Merge upstream main into CPU VLAN fix

.github/workflows/build.yml

@@ -5,6 +5,11 @@ on:
     branches: ['**']
   pull_request:
 
+permissions:
+  contents: read
+  pull-requests: write
+  issues: write
+
 jobs:
   build:
     runs-on: ubuntu-latest
@@ -13,18 +18,33 @@ jobs:
 
     steps:
       - uses: actions/checkout@v6
+        with:
+          path: branch
+
+      - uses: actions/checkout@v6
+        with:
+          path: main
+          ref: main
 
       - name: Install dependencies
         run: |
           apt update
           apt install make gcc sdcc xxd python-is-python3 libjson-c-dev zlib1g-dev -y
       - name: Run the host-side unit tests
-        run: make -C test
+        run: cd branch && make -C test
       - name: Check that every machine definition can be compiled
-        run: make machine_check
+        run: cd branch && make machine_check
       - name: Make project (4x2/RTL8372)
-        run: make CI=1 MACHINE="KP_9000_6XHML_X2"
+        run: cd branch && make CI=1 MACHINE="KP_9000_6XHML_X2" && cp output/KP_9000_6XHML_X2/rtlplayground.map /tmp/branch.map
       - name: Make project (8x1/RTL8373)
-        run: make CI=1 MACHINE="KP_9000_9XHML_X_V3_1"
+        run: cd branch && make CI=1 MACHINE="KP_9000_9XHML_X_V3_1"
       - name: Make project with the health instrumentation
-        run: make clean && make CI=1 MACHINE="KP_9000_6XHML_X2" HEALTH=1
+        run: cd branch && make clean && make CI=1 MACHINE="KP_9000_6XHML_X2" HEALTH=1
+      - name: Make main
+        run: cd main && make CI=1 MACHINE="KP_9000_6XHML_X2" && cp output/KP_9000_6XHML_X2/rtlplayground.map /tmp/main.map
+      - name: Calculate bank growth
+        run: |
+          sed -rn 's/^([XCD]SEG|(BANK[0-9])).*=\s+([0-9]+)\. bytes.*$/MAIN_\1=\3/p' /tmp/main.map | sort -u >> "$GITHUB_ENV"
+          sed -rn 's/^([XCD]SEG|(BANK[0-9])).*=\s+([0-9]+)\. bytes.*$/BRANCH_\1=\3/p' /tmp/branch.map | sort -u >> "$GITHUB_ENV"
+          du -sb main/output/KP_9000_6XHML_X2/html_min | awk '{print "MAIN_WEB="$1}' >> "$GITHUB_ENV"
+          du -sb branch/output/KP_9000_6XHML_X2/html_min | awk '{print "BRANCH_WEB="$1}' >>"$GITHUB_ENV"

.gitignore

@@ -1,13 +1,16 @@
 .gitignore
 .idea/
 output/
+output-main/
 html_data.c
 html_data.h
 version.h
 tools/httpd_sim
 tools/injector
 tools/fileadder
+build/
 
 # host-test stand-ins for the two generated headers
 !test/stub/html_data.h
 !test/stub/version.h
+.vscode

CHANGELOG.md

@@ -25,6 +25,22 @@
 
 ## Fixed
 
+- Time
+  - `rtl8372_init()` sets SDS 0 to SGMII as the stock firmware does. The masks were 0, so on RTL8372
+    boards without 10G ports both SerDes stayed off, and with SDS 0 off `RTL837X_REG_SEC_COUNTER`
+    does not hold a written value: NTP never retried after a failed first attempt at boot and
+    froze the clock after a sync.
+
+- Web UI
+  - Firefox no longer fills a saved login into the new admin password fields. It also put the
+    user name into the NTP poll interval, which marked the Time card as edited, so it kept its
+    defaults (NTP off, no server, UTC-12:00) instead of the switch's settings.
+  - Accept firmware uploads regardless of the file part's MIME type, including
+    `application/macbinary` sent by Chrome on macOS for `.bin` files.
+
+- Health
+  - `HEALTH=1` builds no longer write past the phase timing arrays at the LLDP checkpoint, which
+    corrupted the `link` slow counter and the DHCP client state. #658
 - Config
   - A startup configuration line longer than the command buffer no longer stops the replay:
     the offending line is skipped and the following lines are still applied.

Makefile

@@ -15,11 +15,10 @@ SUBDIRS := tools
 SUBDIRSCLEAN=$(addsuffix clean,$(SUBDIRS))
 
 # $MACHINE selects machine/$(MACHINE).c as the board definition and is passed
-# on as -DMACHINE_$(MACHINE), which the rest of the firmware tests with
+# on as -DMACHINE_NAME, which machine.h uses to include machine/$(MACHINE).h.
-# #if defined(MACHINE_...), and as -DMACHINE_NAME, which machine.h uses to
+# Board selection itself needs no MACHINE_* symbol for #if chains, so the
-# include machine/$(MACHINE).h. Both take the same value, so they cannot drift.
+# definition is all the compiler has to know.
 ifneq ($(MACHINE),)
-	CC_FLAGS += -DMACHINE_$(MACHINE)
 	CC_FLAGS += -DMACHINE_NAME=$(MACHINE)
 endif
 # Health instrumentation and the "health" console command: HEALTH=1 gmake ...
@@ -34,7 +33,16 @@ endif
 # The board definition being built: one file per MACHINE_* symbol in machine.h.
 MACHINE_SRC = machine/$(MACHINE).c
 
-BUILDDIR = output/$(MACHINE)
+MACHINE_INIT_DEFAULT := machine/default_machine_init.c
+MACHINE_INIT_SRC := $(wildcard machine/$(MACHINE)_init.c)
+ifeq ($(MACHINE_INIT_SRC),)
+	MACHINE_INIT_SRC := $(MACHINE_INIT_DEFAULT)
+endif
+
+ifndef BUILDDIR
+	BUILDDIR = output/$(MACHINE)
+endif
+
 VERSION_HEADER := version.h
 
 GIT_VERSION := $(shell git rev-parse --short HEAD)
@@ -61,6 +69,9 @@ endif
 # is built, including the tools/ subdirectory.
 all: create_build_dir $(VERSION_HEADER) $(MACHINE_SRC) $(SUBDIRS) $(BUILDDIR)/rtlplayground-$(FILENAME_EXTENSION).bin
 
+bank_size:
+	tools/bank_occupancy.sh "$(MACHINE)"
+
 create_build_dir:
 	mkdir -p "$(BUILDDIR)"
 	mkdir -p "$(BUILDDIR)/uip"
@@ -81,7 +92,7 @@ $(MACHINE_SRC):
 # invalid $MACHINE value
 SRCS = \
 	$(MACHINE_SRC) \
-	machine_init.c \
+	$(MACHINE_INIT_SRC) \
 	cmd_editor.c \
 	cmd_parser.c \
 	dhcp.c \
@@ -133,7 +144,7 @@ HTML := $(shell find html -name '*.js' -or -name '*.html' -or -name '*.svg' -or
 # Minified copy of the web UI sources, used as the fileadder input.
 # The raw html/ sources stay untouched for development; the minified
 # copy is a build artifact under output/.
-HTML_MIN := output/html_min
+HTML_MIN := $(BUILDDIR)/html_min
 .PHONY: html_min
 html_min: $(HTML)
 	rm -rf $(HTML_MIN)
@@ -141,7 +152,7 @@ html_min: $(HTML)
 	@for f in $(HTML); do python3 tools/minify.py $$f $(HTML_MIN)/$$(basename $$f) || exit 1; done
 
 html_data.c html_data.h &: $(HTML) | tools html_min
-	tools/output/fileadder -a $(HTML_LOCATION) -s $(IMAGESIZE) -b BANK1 -z -d $(HTML_MIN) -p html_data
+	tools/$(BUILDDIR)/fileadder -a $(HTML_LOCATION) -s $(IMAGESIZE) -b BANK1 -z -d $(HTML_MIN) -p html_data
 
 $(VERSION_HEADER): FORCE
 	@printf '%s\n' "#ifndef VERSION_H" "#define VERSION_H" \
@@ -155,7 +166,7 @@ $(VERSION_HEADER): FORCE
 httpd: html_data.h
 
 $(SUBDIRS):
-	$(MAKE) -C $@
+	$(MAKE) -C $@ BUILDDIR=$(BUILDDIR)
 
 clean: $(SUBDIRSCLEAN)
 	-rm -f html_data.c html_data.h $(VERSION_HEADER)
@@ -193,31 +204,35 @@ $(BUILDDIR)/rtlplayground.img: $(BUILDDIR)/rtlplayground.ihx
 
 $(BUILDDIR)/rtlplayground-$(FILENAME_EXTENSION).bin: $(BUILDDIR)/rtlplayground.img | tools
 	if [ -e $@ ]; then rm $@; fi
-	tools/output/imagebuilder -i $^ $@
+	tools/$(BUILDDIR)/imagebuilder -i $^ $@
-	tools/output/fileadder -a $(DEFAULT_CONFIG_LOCATION) -s $(IMAGESIZE) -d config.txt $@
+	tools/$(BUILDDIR)/fileadder -a $(DEFAULT_CONFIG_LOCATION) -s $(IMAGESIZE) -d config.txt $@
-	tools/output/fileadder -a $(CONFIG_LOCATION) -s $(IMAGESIZE) -d config.txt $@
+	tools/$(BUILDDIR)/fileadder -a $(CONFIG_LOCATION) -s $(IMAGESIZE) -d config.txt $@
-	tools/output/fileadder -a $(HTML_LOCATION) -s $(IMAGESIZE) -z -d $(HTML_MIN) -b BANK1 $@
+	tools/$(BUILDDIR)/fileadder -a $(HTML_LOCATION) -s $(IMAGESIZE) -z -d $(HTML_MIN) -b BANK1 $@
-	tools/output/crc_calculator -u $@
+	tools/$(BUILDDIR)/crc_calculator -u $@
-	ln -sf $(MACHINE)/rtlplayground-$(FILENAME_EXTENSION).bin output/rtlplayground.bin
+	ln -sf $(MACHINE)/rtlplayground-$(FILENAME_EXTENSION).bin $(BUILDDIR)/../rtlplayground.bin
 
 .PHONY: clean distclean all $(SUBDIRS) $(SUBDIRSCLEAN) create_build_dir
 
 # Every machine/ definition is compiled, so a machine added to machine/ is
-# covered without registering it anywhere. The machine-specific defines are
+# covered without registering it anywhere. The _init.c files are excluded here:
+# they are the boot hooks, compiled separately below (the board's own if it
+# exists, otherwise default_machine_init.c). The machine-specific defines are
 # filtered out of $(CC_FLAGS) and supplied per iteration instead, so this also
 # works as "make machine_check MACHINE=...".
-MACHINE_DEFS := $(sort $(patsubst machine/%.c,%,$(wildcard machine/*.c)))
+MACHINE_DEFS := $(sort $(patsubst machine/%.c,%,$(filter-out machine/%_init.c,$(wildcard machine/*.c))))
 MACHINE_LESS_CC_FLAGS = $(filter-out -DMACHINE_%,$(CC_FLAGS))
 
