 0, 0, 0, 0, 1},
// Left SFP port (J4)
.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
.sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ), /* GPIO 39 */
// Right SFP port (J2)
.sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
.sfp_port[1].pin_los = GPIO51_I2C_SDA2_UART1_RX,
.sfp_port[1].pin_tx_disable = GPIO_NA,
.sfp_port[1].sds = 0,
.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ), /* GPIO 40 */
.reset_pin = GPIO36_PWM_OUT,
.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
.led_sets = {
{ /* RJ45: Green LED */
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
0,
/* Amber LED */
LEDS_2G5 | LEDS_LINK | LEDS_ACT,
0
}, { /* SFP PORT: SINGLE GREEN LED */
LEDS_10M | LEDS_100M | LEDS_1G | LEDS_2G5 | LEDS_10G | LEDS_LINK | LEDS_ACT,
0,
0,
0,
},
},
};