diff --git a/doc/devices/SWTG024AS-A-V2.0.1_4C_2SFP.md b/doc/devices/SWTG024AS-A-V2.0.1_4C_2SFP.md index ddb3b1fc..ca1a9ec9 100644 --- a/doc/devices/SWTG024AS-A-V2.0.1_4C_2SFP.md +++ b/doc/devices/SWTG024AS-A-V2.0.1_4C_2SFP.md @@ -5,6 +5,7 @@ It is highly similar to SWTG024AS-V2.0, with the only difference being the GPIO |Brand |Type |Managed|PCB |Flash |Chip RTL| |---------|--------------|-------|------------------------------|----------------|--------| | Horaco | ZX-SG4T2 | No | PCB-SWTG024AS-A-V2.0.1_19650 | 512K (P25D40SH)| 8372N | +| Horaco | HC-SWTG124AS | Yes | PCB-SWTG024AS-A-V2.0.1_19650 | 2M (W25Q16JV)| 8372N | | Horaco | HC-SWTG124AS | Yes | PCB-SWTG024AS-A-V2.0.1 | 2M (W25Q16JV)| 8372N | | GoodTop | GT-ST024M | Yes | PCB-SWTG024AS-A-V2.0.1 | 2M | 8372N | @@ -35,6 +36,8 @@ Bottom +On Horaco HC-SWTG124AS with board PCB-SWTG024AS-A-V2.0.1_19650 the reset button is soldered at `SW1` (on the top left). + ### J1, serial console | `J1` pin | Signal | diff --git a/doc/supported_devices.md b/doc/supported_devices.md index 08245ea5..b2695350 100644 --- a/doc/supported_devices.md +++ b/doc/supported_devices.md @@ -18,6 +18,7 @@ The following devices have been tested and are fully working: | hongyavision | HYWS-SGT0204S | No | [2G5F4_10G2_V1.01](devices/2G5F4_10G2_V1.01.md) | 0.5M | 4 + 2 | | hongyavision | LG-SG5T1 | No | [PCB-SWTG024AS-V2.0_16895](devices/SWTG024AS-V2.0.md) | 0.5M | 5 + 1 | | Horaco | HC-SWTG124AS | Yes | [SWTG024AS-A-V2.0.1](devices/SWTG024AS-A-V2.0.1_4C_2SFP.md) | 2M | 4 + 2 | +| Horaco | HC-SWTG124AS | Yes | [SWTG024AS-A-V2.0.1_19650_4C_2SFP](devices/SWTG024AS-A-V2.0.1_4C_2SFP.md) | 2M | 4 + 2 | | Horaco | HC-SWTGW215AS | Yes | [SWTG024AS-A-V2.0.1_19650 5C 1SFP](devices/SWTG024AS-A-V2.0.1_5C_1SFP.md) | ? | 5 + 1 | | Horaco | HC-SWTGW218AS | Yes | [SWTG018AS-A V2.0](devices/SWTG018AS_A_V2_0.md) | | 8 + 1 | | Horaco | HC-SWTGW218AS | Yes | [SWTG118AS-V2.1](devices/SWTGW218AS.md) | 2M | 8 + 1 |