-.PHONY:
+.PHONY: machine_check
 machine_check:
 	@mkdir -p $(BUILDDIR)/tmp
 	@set -eo pipefail; \
 	for MACHINE in $(MACHINE_DEFS); \
 	do \
 	echo "Checking $${MACHINE}"; \
-	$(CC) $(MACHINE_LESS_CC_FLAGS) -DMACHINE_$${MACHINE} -DMACHINE_NAME=$${MACHINE} -MMD -o $(BUILDDIR)/tmp/machine_check -c machine/$${MACHINE}.c; \
+	$(CC) $(MACHINE_LESS_CC_FLAGS) -DMACHINE_NAME=$${MACHINE} -MMD -o $(BUILDDIR)/tmp/machine_check -c machine/$${MACHINE}.c; \
-	$(CC) $(MACHINE_LESS_CC_FLAGS) -DMACHINE_$${MACHINE} -DMACHINE_NAME=$${MACHINE} -MMD -o $(BUILDDIR)/tmp/machine_check -c machine_init.c; \
+	INIT=machine/$${MACHINE}_init.c; \
+	if [ ! -e $$INIT ] && [ ! -L $$INIT ]; then INIT=$(MACHINE_INIT_DEFAULT); fi; \
+	$(CC) $(MACHINE_LESS_CC_FLAGS) -DMACHINE_NAME=$${MACHINE} -MMD -o $(BUILDDIR)/tmp/machine_check -c $$INIT; \
 	done
 	@rm -rf $(BUILDDIR)/tmp
 

boot.c

@@ -125,18 +125,6 @@ void early_boot_handle_button(void) __banked
 void sds_config(uint8_t sds, uint8_t mode) __banked
 {
 	print_string("sds_config sds: "); print_byte(sds); print_string(", mode: "); print_byte(mode); write_char('\n');
-	sds_config_mac(sds, mode);
-
-	if (mode == SDS_10GR || mode == SDS_QXGMII)
-		sds_write_v(sds, 0x21, 0x10, 0x4480); // Q002110:6480
-	else
-		sds_write_v(sds, 0x21, 0x10, 0x6480); // Q002110:6480
-	sds_write_v(sds, 0x21, 0x13, 0x0400); // Q002113:0400
-	sds_write_v(sds, 0x21, 0x18, 0x6d02); // Q002118:6d02
-	sds_write_v(sds, 0x21, 0x1b, 0x424e); // Q00211b:424e
-	sds_write_v(sds, 0x21, 0x1d, 0x0002); // Q00211d:0002
-	sds_write_v(sds, 0x36, 0x1c, 0x1390); // Q00361c:1390
-	sds_write_v(sds, 0x36, 0x14, 0x003f); // Q003614:003f
 
 	uint8_t page = 0;
 	uint16_t v = 0;
@@ -165,6 +153,21 @@ void sds_config(uint8_t sds, uint8_t mode) __banked
 		print_string("Error in SDS Mode\n");
 		return;
 	}
+
+	sds_config_mac(sds, mode);
+
+	if (mode == SDS_10GR || mode == SDS_QXGMII)
+		sds_write_v(sds, 0x21, 0x10, 0x4480); // Q002110:6480
+	else
+		sds_write_v(sds, 0x21, 0x10, 0x6480); // Q002110:6480
+
+	sds_write_v(sds, 0x21, 0x13, 0x0400); // Q002113:0400
+	sds_write_v(sds, 0x21, 0x18, 0x6d02); // Q002118:6d02
+	sds_write_v(sds, 0x21, 0x1b, 0x424e); // Q00211b:424e
+	sds_write_v(sds, 0x21, 0x1d, 0x0002); // Q00211d:0002
+	sds_write_v(sds, 0x36, 0x1c, 0x1390); // Q00361c:1390
+	sds_write_v(sds, 0x36, 0x14, 0x003f); // Q003614:003f
+
 	sds_write_v(sds, 0x36, 0x10, v); // Q003610:0200
 
 	if (page == 0x2e) {  // 10G Fiber / SDS_QXGMII

cmd_parser.c

@@ -266,7 +266,7 @@ uint8_t cmd_parse_port(uint8_t idx) {
 		return 0;
 
 	port = machine.phys_to_log_port[port];
-	if (port < machine.min_port || port > machine.max_port)
+	if (!MACHINE_PORT_VALID(port))
 		return 0;
 
 	atoi_results_u8 = port;
@@ -743,7 +743,7 @@ void parse_isolate(void)
     }
 
 	if (cmd_compare(2, "off")) {
-		for (uint8_t i = machine.min_port; i <= machine.max_port; i++)
+		for (uint8_t i = MACHINE_MIN_PORT; i <= MACHINE_MAX_PORT; i++)
 			members |= ((uint16_t)1) << i;
 		members |= PMASK_CPU; // CPU-port
 		port_isolate(port_configured, members);
@@ -797,7 +797,7 @@ void parse_ingress(void)
 		if (!cmd_is_space_or_nul(idx))
 			goto err;
 		// Setting mode for all ports at once
-		for (log_port = machine.min_port; log_port <= machine.max_port; log_port++) {
+		for (log_port = MACHINE_MIN_PORT; log_port <= MACHINE_MAX_PORT; log_port++) {
 			if (!port_ingress_filter(log_port, mode)) {
 				cmd_error("cannot set the ingress filter for port "); print_phys_port(log_port); write_char('\n');
 				return;
@@ -849,7 +849,7 @@ void parse_mirror(void)
 			print_string("NOT Enabled: ");
 		}
 		print_string("Mirroring port: ");
-		print_phys_port(mirroring_port);
+		print_phys_port(mPort >> 1);
 		reg_read_m(RTL837x_MIRROR_CONF);
 		uint16_t m = sfr_data[0];
 		m = (m << 8) | sfr_data[1];
@@ -1019,7 +1019,7 @@ void parse_mtu(void)
 	uint8_t p;
 
 	if (cmd_compare(1, "show")) {
-		for (p = machine.min_port; p <= machine.max_port; p++) {
+		for (p = MACHINE_MIN_PORT; p <= MACHINE_MAX_PORT; p++) {
 			reg_read_m(RTL8373_REG_MAC_L2_PORT_MAX_LEN + ((uint16_t) p << 8));
 			uint16_t mtu = SFR_DATA_U16 & 0x3fff;
 			print_string("Port "); print_phys_port(p);
@@ -2329,6 +2329,7 @@ void health_show(void) __banked
 	ph_line("tx  ", HEALTH_PH_TX);
 	ph_line("stp ", HEALTH_PH_STP);
 	ph_line("cmd ", HEALTH_PH_CMD);
+	ph_line("lldp", HEALTH_PH_LLDP);
 
 	/* Stack: current depth plus how much of the painted area is untouched */
 	print_string("sp ");

cmd_parser.h

@@ -19,8 +19,8 @@ extern __xdata uint8_t err_status;
 #define HEALTH_PH_TX	3
 #define HEALTH_PH_STP	4
 #define HEALTH_PH_CMD	5
-#define HEALTH_PHASES	6
+#define HEALTH_PH_LLDP	6
-#define HEALTH_LLDP     7
+#define HEALTH_PHASES	(HEALTH_PH_LLDP + 1)	/* last id + 1: sizes the arrays in cmd_parser.c */
 
 extern __xdata uint16_t health_rx_frames;
 #define health_rx_frame()	health_rx_frames++

doc/adding-a-device.md

@@ -1,6 +1,6 @@
 # Adding a new device
 
-A device is supported by adding one board definition `.h` and board configuration `.c` file
+A device is supported by adding one board header `.h` and board definition `.c` file
 under `machine/`. 
 the build selects the definition by name, and CI compiles every file it finds.
 
@@ -14,27 +14,35 @@ make MACHINE=<NAME>
 | File | Purpose |
 |------|---------|
 | `machine/<NAME>.c` | the `struct machine machine` board definition |
-| `machine/<NAME>.h` | `MACHINE_MODEL`, the model string shown in the UI and the CLI |
+| `machine/<NAME>.h` | `MACHINE_MODEL` (the model string shown in the UI and the CLI) and `MACHINE_CHIPSET` (`RTL8372` or `RTL8373`) |
+| `machine/<NAME>_init.c` | optional `machine_custom_init()` boot hook, for registers the machine definition cannot express |
 | `doc/devices/<name>.md` + `doc/supported_devices.md` | (only if the board is verified and you want to support it publicly) user-facing documentation |
 
 `<NAME>` is the machine symbol without its `MACHINE_` prefix, so `MACHINE` is
 passed exactly as spelled on the command line: `make MACHINE=MY_BOARD_1_0`
 needs `machine/MY_BOARD_1_0.c` and `machine/MY_BOARD_1_0.h`.
 
-## Step 1: the model header
+## Step 1: the board header
 
-`machine/<NAME>.h` only carries the product string. Use the existing files as
+`machine/<NAME>.h` carries the product string and the SoC family. Use the
-the template:
+existing files as the template:
 
 ```c
 #ifndef _MACHINE_MY_BOARD_1_0_H_
 #define _MACHINE_MY_BOARD_1_0_H_
 
 #define MACHINE_MODEL "Brand Model V1.0"
+#define MACHINE_CHIPSET RTL8373
 
 #endif
 ```
 
+`MACHINE_CHIPSET` is `RTL8373` or `RTL8372`; a build without it will fail. It selects the default
+logical port range: `MACHINE_MIN_PORT` is `0` for RTL8373 and `3` for RTL8372, while
+`MACHINE_MAX_PORT` is `8`, the highest logical port index. A board with a different range defines
+`MACHINE_MIN_PORT` and/or `MACHINE_MAX_PORT` in its header to override the
+defaults.
+
 The device product string is what the CLI or the Web-Interface will print to identify the device; `machine.h` includes it by name.
 
