Add support for Goalake IG108 / Netcore GS9 / PB-2132 PCB

Support For Goalake IG108 and Netcore GS9 based on same PCB = PB-2132

SFP port untested

doc/devices/PB-2132.md

@@ -0,0 +1,53 @@
+# IG108
+
+Following is documentation for unmanaged switch marked as `IG108`.
+
+Original software is running UART on 9600 baud rate.
+
+Using SPI clamp in-board is the only method for initial installation.
+
+### Brands
+
+| Brand   | Type       | Managed | PCB        | Flash       | Chip RTL      |
+|---------|------------|---------|------------|-------------|---------------|
+| Goalake | IG108      | No      | PB-2132    | cFeon Q32A  | 8373N + 8224N |
+| Netcore | GS9        | No      | PB-2132    | cFeon Q32A  | 8373N + 8224N |
+
+### What works
+
+- All eight 2.5GBASE-T RJ45 ports at 10/100/1000/2500 Mbps
+- SFP port with 1G/2.5G/10G modules
+- LEDs
+
+### PCB overview
+
+**Board markings**
+
+- Top silkscreen: PB-2132
+
+Front Goalake:
+
+<img src="photos/PB-2132/case.jpg" width="600" />
+
+Label Goalake: 
+
+<img src="photos/PB-2132/label.jpg" width="600" />
+
+Top side:
+
+<img src="photos/PB-2132/PCB-top.jpg" width="600" />
+
+Bottom:
+
+<img src="photos/PB-2132/PCB-bottom.jpg" width="600" />
+
+### Serial console
+
+The PCB has unpopulated through-holes near the SFP Port, with description of each pin, works out of the box.
+
+- **Settings**: 115200 baud / 8N1 / 3.3V TTL
+
+### Power supply
+
+Input power is delivered via barell plug, `12V 1A` adapter was provided.
+

doc/supported_devices.md

@@ -34,6 +34,8 @@ The following devices have been tested and are fully working:
 | XikeStor | SKS3200-8E1X    | Yes     | [SWTG118AS-V2.1-17462](devices/SWTGW218AS.md)                             | 2M    | 8 + 1 |
 | Ztyuav   | Z-QWYT0402      | No      | [PCB-K0402WS-V3.0](devices/PCB-K0402WS-V3.0.md)                           |       | 4 + 2 |
 | Lianguo  | HYWS-SGT0108S   | No      | [2G5F_20G_V1.01](devices/HYWS-SGT0108S.md)                                | 0.5M  | 8 + 1 |
+| Goalake  | IG108           | No      | [PB-2132](devices/PB-2132.md)                                             | 4M    | 8 + 1 |
+| Netcore  | GS9             | No      | [PB-2132](devices/PB-2132.md)                                             | 4M    | 8 + 1 |
 
 For KP-9000-6XH-X2 / KP-9000-6XHML-X2 / Mokerlink 2G040210GSM devices, select
 the machine target by PCB revision. The ML/non-ML or managed/unmanaged label