 > [!NOTE]
@@ -55,10 +63,7 @@ ports and the same number of SFP+ cages.
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
+	MACHINE_COMMON_SETTING,
-	.isRTL8373 = 1,
-	.min_port = 0,
-	.max_port = 8,
 	.n_sfp = 1,
 	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
 	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
@@ -89,13 +94,16 @@ __code const struct machine machine = {
 };
 ```
 
+`MACHINE_COMMON_SETTING` (from `machine_defs.h`) initializes `machine_name` and
+`isRTL8373` from the header's `MACHINE_MODEL` and `MACHINE_CHIPSET`. The logical
+port range comes from `MACHINE_MIN_PORT` and `MACHINE_MAX_PORT` in `machine.h`.
+Keep it as the first initializer and list the board-specific fields after it.
+
 ### Fields
 
 | Field | Meaning |
 |-------|---------|
-| `machine_name` | always `MACHINE_MODEL` |
+| `MACHINE_COMMON_SETTING` | expands to `machine_name` (`MACHINE_MODEL`) and `isRTL8373` (`1` for `RTL8373`, `0` for `RTL8372`); both are derived from the header's `MACHINE_CHIPSET` (see Step 1) |
-| `isRTL8373` | `1` for an RTL8373 SoC, `0` for RTL8372 |
-| `min_port` / `max_port` | range of logical port numbers the device has; `min_port` is `0` for RTL8373 boards and `3` for RTL8372 boards (logical ports 1–2 are the SoC's internal ports on the 8372), `max_port` is usually 8. |
 | `n_sfp` | number of SFP+ cages |
 | `n_10g` | SerDes 10G capability used by the RTL837xN init: `0` none, `1` one, `2` two 10G-capable SerDes |
 | `log_to_phys_port[9]` | logical port (0-based index) → physical front-panel port number |
@@ -130,14 +138,30 @@ apart:
 ln -s KP_9000_6XHML_X2.c machine/MY_BOARD_1_0.c
 ```
 
-The new board still needs `machine/MY_BOARD_1_0.h` (pick the version number on the PCB) with its own
+The new board still needs `machine/MY_BOARD_1_0.h` (pick the version number on
-`MACHINE_MODEL`, because `MACHINE_MODEL` is what distinguishes the products.
+the PCB) with its own `MACHINE_MODEL` and `MACHINE_CHIPSET`: `MACHINE_MODEL` is
+what distinguishes the products, and `MACHINE_CHIPSET` must match the SoC of
+the board definition being reused.
 Existing examples: `machine/PCB_K0402WS_V3.c`, `machine/KP_9000_9XHML_X_V3_2.c`
 and the six `KP_9000_*` revision variants.
 
 Two files that differ only in whitespace or comments are duplicates and should
 be collapsed this way.
 
+### Optional custom init hook
+
+If the board needs custom initialization, add
+`machine/<NAME>_init.c` defining `machine_custom_init()`. The Makefile picks the
+file up by name and compiles it.
+
+Boards that need the same hook share one file: keep the code in a single
+`machine/<NAME>_init.c` whose `machine/<NAME>.c` is a real file (not a symlink),
+and make the other boards' `_init.c` symlinks to it, for example:
+
+```
+ln -s KP_9000_6XH_X2_init.c machine/MY_BOARD_1_0_init.c
+```
+
 ## Step 3: build and verify
 
 ```
@@ -151,7 +175,7 @@ file, before anything is compiled.
 Then run the checks CI runs:
 
 ```
-make machine_check    # compiles machine/<NAME>.c and machine_init.c for every machine
+make machine_check    # compiles machine/<NAME>.c and its optional _init.c for every machine
 make -C test          # host-side unit tests
 ```
 

doc/devices/2M-PCB51-ML-V1_1.md

@@ -1,11 +1,13 @@
 # MokerLink POE-2G080110GS
 
 The `POE-2G080110GS` is an unmanaged 8x2.5G RJ45 and 1xSFP+ PoE switch sold by Mokerlink. There is also a `POE-2G080110GSM` managed version of the switch which may be similar but this has not been verified on actual hardware.
+The`KP-9000-9XHP-X` is the KeepLink rebrand for same product.
 
 ## Brands
 | Brand  | Type             |Managed| PCB              | Flash           | Chip RTL      |
 |--------|------------------|-------|------------------|-----------------|---------------|
 | Mokerlink | POE-2G080110GS | No | 2M-PCB51-ML-V1.1 | 4MB (W25Q32JV) | 8373N + 8224N |
+| KeepLink  | KP-9000-9XHP-X | No | 2M-PCB51-ML-V1.1 | 4MB (W25Q32JV) | 8373N + 8224N |
 
 ## Hardware overview
 Front

doc/health.md

@@ -14,6 +14,7 @@ rx   max 00 slow 0x0000
 tx   max 00 slow 0x0000
 stp  max 04 slow 0x0001
 cmd  max 02 slow 0x0001
+lldp max 00 slow 0x0000
 sp 80 untouched 62
 tcp st 00 tmr 00 rtx 00 rto 00 len 0x0000 mss 0x05b4
   lport 0x0000 rport 0x0000 rip 0x0000 0x0000
@@ -46,7 +47,7 @@ a flooded CPU port from a stalled loop, which look identical from outside.
 ## Phases
 
 Each line is one section of the main loop: the link poll, SFP handling,
-frame reception, TCP transmission, the STP timers and the command dispatch.
+frame reception, TCP transmission, the STP timers, the LLDP timer and the command dispatch.
 `max` is the worst time that section has taken, in ticks of 5 ms; `slow`
 counts the passes that took two ticks or more. A misbehaving subsystem
 names itself here, which is the difference between knowing that the loop is

doc/supported_devices.md

@@ -29,6 +29,7 @@ The following devices have been tested and are fully working:
 | keepLINK | KP-9000-9XHML-X | Yes     | [2M-PCB23-V2.2](devices/2M-PCB23-V2_2.md)                                 | 2M    | 8 + 1 |
 | keepLINK | KP-9000-9XHML-X | Yes     | [2M-PCB23-V3.1](devices/2M-PCB23-V3_1.md)                                 | 2M    | 8 + 1 |
 | keepLINK | KP-9000-9XHML-X | Yes     | [2M-PCB23-V3.2](devices/2M-PCB23-V3_2.md)                                 | 2M    | 8 + 1 |
+| keepLINK | KP-9000-9XHP-X  | No      | [2M-PCB51-ML-V1.1](devices/2M-PCB51-ML-V1_1.md)                           | 4M    | 8 + 1 |
 | LIANGUO  | HYWS-SGT0108S   | No      | [2G5F_20G_V1.01](devices/HYWS-SGT0108S.md)                                | 0.5M  | 8 + 1 |
 | LIANGUO  | SWTG024AS       | No      | [SWTG024AS-v2.0-17452](devices/SWTG024AS.md)                              | 0.5M  | 4 + 2 |
 | LIANGUO  | ZX-SWTGW215AS   | Yes     | [PCB-SWTG115AS-V2.0 / PCB-SWTG115AS-V2.1](devices/SWTGW215AS.md)          | 2M    | 5 + 1 |

html/app.js

@@ -16,7 +16,7 @@ d_system:"System",d_traffic:"Traffic",
 d_traffic_h:"packets/s, live",d_txpps:"TX pps",d_rxpps:"RX pps",d_txbad:"TX bad",d_rxbad:"RX bad",
 i_host:"Hostname",i_ip:"IP address",i_mask:"Netmask",i_gw:"Gateway",i_mac:"MAC",i_fw:"Firmware",
 i_built:"Built",i_hw:"Hardware",i_temp:"Temperature",i_flash:"Flash",i_syslog:"Syslog",
-p_state:"State",p_disabled:"disabled",p_up:"up",p_txgb:"TX good / bad",p_rxgb:"RX good / bad",
+p_state:"State",p_disabled:"disabled",p_up:"up",
 p_pkts:"pkts",p_module:"Module",p_temp:"Temperature",p_vcc:"Vcc",p_txbias:"TX bias",p_txpower:"TX power",
 p_rxpower:"RX power",p_txfault:"TX fault",p_txdis:"TX disabled",p_rxlos:"RX LOS",p_adv:"Advertising",
 pt_title:"Port configuration",pt_conn:"Devices learned",pt_speed:"Speed",pt_mtu:"MTU",
@@ -147,7 +147,7 @@ d_system:"システム",d_traffic:"トラフィック",
 d_traffic_h:"パケット/秒、リアルタイム",d_txpps:"TX pps",d_rxpps:"RX pps",d_txbad:"TX 異常",d_rxbad:"RX 異常",
 i_host:"ホスト名",i_ip:"IP アドレス",i_mask:"ネットマスク",i_gw:"ゲートウェイ",i_mac:"MAC",i_fw:"ファームウェア",
 i_built:"ビルド日",i_hw:"ハードウェア",i_temp:"温度",i_flash:"フラッシュ",i_syslog:"Syslog",
-p_state:"状態",p_disabled:"無効",p_up:"アップ",p_txgb:"TX 正常 / 異常",p_rxgb:"RX 正常 / 異常",
+p_state:"状態",p_disabled:"無効",p_up:"アップ",
 p_pkts:"pkts",p_module:"モジュール",p_temp:"温度",p_vcc:"電圧",p_txbias:"TX バイアス",p_txpower:"TX 電力",
 p_rxpower:"RX 電力",p_txfault:"TX 障害",p_txdis:"TX 無効",p_rxlos:"RX 信号ロス",p_adv:"アドバタイズ",
 pt_title:"ポート設定",pt_conn:"学習済みデバイス",pt_speed:"速度",pt_mtu:"MTU",
@@ -260,7 +260,7 @@ d_system:"系统",d_traffic:"流量",
 d_traffic_h:"包/秒，实时",d_txpps:"TX pps",d_rxpps:"RX pps",d_txbad:"TX 错误",d_rxbad:"RX 错误",
 i_host:"主机名",i_ip:"IP 地址",i_mask:"子网掩码",i_gw:"网关",i_mac:"MAC",i_fw:"固件",
 i_built:"构建日期",i_hw:"硬件",i_temp:"温度",i_flash:"Flash",i_syslog:"Syslog",
-p_state:"状态",p_disabled:"已禁用",p_up:"已连接",p_txgb:"TX 正常 / 错误",p_rxgb:"RX 正常 / 错误",
+p_state:"状态",p_disabled:"已禁用",p_up:"已连接",
 p_pkts:"个包",p_module:"模块",p_temp:"温度",p_vcc:"供电电压",p_txbias:"TX 偏置电流",p_txpower:"TX 光功率",
 p_rxpower:"RX 光功率",p_txfault:"TX 故障",p_txdis:"TX 禁用",p_rxlos:"RX 信号丢失",p_adv:"通告能力",
 pt_title:"端口配置",pt_conn:"已学习设备",pt_speed:"速率",pt_mtu:"MTU",
@@ -373,7 +373,7 @@ d_system:"Sistema",d_traffic:"Tráfico",
 d_traffic_h:"paquetes/s, en vivo",d_txpps:"TX pps",d_rxpps:"RX pps",d_txbad:"TX erróneos",d_rxbad:"RX erróneos",
 i_host:"Nombre de host",i_ip:"Dirección IP",i_mask:"Máscara de red",i_gw:"Puerta de enlace",i_mac:"MAC",i_fw:"Firmware",
 i_built:"Compilado",i_hw:"Hardware",i_flash:"Flash",i_syslog:"Syslog",
-p_state:"Estado",p_disabled:"deshabilitado",p_up:"activo",p_txgb:"TX correctos / erróneos",p_rxgb:"RX correctos / erróneos",
+p_state:"Estado",p_disabled:"deshabilitado",p_up:"activo",
 p_pkts:"paquetes",p_module:"Módulo",p_temp:"Temperatura",p_vcc:"Vcc",p_txbias:"Polarización TX",p_txpower:"Potencia TX",
 p_rxpower:"Potencia RX",p_txfault:"Fallo TX",p_txdis:"TX deshabilitado",p_rxlos:"Pérdida RX (LOS)",p_adv:"Anunciado",
 pt_title:"Configuración de puerto",pt_conn:"Dispositivos aprendidos",pt_speed:"Velocidad",pt_mtu:"MTU",
@@ -485,7 +485,7 @@ d_system:"Système",d_traffic:"Trafic",
 d_traffic_h:"paquets/s (en direct)",d_txpps:"TX pps",d_rxpps:"RX pps",d_txbad:"TX KO",d_rxbad:"RX KO",
 i_host:"Nom d'hote",i_ip:"Adresse IP",i_mask:"Masque réseau",i_gw:"Passerelle",i_mac:"Adresse MAC",i_fw:"Micro logiciel",
 i_built:"Compilé le",i_hw:"Matériel",i_temp:"Température",i_flash:"Taille Flash",i_syslog:"Journal système",
-p_state:"Etat",p_disabled:"Inactif",p_up:"Actif",p_txgb:"TX bon / mauvais",p_rxgb:"RX bon / mauvais",
+p_state:"Etat",p_disabled:"Inactif",p_up:"Actif",
 p_pkts:"paquets",p_module:"Module",p_temp:"Température",p_vcc:"Vcc",p_txbias:"TX biais",p_txpower:"TX puissance",
 p_rxpower:"RX puissance",p_txfault:"TX erreur",p_txdis:"TX désactivé",p_rxlos:"RX pertes de signaux",p_adv:"Capacités",
 pt_title:"Configuration du port",pt_conn:"Appareils appris",pt_speed:"Vitesse",pt_mtu:"MTU",
@@ -602,7 +602,7 @@ d_system:"System",d_traffic:"Datenverkehr",
 d_traffic_h:"Pakete/s, live",d_txpps:"TX Pakete/s",d_rxpps:"RX Pakete/s",d_txbad:"TX fehlerhaft",d_rxbad:"RX fehlerhaft",
 i_host:"Hostname",i_ip:"IP-Adresse",i_mask:"Netzmaske",i_gw:"Gateway",i_mac:"MAC",i_fw:"Firmware",
 i_built:"Erstellt",i_hw:"Hardware",i_temp:"Temperatur",i_flash:"Flash",i_syslog:"Syslog",
-p_state:"Zustand",p_disabled:"deaktiviert",p_up:"verbunden",p_txgb:"TX gut / fehlerhaft",p_rxgb:"RX gut / fehlerhaft",
+p_state:"Zustand",p_disabled:"deaktiviert",p_up:"verbunden",
 p_pkts:"Pakete",p_module:"Modul",p_temp:"Temperatur",p_vcc:"Vcc",p_txbias:"TX-Bias",p_txpower:"Sendeleistung",
 p_rxpower:"Empfangsleistung",p_txfault:"TX-Fehler",p_txdis:"TX deaktiviert",p_rxlos:"RX LOS",p_adv:"Angeboten",
 pt_title:"Port-Konfiguration",pt_conn:"Gelernte Geräte",pt_speed:"Geschwindigkeit",pt_mtu:"MTU",
@@ -836,6 +836,7 @@ function isConfCmd(line){
 function setDirty(d){
   S.dirty=d;
   $("dirty").classList.toggle("show",d);
+  $("saveBtn").classList.toggle("pri",d);
 }
 function postCmd(cmd,quiet){
   return api("/cmd",{method:"POST",body:cmd}).then(function(r){
@@ -1024,8 +1025,10 @@ function portRows(p){
   var rows=[[t("c_port"),String(p.portNum)],[t("c_type"),p.isSFP?"SFP":"RJ45"]];
   if(p.name)rows.push([t("c_name"),p.name]);
   rows.push([t("p_state"),!p.enabled?t("p_disabled"):(p.link>0?t("p_up")+" "+LINKS[p.link]:t("c_down"))]);
-  rows.push([t("p_txgb"),BigInt(p.txG)+" / "+BigInt(p.txB)+" "+t("p_pkts")]);
+  rows.push([t("st_txg"),BigInt(p.txG)+" "+t("p_pkts")]);
-  rows.push([t("p_rxgb"),BigInt(p.rxG)+" / "+BigInt(p.rxB)+" "+t("p_pkts")]);
+  rows.push([t("st_txb"),BigInt(p.txB)+" "+t("p_pkts")]);
+  rows.push([t("st_rxg"),BigInt(p.rxG)+" "+t("p_pkts")]);
+  rows.push([t("st_rxb"),BigInt(p.rxB)+" "+t("p_pkts")]);
   if(p.isSFP){
     if(p.sfp_vendor)rows.push([t("p_module"),[p.sfp_vendor,p.sfp_model,p.sfp_serial].filter(Boolean).join(" / ")]);
     var ext=p.sfp_options&0x40;
@@ -2243,14 +2246,14 @@ var CONF_OVERWRITE=[
   /^ntp\s+server\b/,/^ntp\s+interval\b/,/^ntp\s+timezone\b/,/^ntp\s+dst\b/,
   /^vlan\s+\d{1,4}\s+mgmt$/,/^vlan\s+\d{1,4}(?!\s+mgmt\b)/,
   /^pvid\s+\d{1,2}\b/,
-  /^port\s+\d{1,2}(?!\s+name\b)/,/^port\s+\d{1,2}\s+name\b/,
+  /^port\s+\d{1,2}(?!\s+(name|lldp)\b)/,/^port\s+\d{1,2}\s+name\b/,
   /^mirror\b/,
   /^lag\s+\d\b/,/^laghash\s+\d\b/,/^isolate\s+\d{1,2}\b/,
   /^stp\s+(prio|hello|maxage|fwd|txhold|version)\b/,
   /^stp\s+(port\s+\d{1,2}|lag\s+[1-4])\s+(edge|cost|prio|guard|filter|p2p)\b/,
   /^igmp\b/,/^mtu\s+\d{1,2}\b/,/^storm\s+\d{1,2}\s+(bcast|mcast|ucast|umcast)\b/,
 ];
-var CONF_TOGGLE=[/^(syslog)\s+(on|off)$/,/^(ntp)\s+(on|off)$/,/^(stp)\s+(on|off)$/,/^(stp\s+(port\s+\d{1,2}|lag\s+[1-4]))\s+(on|off)$/];
+var CONF_TOGGLE=[/^(syslog)\s+(on|off)$/,/^(ntp)\s+(on|off)$/,/^(stp)\s+(on|off)$/,/^(lldp)\s+(on|off)$/,/^(stp\s+(port\s+\d{1,2}|lag\s+[1-4]))\s+(on|off)$/];
 function mergeConf(base,texts){
   var conf=base.slice();
   function drop(rx){conf=conf.filter(function(c){return!rx.test(c)})}
@@ -2268,6 +2271,7 @@ function mergeConf(base,texts){
       }
       if((m=line.match(/^lag (\d) lacp off$/))){drop(new RegExp("^lag "+m[1]+" lacp( |$)"));return;}
       if(line==="mirror off"){drop(/^mirror /);return;}
+      if((m=line.match(/^(port \d{1,2} lldp) (permit|block)$/))){drop(new RegExp("^"+m[1]+" (permit|block)$"));conf.push(line);return;}
       if(!isConfCmd(line))return;
       if((m=line.match(/^ingress (.+)$/))){
         if(/^[tua]$/.test(m[1])){drop(/^ingress /);conf.push(line);return;}
@@ -2300,7 +2304,7 @@ function mergeConf(base,texts){
           var key=line.match(rx)[0];
           conf=conf.filter(function(item){
             return!(item===key||(item.indexOf(key+" ")===0
-              &&!/\smgmt$/.test(item)&&item.indexOf(key+" name ")!==0));
+              &&!/\smgmt$/.test(item)&&item.indexOf(key+" name ")!==0&&item.indexOf(key+" lldp ")!==0));
           });
           break;
         }

html/index.html

@@ -89,6 +89,7 @@ table.t th{
   padding:6px 8px;border-bottom:1px solid var(--bd);white-space:nowrap;
 }
 table.t th[data-sort]{cursor:pointer;user-select:none}
+table.t th.num{text-align:right}
 table.t td{padding:6px 8px;border-bottom:1px solid var(--bd);vertical-align:middle}
 table.t tr:last-child td{border-bottom:0}
 table.t tr:hover td{background:var(--sel)}
@@ -223,7 +224,7 @@ button.danger{background:var(--bad);color:#fff;border-color:transparent}
     <span id="ttitle"></span>
     <div id="strip"></div>
     <span id="dirty" data-i18n="hdr_dirty" data-i18n-t="hdr_dirty_t">unsaved changes</span>
-    <button class="ctl pri" id="saveBtn" data-i18n="hdr_save" data-i18n-t="hdr_save_t">Save to flash</button>
+    <button class="ctl" id="saveBtn" data-i18n="hdr_save" data-i18n-t="hdr_save_t">Save to flash</button>
   </header>
 
   <main>
@@ -437,8 +438,8 @@ button.danger{background:var(--bad);color:#fff;border-color:transparent}
           <p class="small mut" style="margin-top:8px" data-i18n="sy_time_note">The switch has no battery backed clock.</p>
         </div>
         <div class="card"><h2 data-i18n="sy_password">Admin password</h2>
-          <label class="row"><span class="lb" data-i18n="sy_newpw">New password</span><input class="in" id="sy-pw1" type="password" maxlength="20"></label>
+          <label class="row"><span class="lb" data-i18n="sy_newpw">New password</span><input class="in" id="sy-pw1" type="password" autocomplete="new-password" maxlength="20"></label>
-          <label class="row"><span class="lb" data-i18n="sy_repeat">Repeat</span><input class="in" id="sy-pw2" type="password" maxlength="20"></label>
+          <label class="row"><span class="lb" data-i18n="sy_repeat">Repeat</span><input class="in" id="sy-pw2" type="password" autocomplete="new-password" maxlength="20"></label>
           <button class="ctl pri" id="sy-pwapply" style="margin-top:8px" data-i18n="sy_pwapply">Change password</button>
           <p class="small mut" style="margin-top:8px" data-i18n="sy_pw_note">Takes effect immediately; save to flash to keep it after reboot.</p>
         </div>

httpd/httpd.c

@@ -55,8 +55,8 @@ __xdata uint8_t boundary[72];
 #define CONFIG_UPLOAD_BUF (CONFIG_LEN + 384)
 __xdata uint8_t config_upload;
 __xdata uint8_t config_buf[CONFIG_UPLOAD_BUF];
-// bytes buffered in config_buf so far (config body, or a firmware part
+// bytes buffered in config_buf so far (HTTP header, POST body, or a firmware
-// header); accumulates across TCP segments
+// part header); accumulates across TCP segments
 __xdata uint16_t pre_acc;
 __xdata uint8_t * __xdata content_type = 0;
 __xdata uint8_t * __xdata session = 0;
@@ -75,9 +75,6 @@ __xdata uint8_t postbody_endpoint;
 __xdata uint16_t postbody_start;
 
 __xdata char passwd[21];
-// Set when a verified firmware upload awaits its response ACK, after
-// which the chip resets to apply the staged image
-__xdata uint8_t fw_reset_pending;
 __xdata char session_id[SESSION_ID_LENGTH + 1];
 __xdata uint8_t authenticated;
 __xdata uint32_t now;
@@ -90,6 +87,7 @@ __xdata uint32_t last_session_use;
 #define TSTATE_POST 		4
 #define TSTATE_MULTIPART	5
 #define TSTATE_POSTBODY		6
+#define TSTATE_HEADER		7
 
 extern __xdata uint16_t crc_value;
 __xdata uint16_t crc_final;
@@ -109,8 +107,8 @@ void httpd_init(void) __banked
 	uip_listen(HTONS(80));
 	// Not through uip_conn: it only points at a connection while uIP is
 	// handling one, and nothing has set it yet at init time.
-	uip_conns[0].appstate.tstate = TSTATE_CLOSED;
+	for (uint8_t i = 0; i < UIP_CONNS; i++)
-	fw_reset_pending = 0; // xdata is not zeroed by the startup code
+		uip_conns[i].appstate.tstate = TSTATE_CLOSED;
 }
 
 
@@ -450,15 +448,9 @@ static uint8_t config_take(void)
 // unlike scan_header(), keeps no auth state, so it may run on every buffered segment
 static uint16_t preamble_payload_start(uint16_t n)
 {
-	uint16_t pos;
+	// Skip the HTTP header separator retained by handle_post().
+	uint16_t pos = 4;
 
-	for (pos = 0; pos + 24 <= n; pos++) {
-		if (strstart(&config_buf[pos], "application/octet-stream"))
-			break;
-	}
-	if (pos + 24 > n)
-		return 0;
-	pos += 24;
 	while (pos + 3 < n && !strstart(&config_buf[pos], "\r\n\r\n"))
 		pos++;
 	if (pos + 3 >= n)
@@ -511,7 +503,7 @@ uint8_t stream_upload(void)
 						"Content-Type: text/plain\r\n\r\n"
 						"OK: checksum verified, rebooting\n");
 					// Reset once the response is fully ACKed
-					fw_reset_pending = 1;
+					s->fw_reset_pending = 1;
 				} else {
 					print_string("Checksum incorrect! Aborting.\n");
 					slen = strtox(outbuf, "HTTP/1.1 400 Bad Request\r\nContent-Length: 33\r\n"
@@ -746,7 +738,42 @@ static void post_body_continue(void)
 }
 
 
-void handle_post(void)
+
+/*
+ * Buffer an HTTP request header across TCP receive events. Stop copying at
+ * CRLFCRLF so any body bytes in the final segment stay in uip_appdata.
+ *
+ * Return the body offset in the current receive buffer, 0 while incomplete,
+ * or 0xffff after sending an error response.
+ */
+static uint16_t request_header_take(void)
+{
+	uint16_t i;
+
+	for (i = 0; i < uip_len; i++) {
+		if (pre_acc + 1 >= CONFIG_UPLOAD_BUF) {
+			uip_conn->appstate.tstate = TSTATE_NONE;
+			send_bad_request();
+			return 0xffff;
+		}
+		config_buf[pre_acc++] = ((__xdata uint8_t *)uip_appdata)[i];
+		config_buf[pre_acc] = NUL;
+		if (pre_acc >= 4
+		    && config_buf[pre_acc - 4] == '\r'
+		    && config_buf[pre_acc - 3] == '\n'
+		    && config_buf[pre_acc - 2] == '\r'
+		    && config_buf[pre_acc - 1] == '\n') {
+			uip_conn->appstate.tstate = TSTATE_NONE;
+			return i + 1;
+		}
+	}
+
+	postbody_start = ticks;
+	uip_conn->appstate.tstate = TSTATE_HEADER;
+	return 0;
+}
+
+void handle_post(uint16_t body_off)
 {
 	__xdata struct httpd_state * __xdata s = &(uip_conn->appstate);
 	__xdata uint8_t *p = uip_appdata;
@@ -759,6 +786,9 @@ void handle_post(void)
 
 	// Was the multipart header sent in multiple packets?
 	if (s->tstate != TSTATE_MULTIPART) {
+		p = config_buf;
+		request_path = p + 6;
+
 		dbg_string("Is POST\n");
 		p += 5;  // Skip post
 		// Find end of request path
@@ -772,9 +802,12 @@ void handle_post(void)
 		dbg_string("Boundary: >"); dbg_string_x(boundary); dbg_string("<\n");
 		if (!*p || !content_type) {
 			dbg_string("Bad Request!\n");
-			send_not_found();
+			send_bad_request();
 			return;
 		}
+
+		pre_acc = 0;
+		p = (__xdata uint8_t *)uip_appdata + body_off;
 		if (is_word(request_path, "upload")) {
 			if (!authenticated) {
 				send_unauthorized();
@@ -800,7 +833,10 @@ void handle_post(void)
 			dbg_string("Configuration upload\n");
 			verify_crc = 0;
 			config_upload = 1;
-			pre_acc = 0;
+			// config_take() matches CRLF-prefixed delimiters, including the first.
+			config_buf[0] = '\r';
+			config_buf[1] = '\n';
+			pre_acc = 2;
 		}
 		// Check for other POST requests, which are not multipart, below
 	} else {
@@ -824,7 +860,6 @@ void handle_post(void)
 			handle_firmware_fragment(p);
 		return;
 	} else if (is_word(request_path, "cmd")) {
-		p += 4;
 		if (!authenticated) {
 			send_unauthorized();
 			return;
@@ -843,7 +878,6 @@ void handle_post(void)
 			return;
 		}
 
-		p += 4;
 		postbody_endpoint = POSTBODY_LOGIN;
 		if (!post_body_take(p))
 			return;
@@ -874,9 +908,10 @@ void httpd_appcall(void)
 	print_byte(s->tstate);
 	write_char(' ');
 #endif
-	if(uip_connected() && s->tstate == TSTATE_CLOSED) {
+	if(uip_connected()) {
 		dbg_string("Connected...\n");
 		s->tstate = TSTATE_NONE;
+		s->fw_reset_pending = 0; // explicitly initialize reused XDATA appstate
 	} else if (uip_closed()) {
 		dbg_string("Connection closed\n");
 		s->tstate = TSTATE_CLOSED;
@@ -890,9 +925,9 @@ void httpd_appcall(void)
 			dbg_string("Closing because everything has been transmitted\n");
 			uip_close();
 			s->tstate = TSTATE_CLOSED;
-		} else if (s->tstate == TSTATE_POSTBODY
+		} else if ((s->tstate == TSTATE_POSTBODY || s->tstate == TSTATE_HEADER)
 			   && (uint16_t)ticks - postbody_start > POSTBODY_TIMEOUT) {
-			dbg_string("Body never arrived\n");
+			dbg_string("HTTP request never completed\n");
 			uip_abort();
 			s->tstate = TSTATE_CLOSED;
 		}
@@ -928,7 +963,7 @@ void httpd_appcall(void)
 			cont_len -= slen;
 			cont_addr += slen;
 			s->tstate = TSTATE_TX;
-		} else if (fw_reset_pending) {
+		} else if (s->fw_reset_pending) {
 			// The upload verdict has been fully ACKed by the client;
 			// now it is safe to reset and apply the staged image
 			print_string("Resetting to apply update\n");
@@ -955,6 +990,7 @@ void httpd_appcall(void)
 		cont_len = 0;
 		dbg_char('<'); dbg_short(uip_len); dbg_char('\n');
 		__xdata uint8_t *p = uip_appdata;
+		uint16_t body_off = 0;
 		// Mark end of request header with \0
 		p[uip_len] = 0;
 #ifdef DEBUG
@@ -963,9 +999,21 @@ void httpd_appcall(void)
 		dbg_char('\n');
 #endif
 		p = uip_appdata;
-		if (is_word(p, "POST") || s->tstate == TSTATE_MULTIPART
+		if (s->tstate != TSTATE_MULTIPART && s->tstate != TSTATE_POSTBODY) {
-		    || s->tstate == TSTATE_POSTBODY) {
+			if (s->tstate != TSTATE_HEADER)
-			handle_post();
+				pre_acc = 0;
+			body_off = request_header_take();
+			if (!body_off) {
+				uip_len = 0;
+				return;
+			}
+			if (body_off == 0xffff)
+				goto do_send;
+		}
+
+		if (s->tstate == TSTATE_MULTIPART || s->tstate == TSTATE_POSTBODY
+		    || is_word(config_buf, "POST")) {
+			handle_post(body_off);
 			// If this is an ongoing post stream, then wait for the next packet
 			if (s->tstate == TSTATE_POST || s->tstate == TSTATE_MULTIPART
 			    || s->tstate == TSTATE_POSTBODY) {
@@ -975,12 +1023,11 @@ void httpd_appcall(void)
 			goto do_send;
 		}
 
-		// We only expect a GET request here.
+		p = config_buf;
 		if (!is_word(p, "GET")) {
 			send_bad_request();
 			goto do_send;
 		}
-
 		dbg_string("GET request ");
 		p += 4;
 		scan_header(p);

httpd/httpd.h

@@ -12,6 +12,7 @@
    for each TCP connection. */
 typedef struct httpd_state {
    uint8_t tstate;
+   uint8_t fw_reset_pending;
 } uip_tcp_appstate_t;
 
 /* Finally we define the application function to be called by uIP. */

httpd/page_impl.c

@@ -341,7 +341,7 @@ void send_vlan(uint16_t vlan)
 	}
 	slen += strtox(outbuf + slen, "\",\"pvid\":\"0x");
 	uint16_t pvid_mask = 0;
-	for (uint8_t i = machine.min_port; i <= machine.max_port; i++) {
+	for (uint8_t i = MACHINE_MIN_PORT; i <= MACHINE_MAX_PORT; i++) {
 		if (port_pvid_get(i) == vlan)
 			pvid_mask |= (1 << i);
 }
@@ -357,7 +357,7 @@ void send_vlan(uint16_t vlan)
 bool send_counters(uint8_t phys_port)
 {
 	uint8_t phys_port_idx = phys_port - 1;
-	if (phys_port_idx > (machine.max_port - machine.min_port))
+	if (phys_port_idx > (MACHINE_MAX_PORT - MACHINE_MIN_PORT))
 		goto err;
 	uint8_t log_port = machine.phys_to_log_port[phys_port_idx];
 
@@ -676,7 +676,7 @@ void send_stp(void)
 	slen += strtox(outbuf + slen, "\",\"ports\":[");
 	reg_read_m(RTL837X_MSTP_STATES);
 	for (i = 0; i < STP_ENTITIES; i++) {
-		if (i < STP_LAG_BASE && (i < machine.min_port || i > machine.max_port))
+		if (i < STP_LAG_BASE && !MACHINE_PORT_VALID(i))
 			continue;
 		if (i < STP_LAG_BASE && stp_ent_of[i] != i)
 			continue;
@@ -761,7 +761,7 @@ void send_lacp(void)
 	}
 	slen -= 1; // remove comma
 	slen += strtox(outbuf + slen, "],\"ports\":[");
-	for (uint8_t i = machine.min_port; i <= machine.max_port; i++) {
+	for (uint8_t i = MACHINE_MIN_PORT; i <= MACHINE_MAX_PORT; i++) {
 		slen += strtox(outbuf + slen, "{\"p\":");
 		itoa_html(machine.log_to_phys_port[i]);
 		slen += strtox(outbuf + slen, ",\"lag\":");
@@ -793,7 +793,7 @@ void send_lldp(void)
 	bool_to_html(lldp_enabled);
 	slen += strtox(outbuf + slen, ",\"portStatus\":[");
 
-	for (uint8_t i = machine.min_port; i <= machine.max_port; i++) {
+	for (uint8_t i = MACHINE_MIN_PORT; i <= MACHINE_MAX_PORT; i++) {
 		slen += strtox(outbuf + slen, "{\"portNum\":");
 		itoa_html(machine.log_to_phys_port[i]);
 
@@ -808,7 +808,7 @@ void send_lldp(void)
 		bool_to_html(1 & (lldp_logical_port_status >> i));
 		slen += strtox(outbuf + slen, "}");
 
-		if (i < machine.max_port)
+		if (i < MACHINE_MAX_PORT)
 			char_to_html(',');
 		else
 			char_to_html(']');
@@ -825,7 +825,7 @@ void send_eee(void)
 	uint8_t eee_ablty = sfr_data[3];
 
 	char_to_html('[');
-	for (uint8_t i = machine.min_port; i <= machine.max_port; i++) {
+	for (uint8_t i = MACHINE_MIN_PORT; i <= MACHINE_MAX_PORT; i++) {
 		slen += strtox(outbuf + slen, "{\"portNum\":");
 		itoa_html(machine.log_to_phys_port[i]);
 
@@ -857,7 +857,7 @@ void send_eee(void)
 			bool_to_html(eee_ablty & (1 << i));
 		}
 		char_to_html('}');
-		if (i < machine.max_port)
+		if (i < MACHINE_MAX_PORT)
 			char_to_html(',');
 		else
 			char_to_html(']');
@@ -870,7 +870,7 @@ void send_bandwidth(void)
 	dbg_string("send_bandwidth called\n");
 	slen = strtox(outbuf, HTTP_RESPONCE_JSON);
 	char_to_html('[');
-	for (uint8_t i = machine.min_port; i <= machine.max_port; i++) {
+	for (uint8_t i = MACHINE_MIN_PORT; i <= MACHINE_MAX_PORT; i++) {
 		slen += strtox(outbuf + slen, "{\"portNum\":");
 		itoa_html(machine.log_to_phys_port[i]);
 		slen += strtox(outbuf + slen, ",\"iLimited\":");
@@ -900,7 +900,7 @@ void send_bandwidth(void)
 		byte_to_html(sfr_data[3]);
 		char_to_html('"');
 		char_to_html('}');
-		if (i < machine.max_port)
+		if (i < MACHINE_MAX_PORT)
 			char_to_html(',');
 		else
 			char_to_html(']');
@@ -914,7 +914,7 @@ void send_storm(void)
 
 	slen = strtox(outbuf, HTTP_RESPONCE_JSON);
 	char_to_html('[');
-	for (i = machine.min_port; i <= machine.max_port; i++) {
+	for (i = MACHINE_MIN_PORT; i <= MACHINE_MAX_PORT; i++) {
 		slen += strtox(outbuf + slen, "{\"portNum\":");
 		itoa_html(machine.log_to_phys_port[i]);
 		slen += strtox(outbuf + slen, ",\"en\":\"");
@@ -934,7 +934,7 @@ void send_storm(void)
 		}
 		char_to_html('"');
 		char_to_html('}');
-		if (i < machine.max_port)
+		if (i < MACHINE_MAX_PORT)
 			char_to_html(',');
 		else
 			char_to_html(']');
@@ -949,7 +949,7 @@ void send_isolation(void)
 	dbg_string("send_isolation called\n");
 	slen = strtox(outbuf, HTTP_RESPONCE_JSON);
 	char_to_html('[');
-	for (uint8_t i = machine.min_port; i <= machine.max_port; i++) {
+	for (uint8_t i = MACHINE_MIN_PORT; i <= MACHINE_MAX_PORT; i++) {
 		slen += strtox(outbuf + slen, "{\"portNum\":");
 		itoa_html(machine.log_to_phys_port[i]);
 		slen += strtox(outbuf + slen, ",\"allow\":\"");
@@ -958,7 +958,7 @@ void send_isolation(void)
 		byte_to_html(allow & 0xff);
 		char_to_html('"');
 		char_to_html('}');
-		if (i < machine.max_port)
+		if (i < MACHINE_MAX_PORT)
 			char_to_html(',');
 	}
 	char_to_html(']');
@@ -970,7 +970,7 @@ void send_mtu(void)
 	dbg_string("send_mtu called\n");
 	slen = strtox(outbuf, HTTP_RESPONCE_JSON);
 	char_to_html('[');
-	for (uint8_t i = machine.min_port; i <= machine.max_port; i++) {
+	for (uint8_t i = MACHINE_MIN_PORT; i <= MACHINE_MAX_PORT; i++) {
 		slen += strtox(outbuf + slen, "{\"portNum\":");
 		itoa_html(machine.log_to_phys_port[i]);
 		slen += strtox(outbuf + slen, ",\"mtu\":\"0x");
@@ -980,7 +980,7 @@ void send_mtu(void)
 		byte_to_html(mtu & 0xff);
 		char_to_html('"');
 		char_to_html('}');
-		if (i < machine.max_port)
+		if (i < MACHINE_MAX_PORT)
 			char_to_html(',');
 		else
 			char_to_html(']');
@@ -994,7 +994,7 @@ void send_status(void)
 	dbg_string("sending status\n");
 	char_to_html('[');
 
-	for (uint8_t i = machine.min_port; i <= machine.max_port; i++) {
+	for (uint8_t i = MACHINE_MIN_PORT; i <= MACHINE_MAX_PORT; i++) {
 		slen += strtox(outbuf + slen, "{\"portNum\":");
 		itoa_html(machine.log_to_phys_port[i]);
 		slen += strtox(outbuf + slen, ",\"logPort\":");
@@ -1115,7 +1115,7 @@ void send_status(void)
 		slen += strtox(outbuf + slen, "\",\"macs\":\"0x");
 		reg_to_html(RTL837X_L2_LRN_PORT_CONSTRT_CNT + (i << 2));
 		slen += strtox(outbuf + slen, "\"}");
-		if (i < machine.max_port)
+		if (i < MACHINE_MAX_PORT)
 			char_to_html(',');
 		else
 			char_to_html(']');

machine.h

@@ -15,8 +15,51 @@
 
 #define MACHINE_INC(dir,file) MACHINE_STR(dir/file)
 
+#define RTL8370 0x70
+#define RTL8372 0x72
+#define RTL8373 0x73
+
 #include  MACHINE_INC(MACHINE_DEF_DIR,MACHINE_NAME.h)
 
+
+#ifndef MACHINE_CHIPSET
+#error "MACHINE_CHIPSET shall be defined in <machine>.h file"
+#endif
+
+#ifndef MACHINE_MIN_PORT
+#if MACHINE_CHIPSET == RTL8372
+#define MACHINE_MIN_PORT 3
+#else
+#define MACHINE_MIN_PORT 0
+#endif
+#endif
+
+#ifndef MACHINE_MAX_PORT
+#if MACHINE_CHIPSET == RTL8370
+#define MACHINE_MAX_PORT 7
+#else
+#define MACHINE_MAX_PORT 8
+#endif
+#endif
+
+#define MACHINE_PORT_VALID(p) \
+	((uint8_t)((p) - MACHINE_MIN_PORT) <= (MACHINE_MAX_PORT - MACHINE_MIN_PORT))
+
+// auto derive SOC_FAMILY
+#define RTL836X 6
+#define RTL837X 7
+
+#ifdef SOC_FAMILY
+#error "SOC_FAMILY can not be manually defined, shall be auto derived"
+#endif
+#if (MACHINE_CHIPSET == RTL8372) || (MACHINE_CHIPSET == RTL8373)
+#define SOC_FAMILY RTL837X
+#elif (MACHINE_CHIPSET == RTL8370 )
+#define SOC_FAMILY RTL836X
+#else
+#error "Unsupported MACHINE_CHIPSET is specified!"
+#endif
+
 #define LED_27 1
 // SYSTEM LED
 #define LED_28_SYS 2
@@ -41,10 +84,6 @@ struct sfp_port
 struct machine {
 	char machine_name[30];
 	uint8_t isRTL8373;
-	// Lowest logical port number
-	uint8_t min_port;
-	// Highest logical port number
-	uint8_t max_port;
 	uint8_t n_sfp;
 	uint8_t n_10g;
 	uint8_t log_to_phys_port[9];

machine/2G08110GSN.h

@@ -2,5 +2,6 @@
 #define _MACHINE_2G08110GSN_H_
 
 #define MACHINE_MODEL "MokerLink 2G08110GSN"
+#define MACHINE_CHIPSET RTL8373
 
 #endif

machine/2G5F4_10G2_V1_01.c

@@ -1,10 +1,7 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
+	MACHINE_COMMON_SETTING,
-	.isRTL8373 = 0,
-	.min_port = 3,
-	.max_port = 8,
 	.n_sfp = 2,
 	/* Same 2M-PCB43-V1.1 board family as the KP-9000-6XH-X2 (see
 	 * machine/KP_9000_6XHML_X2.c), but the two SFP+ cages (physical ports 5 and
@@ -44,8 +41,8 @@ __code const struct machine machine = {
 	 * at 2.5G only) and LED-ID2 carries the SFP single LED. The "solid"
 	 * conditions (LINK/speed) barely drive the LEDs here and ACT is what
 	 * actually lights them, which is why the white LED used to glow faintly at
-	 * non-2.5G speeds; the fix for that is LED_GLB_IO_EN bit 6, set in
+	 * non-2.5G speeds; the fix for that is LED_GLB_IO_EN bit 6, set in the
-	 * machine_init.c. */
+	 * shared machine_custom_init() hook (machine/2G5F4_10G2_V1_01_init.c). */
 	.led_sets = { { LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
 			LEDS_2G5 | LEDS_LINK | LEDS_10G,
 			LEDS_1G | LEDS_LINK,

machine/2G5F4_10G2_V1_01.h

@@ -2,5 +2,6 @@
 #define _MACHINE_2G5F4_10G2_V1_01_H_
 
 #define MACHINE_MODEL "2G5F4_10G2_V1.01 / SGT0204S"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/2G5F4_10G2_V1_01_init.c

@@ -0,0 +1 @@
+KP_9000_6XH_X2_init.c

machine/DEFAULT_8C_1SFP.h

@@ -2,5 +2,6 @@
 #define _MACHINE_DEFAULT_8C_1SFP_H_
 
 #define MACHINE_MODEL "8+1 SFP Port Switch"
+#define MACHINE_CHIPSET RTL8373
 
 #endif

machine/F7008_2_5.c

@@ -1,10 +1,7 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
+	MACHINE_COMMON_SETTING,
-	.isRTL8373 = 1,
-	.min_port = 0,
-	.max_port = 8,
 	.n_sfp = 1,
 	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
 	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},

machine/F7008_2_5.h

@@ -2,5 +2,6 @@
 #define _MACHINE_F7008_2_5_H_
 
 #define MACHINE_MODEL "F7008-2.5 8+1 SFP Port Switch"
+#define MACHINE_CHIPSET RTL8373
 
 #endif

machine/FG_4GT_2SX_V2_0.c

@@ -1,10 +1,7 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
+	MACHINE_COMMON_SETTING,
-	.isRTL8373 = 0,
-	.min_port = 3,
-	.max_port = 8,
 	.n_sfp = 2,
 	.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
 	.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},

machine/FG_4GT_2SX_V2_0.h

@@ -2,5 +2,6 @@
 #define _MACHINE_FG_4GT_2SX_V2_0_H_
 
 #define MACHINE_MODEL "FG-4GT-2SX_V2.0"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/FG_4GT_2SX_V2_0_init.c

@@ -0,0 +1,6 @@
+#include "machine_init_defs.h"
+
+void machine_custom_init(void) __banked
+{
+	REG_SET(RTL837X_REG_LED_GLB_IO_EN, 0x7624155b);
+}

machine/FG_8GT_1SX.c

@@ -1,10 +1,7 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
+	MACHINE_COMMON_SETTING,
-	.isRTL8373 = 1,
-	.min_port = 0,
-	.max_port = 8,
 	.n_sfp = 1,
 	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
 	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},

machine/FG_8GT_1SX.h

@@ -2,5 +2,6 @@
 #define _MACHINE_FG_8GT_1SX_H_
 
 #define MACHINE_MODEL "FG-8GT-1SX"
+#define MACHINE_CHIPSET RTL8373
 
 #endif

machine/FNS1200P.h

@@ -2,5 +2,6 @@
 #define _MACHINE_FNS1200P_H_
 
 #define MACHINE_MODEL "FNS-1200P"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/FNS1200P_init.c

@@ -0,0 +1 @@
+KP_9000_6XH_X2_init.c

machine/GT_ST018M.h

@@ -2,5 +2,6 @@
 #define _MACHINE_GT_ST018M_H_
 
 #define MACHINE_MODEL "GoodTop GT-ST018M"
+#define MACHINE_CHIPSET RTL8373
 
 #endif

machine/GT_ST024M.h

@@ -2,5 +2,6 @@
 #define _MACHINE_GT_ST024M_H_
 
 #define MACHINE_MODEL "GoodTop GT-ST024M"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/HASIVO_S1100P_8GT_1SX_S.c

@@ -1,11 +1,8 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
+	MACHINE_COMMON_SETTING,
-	.isRTL8373 = 1,
 	.mac_flash_offset = 0x1FC000,
-	.min_port = 0,
-	.max_port = 8,
 	.n_sfp = 1,
 	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
 	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},

machine/HASIVO_S1100P_8GT_1SX_S.h

@@ -2,5 +2,6 @@
 #define _MACHINE_HASIVO_S1100P_8GT_1SX_S_H_
 
 #define MACHINE_MODEL "Hasivo S1100P-8GT-1SX-S"
+#define MACHINE_CHIPSET RTL8373
 
 #endif

machine/HASIVO_S1100WP_8GT_1SX_SE.h

@@ -2,5 +2,6 @@
 #define _MACHINE_HASIVO_S1100WP_8GT_1SX_SE_H_
 
 #define MACHINE_MODEL "Hasivo S1100WP-8GT-1SX-SE"
+#define MACHINE_CHIPSET RTL8373
 
 #endif

machine/HASIVO_S600W_4GT_2XGT_SE.c

@@ -1,10 +1,7 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-    .machine_name = MACHINE_MODEL,
+    MACHINE_COMMON_SETTING,
-    .isRTL8373 = 0,
-    .min_port = 3,
-    .max_port = 8,
     .n_sfp = 0,
     .n_10g = 2,
     .log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},

machine/HASIVO_S600W_4GT_2XGT_SE.h

@@ -2,5 +2,6 @@
 #define _MACHINE_HASIVO_S600W_4GT_2XGT_SE_H_
 
 #define MACHINE_MODEL "Hasivo S600W-4GT-2XGT-SE"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/HC_SWTG124AS.h

@@ -2,5 +2,6 @@
 #define _MACHINE_HC_SWTG124AS_H_
 
 #define MACHINE_MODEL "Horaco HC-SWTG124AS"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/HG0402XG_V1_1.c

@@ -1,10 +1,7 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
+	MACHINE_COMMON_SETTING,
-	.isRTL8373 = 0,
-	.min_port = 3,
-	.max_port = 8,
 	.n_sfp = 2,
 	.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
 	.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},

machine/HG0402XG_V1_1.h

@@ -2,5 +2,6 @@
 #define _MACHINE_HG0402XG_V1_1_H_
 
 #define MACHINE_MODEL "HG0402XG V1.1"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/HI_K0402WS.c

@@ -1,10 +1,7 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
+	MACHINE_COMMON_SETTING,
-	.isRTL8373 = 0,
-	.min_port = 3,
-	.max_port = 8,
 	.n_sfp = 2,
 	.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
 	.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},

machine/HI_K0402WS.h

@@ -2,5 +2,6 @@
 #define _MACHINE_HI_K0402WS_H_
 
 #define MACHINE_MODEL "PCB-K0402WS-V3.0"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/HI_K0402WS_init.c

@@ -0,0 +1 @@
+KP_9000_6XH_X2_init.c

machine/HI_K0801WS.c

@@ -1,10 +1,7 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-    .machine_name = MACHINE_MODEL,
+    MACHINE_COMMON_SETTING,
-    .isRTL8373 = 1,
-    .min_port = 0,
-    .max_port = 8,
     .n_sfp = 1,
     .log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
     .phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},

machine/HI_K0801WS.h

@@ -2,5 +2,6 @@
 #define _MACHINE_HI_K0801WS_H_
 
 #define MACHINE_MODEL "Hi-Source HI-k0801WS"
+#define MACHINE_CHIPSET RTL8373
 
 #endif

machine/K0501W_V2_0.c

@@ -1,10 +1,7 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
+	MACHINE_COMMON_SETTING,
-	.isRTL8373 = 0,
-	.min_port = 3,
-	.max_port = 8,
 	.n_sfp = 1,
 	.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
 	.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},

machine/K0501W_V2_0.h

@@ -2,5 +2,6 @@
 #define _MACHINE_K0501W_V2_0_H_
 
 #define MACHINE_MODEL "K0501W V2.0"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/KP_9000_6XHML_X2.c

@@ -1,10 +1,7 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
+	MACHINE_COMMON_SETTING,
-	.isRTL8373 = 0,
-	.min_port = 3,
-	.max_port = 8,
 	.n_sfp = 2,
 	.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
 	.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},

machine/KP_9000_6XHML_X2.h

@@ -2,5 +2,6 @@
 #define _MACHINE_KP_9000_6XHML_X2_H_
 
 #define MACHINE_MODEL "keepLink KP-9000-6XHML-X2"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/KP_9000_6XHML_X2_V1_1.h

@@ -2,5 +2,6 @@
 #define _MACHINE_KP_9000_6XHML_X2_V1_1_H_
 
 #define MACHINE_MODEL "keepLink KP-9000-6XHML V1.1"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/KP_9000_6XHML_X2_V1_2.h

@@ -2,5 +2,6 @@
 #define _MACHINE_KP_9000_6XHML_X2_V1_2_H_
 
 #define MACHINE_MODEL "keepLink KP-9000-6XHML V1.2"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/KP_9000_6XHML_X2_V2_1.h

@@ -2,5 +2,6 @@
 #define _MACHINE_KP_9000_6XHML_X2_V2_1_H_
 
 #define MACHINE_MODEL "keepLink KP-9000-6XHML V2.1"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/KP_9000_6XHML_X2_V2_1_init.c

@@ -0,0 +1 @@
+KP_9000_6XH_X2_init.c

machine/KP_9000_6XH_X.c

@@ -1,10 +1,7 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
+	MACHINE_COMMON_SETTING,
-	.isRTL8373 = 0,
-	.min_port = 3,
-	.max_port = 8,
 	.n_sfp = 1,
 	.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
 	.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},

machine/KP_9000_6XH_X.h

@@ -2,5 +2,6 @@
 #define _MACHINE_KP_9000_6XH_X_H_
 
 #define MACHINE_MODEL "keepLink KP-9000-6XH-X"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/KP_9000_6XH_X2.c

@@ -1,10 +1,7 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
+	MACHINE_COMMON_SETTING,
-	.isRTL8373 = 0,
-	.min_port = 3,
-	.max_port = 8,
 	.n_sfp = 2,
 	.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
 	.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},

machine/KP_9000_6XH_X2.h

@@ -2,5 +2,6 @@
 #define _MACHINE_KP_9000_6XH_X2_H_
 
 #define MACHINE_MODEL "keepLink KP-9000-6XH-X2"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/KP_9000_6XH_X2_V1_1.h

@@ -2,5 +2,6 @@
 #define _MACHINE_KP_9000_6XH_X2_V1_1_H_
 
 #define MACHINE_MODEL "keepLink KP-9000-6XH V1.1"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/KP_9000_6XH_X2_V1_2.h

@@ -2,5 +2,6 @@
 #define _MACHINE_KP_9000_6XH_X2_V1_2_H_
 
 #define MACHINE_MODEL "keepLink KP-9000-6XH V1.2"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/KP_9000_6XH_X2_V2_1.h

@@ -2,5 +2,6 @@
 #define _MACHINE_KP_9000_6XH_X2_V2_1_H_
 
 #define MACHINE_MODEL "keepLink KP-9000-6XH-X2 V2.1"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/KP_9000_6XH_X2_V2_1_init.c

@@ -0,0 +1 @@
+KP_9000_6XH_X2_init.c

machine/KP_9000_6XH_X2_init.c

@@ -0,0 +1,6 @@
+#include "machine_init_defs.h"
+
+void machine_custom_init(void) __banked
+{
+	reg_bit_set(RTL837X_REG_LED_GLB_IO_EN, 6);
+}

machine/KP_9000_9XHML_X_V2_2.c

@@ -1,10 +1,7 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
+	MACHINE_COMMON_SETTING,
-	.isRTL8373 = 1,
-	.min_port = 0,
-	.max_port = 8,
 	.n_sfp = 1,
 	.log_to_phys_port = { 1, 2, 3, 4, 5, 6, 7, 8, 9 },
 	.phys_to_log_port = { 0, 1, 2, 3, 4, 5, 6, 7, 8 },

machine/KP_9000_9XHML_X_V2_2.h

@@ -2,5 +2,6 @@
 #define _MACHINE_KP_9000_9XHML_X_V2_2_H_
 
 #define MACHINE_MODEL "keepLink KP-9000-9XHML-X V2.2"
+#define MACHINE_CHIPSET RTL8373
 
 #endif

machine/KP_9000_9XHML_X_V3_1.c

@@ -2,10 +2,7 @@
 
 // 2M-PCB23-V3.2 is wired like V3.1 (SFP detection, LEDs, factory MAC location)
 __code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
+	MACHINE_COMMON_SETTING,
-	.isRTL8373 = 1,
-	.min_port = 0,
-	.max_port = 8,
 	.n_sfp = 1,
 	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
 	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},

machine/KP_9000_9XHML_X_V3_1.h

@@ -2,5 +2,6 @@
 #define _MACHINE_KP_9000_9XHML_X_V3_1_H_
 
 #define MACHINE_MODEL "keepLink KP-9000-9XHML-X V3.1"
+#define MACHINE_CHIPSET RTL8373
 
 #endif

machine/KP_9000_9XHML_X_V3_2.h

@@ -2,5 +2,6 @@
 #define _MACHINE_KP_9000_9XHML_X_V3_2_H_
 
 #define MACHINE_MODEL "keepLink KP-9000-9XHML-X V3.2"
+#define MACHINE_CHIPSET RTL8373
 
 #endif

machine/KP_9000_9XH_X_EU.c

@@ -1,10 +1,7 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
+	MACHINE_COMMON_SETTING,
-	.isRTL8373 = 1,
-	.min_port = 0,
-	.max_port = 8,
 	.n_sfp = 1,
 	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
 	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},

machine/KP_9000_9XH_X_EU.h

@@ -2,5 +2,6 @@
 #define _MACHINE_KP_9000_9XH_X_EU_H_
 
 #define MACHINE_MODEL "keepLink KP-9000-9XH-X-EU"
+#define MACHINE_CHIPSET RTL8373
 
 #endif

machine/LIANGUO_HYWS_SGT0108S.c

@@ -1,10 +1,7 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-    .machine_name = MACHINE_MODEL,
+    MACHINE_COMMON_SETTING,
-    .isRTL8373 = 1,
-    .min_port = 0,
-    .max_port = 8,
     .n_sfp = 1,
     .log_to_phys_port = {2, 1, 4, 3, 5, 6, 7, 8, 9},
     .phys_to_log_port = {1, 0, 3, 2, 4, 5, 6, 7, 8},

machine/LIANGUO_HYWS_SGT0108S.h

@@ -2,5 +2,6 @@
 #define _MACHINE_LIANGUO_HYWS_SGT0108S_H_
 
 #define MACHINE_MODEL "Lianguo HYWS-SGT0108S"
+#define MACHINE_CHIPSET RTL8373
 
 #endif

machine/LIANGUO_ZX_SWTGW215AS.c

@@ -1,11 +1,8 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
+	MACHINE_COMMON_SETTING,
-	.isRTL8373 = 0,
 	.mac_flash_offset = 0x1FC000,
-	.min_port = 3,
-	.max_port = 8,
 	.n_sfp = 1,
 	.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
 	.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},

machine/LIANGUO_ZX_SWTGW215AS.h

@@ -2,5 +2,6 @@
 #define _MACHINE_LIANGUO_ZX_SWTGW215AS_H_
 
 #define MACHINE_MODEL "Lianguo ZX-SWTGW215AS"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/ONT_S207CW_62TS_SE.c

@@ -1,10 +1,7 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-    .machine_name = MACHINE_MODEL,
+    MACHINE_COMMON_SETTING,
-    .isRTL8373 = 0,
-    .min_port = 3,
-    .max_port = 8,
     .n_sfp = 2,
     .log_to_phys_port = {0, 0, 0, 5, 4, 3, 2, 1, 6},
     .phys_to_log_port = {7, 6, 5, 4, 3, 8, 0, 0, 0},

machine/ONT_S207CW_62TS_SE.h

@@ -2,5 +2,6 @@
 #define _MACHINE_ONT_S207CW_62TS_SE_H_
 
 #define MACHINE_MODEL "ONT-S207CW-62TS-SE / Binardat 2G06-04210GSM / Binardat 2G06-04210GS"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/PB_2132.c

@@ -1,10 +1,7 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
+	MACHINE_COMMON_SETTING,
-	.isRTL8373 = 1,
-	.min_port = 0,
-	.max_port = 8,
 	.n_sfp = 1,
 	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
 	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},

machine/PB_2132.h

@@ -2,5 +2,6 @@
 #define _MACHINE_PB_2132_H_
 
 #define MACHINE_MODEL "PB-2132"
+#define MACHINE_CHIPSET RTL8373
 
 #endif

machine/PCB_K0402WS_V1.c

@@ -1,10 +1,7 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
+	MACHINE_COMMON_SETTING,
-	.isRTL8373 = 0,
-	.min_port = 3,
-	.max_port = 8,
 	.n_sfp = 2,
 	.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
 	.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},

machine/PCB_K0402WS_V1.h

@@ -2,5 +2,6 @@
 #define _MACHINE_PCB_K0402WS_V1_H_
 
 #define MACHINE_MODEL "PCB-K0402WS-V1.0"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/PCB_K0402WS_V2.c

@@ -1,10 +1,7 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-    .machine_name = MACHINE_MODEL,
+	MACHINE_COMMON_SETTING,
-    .isRTL8373 = 0,
-    .min_port = 3,
-    .max_port = 8,
     .n_sfp = 2,
     .log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
     .phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},

machine/PCB_K0402WS_V2.h

@@ -2,5 +2,6 @@
 #define _MACHINE_PCB_K0402WS_V2_H_
 
 #define MACHINE_MODEL "PCB-K0402WS-V2.0"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/PCB_K0402WS_V2_init.c

@@ -0,0 +1 @@
+KP_9000_6XH_X2_init.c

machine/PCB_K0402WS_V3.h

@@ -2,5 +2,6 @@
 #define _MACHINE_PCB_K0402WS_V3_H_
 
 #define MACHINE_MODEL "PCB-K0402WS-V3.0"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/PCB_K0402WS_V3_init.c

@@ -0,0 +1 @@
+KP_9000_6XH_X2_init.c

machine/PCB_SWTG018AS_V2_1_0.c

@@ -2,11 +2,8 @@
 
 
 __code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
+	MACHINE_COMMON_SETTING,
-	.isRTL8373 = 1,
 	.mac_flash_offset = 0x1FC000,
-	.min_port = 0,
-	.max_port = 8,
 	.n_sfp = 1,
 	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
 	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},

machine/PCB_SWTG018AS_V2_1_0.h

@@ -2,5 +2,6 @@
 #define _MACHINE_PCB_SWTG018AS_V2_1_0_H_
 
 #define MACHINE_MODEL "SWTGW218AS (SWTG018AS-V2.1.0)"
+#define MACHINE_CHIPSET RTL8373
 
 #endif

machine/PCB_SWTG018AS_V2_1_0_init.c

@@ -0,0 +1,18 @@
+#include "machine_init_defs.h"
+
+static __code const struct { uint16_t reg; uint32_t val; } custom_init_regs[] = {
+	{ RTL837X_REG_LED3_0_SET1,   0x00100000UL },
+	{ RTL837X_REG_LED1_0_SET1,   0x01400155UL },
+	{ RTL837X_REG_LED1_0_SET0,   0x01740141UL },
+	{ RTL837X_REG_LED_GLB_IO_EN, 0x7f24977fUL },
+	{ RTL837X_PIN_MUX_0,         0x20db6880UL },
+};
+
+void machine_custom_init(void) __banked
+{
+	uint8_t i;
+	// REG_SET is a multi-statement macro without a do-while wrapper: braces required
+	for (i = 0; i < sizeof(custom_init_regs) / sizeof(custom_init_regs[0]); i++) {
+		REG_SET(custom_init_regs[i].reg, custom_init_regs[i].val);
+	}
+}

machine/PCB_SWTG024AS_A_2_0_1.c

@@ -1,10 +1,7 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-    .machine_name = MACHINE_MODEL,
+    MACHINE_COMMON_SETTING,
-    .isRTL8373 = 0,
-    .min_port = 3,
-    .max_port = 8,
     .n_sfp = 2,
     .log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
     .phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},

machine/PCB_SWTG024AS_A_2_0_1.h

@@ -2,5 +2,6 @@
 #define _MACHINE_PCB_SWTG024AS_A_2_0_1_H_
 
 #define MACHINE_MODEL "PCB-SWTG024AS-A-2.0.1"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/PCB_SWTG024AS_A_2_0_1_init.c

@@ -0,0 +1,9 @@
+#include "machine_init_defs.h"
+
+void machine_custom_init(void) __banked
+{
+	reg_bit_set(RTL837X_REG_LED_GLB_IO_EN, 6);
+	reg_bit_set(RTL837X_REG_LED_MODE, 17);
+	reg_bit_clear(RTL837X_REG_LED_MODE, 9);
+	reg_bit_clear(RTL837X_REG_LED_MODE, 7);
+}

machine/POE_2G080110GS.c

@@ -1,10 +1,7 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
+	MACHINE_COMMON_SETTING,
-	.isRTL8373 = 1,
-	.min_port = 0,
-	.max_port = 8,
 	.n_sfp = 1,
 	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
 	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},

machine/POE_2G080110GS.h

@@ -2,5 +2,6 @@
 #define _MACHINE_POE_2G080110GS_H_
 
 #define MACHINE_MODEL "MokerLink POE-2G080110GS"
+#define MACHINE_CHIPSET RTL8373
 
 #endif

machine/SIRIVISION_S25G2206FP_V1_1.c

@@ -1,10 +1,7 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
+	MACHINE_COMMON_SETTING,
-	.isRTL8373 = 0,
-	.min_port = 3,
-	.max_port = 8,
 	.n_sfp = 2,
 	.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
 	.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},

machine/SIRIVISION_S25G2206FP_V1_1.h

@@ -2,5 +2,6 @@
 #define _MACHINE_SIRIVISION_S25G2206FP_V1_1_H_
 
 #define MACHINE_MODEL "SIRIVISION S25G2206FP V1.1"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/SKS3200_8E1X.h

@@ -2,6 +2,7 @@
 #define _MACHINE_SKS3200_8E1X_H_
 
 #define MACHINE_MODEL "XikeStor SKS3200-8E1X"
+#define MACHINE_CHIPSET RTL8373
 
 #endif
 

machine/STEAMEMO_IG204_V1.c

@@ -1,10 +1,7 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
+	MACHINE_COMMON_SETTING,
-	.isRTL8373 = 0,
-	.min_port = 3,
-	.max_port = 8,
 	.n_sfp = 2,
 	.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
 	.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},

machine/STEAMEMO_IG204_V1.h

@@ -2,5 +2,6 @@
 #define _MACHINE_STEAMEMO_IG204_V1_H_
 
 #define MACHINE_MODEL "Steamemo IG204 V1"
+#define MACHINE_CHIPSET RTL8372
 
 #endif

machine/SWGT024_V2_0_MANAGED.c

@@ -1,10 +1,7 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
+	MACHINE_COMMON_SETTING,
-	.isRTL8373 = 0,
-	.min_port = 3,
-	.max_port = 8,
 	.n_sfp = 2,
 	.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
 	.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},

machine/SWGT024_V2_0_MANAGED.h

@@ -2,5 +2,6 @@
 #define _MACHINE_SWGT024_V2_0_MANAGED_H_
 
 #define MACHINE_MODEL "SWGT024 V2.0 Managed"
+#define MACHINE_CHIPSET RTL8372
 
 #endif