From c15b2d48dabf5a01e8407f97b59537227ff64165 Mon Sep 17 00:00:00 2001 From: d00f <8052722+DrDoof@users.noreply.github.com> Date: Fri, 16 Oct 2026 23:34:02 +0200 Subject: [PATCH] html: call the MAC count column Devices learned The column counts the addresses the switch learns from incoming frames, so "Connected" suggested a connection it does not show. The translations follow the words the L2 tab already uses for learned entries. --- html/app.js | 12 ++++++------ html/index.html | 2 +- 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/html/app.js b/html/app.js index 70ea1556..f8349fae 100644 --- a/html/app.js +++ b/html/app.js @@ -19,7 +19,7 @@ i_built:"Built",i_hw:"Hardware",i_temp:"Temperature",i_flash:"Flash",i_syslog:"S p_state:"State",p_disabled:"disabled",p_up:"up",p_txgb:"TX good / bad",p_rxgb:"RX good / bad", p_pkts:"pkts",p_module:"Module",p_temp:"Temperature",p_vcc:"Vcc",p_txbias:"TX bias",p_txpower:"TX power", p_rxpower:"RX power",p_txfault:"TX fault",p_txdis:"TX disabled",p_rxlos:"RX LOS",p_adv:"Advertising", -pt_title:"Port configuration",pt_conn:"Connected",pt_speed:"Speed",pt_mtu:"MTU", +pt_title:"Port configuration",pt_conn:"Devices learned",pt_speed:"Speed",pt_mtu:"MTU", pt_sfp_note:"SFP speed is set per slot and is not saved in the startup config.", pt_name_err:"Port name: 1-15 characters, no spaces",pt_mtu_err:"MTU must be 64-16383", stp_title:"Spanning tree",stp_h:"RSTP, 802.1w",stp_version:"Version",stp_v_stp:"STP compatible", @@ -138,7 +138,7 @@ i_built:"ビルド日",i_hw:"ハードウェア",i_temp:"温度",i_flash:"フラ p_state:"状態",p_disabled:"無効",p_up:"アップ",p_txgb:"TX 正常 / 異常",p_rxgb:"RX 正常 / 異常", p_pkts:"pkts",p_module:"モジュール",p_temp:"温度",p_vcc:"電圧",p_txbias:"TX バイアス",p_txpower:"TX 電力", p_rxpower:"RX 電力",p_txfault:"TX 障害",p_txdis:"TX 無効",p_rxlos:"RX 信号ロス",p_adv:"アドバタイズ", -pt_title:"ポート設定",pt_conn:"接続デバイス",pt_speed:"速度",pt_mtu:"MTU", +pt_title:"ポート設定",pt_conn:"学習済みデバイス",pt_speed:"速度",pt_mtu:"MTU", pt_sfp_note:"SFP の速度はスロット単位で設定され、起動設定には保存されません。", pt_name_err:"ポート名: 1〜15 文字、空白不可",pt_mtu_err:"MTU は 64〜16383 の範囲で指定してください", stp_title:"スパニングツリー",stp_h:"RSTP, 802.1w",stp_version:"バージョン",stp_v_stp:"STP 互換", @@ -251,7 +251,7 @@ i_built:"构建日期",i_hw:"硬件",i_temp:"温度",i_flash:"Flash",i_syslog:"S p_state:"状态",p_disabled:"已禁用",p_up:"已连接",p_txgb:"TX 正常 / 错误",p_rxgb:"RX 正常 / 错误", p_pkts:"个包",p_module:"模块",p_temp:"温度",p_vcc:"供电电压",p_txbias:"TX 偏置电流",p_txpower:"TX 光功率", p_rxpower:"RX 光功率",p_txfault:"TX 故障",p_txdis:"TX 禁用",p_rxlos:"RX 信号丢失",p_adv:"通告能力", -pt_title:"端口配置",pt_conn:"已连接设备",pt_speed:"速率",pt_mtu:"MTU", +pt_title:"端口配置",pt_conn:"已学习设备",pt_speed:"速率",pt_mtu:"MTU", pt_sfp_note:"SFP 速率按插槽设置，不会保存到启动配置。", pt_name_err:"端口名称: 1-15 个字符，不能包含空格",pt_mtu_err:"MTU 范围为 64-16383", stp_title:"生成树",stp_h:"RSTP, 802.1w",stp_version:"版本",stp_v_stp:"STP 兼容", @@ -364,7 +364,7 @@ i_built:"Compilado",i_hw:"Hardware",i_flash:"Flash",i_syslog:"Syslog", p_state:"Estado",p_disabled:"deshabilitado",p_up:"activo",p_txgb:"TX correctos / erróneos",p_rxgb:"RX correctos / erróneos", p_pkts:"paquetes",p_module:"Módulo",p_temp:"Temperatura",p_vcc:"Vcc",p_txbias:"Polarización TX",p_txpower:"Potencia TX", p_rxpower:"Potencia RX",p_txfault:"Fallo TX",p_txdis:"TX deshabilitado",p_rxlos:"Pérdida RX (LOS)",p_adv:"Anunciado", -pt_title:"Configuración de puerto",pt_conn:"Conectado",pt_speed:"Velocidad",pt_mtu:"MTU", +pt_title:"Configuración de puerto",pt_conn:"Dispositivos aprendidos",pt_speed:"Velocidad",pt_mtu:"MTU", pt_sfp_note:"La velocidad del SFP se ajusta por ranura y no se guarda en la configuración de inicio.", pt_name_err:"Nombre de puerto: 1-15 caracteres, sin espacios",pt_mtu_err:"El MTU debe estar entre 64 y 16383", stp_title:"Árbol de expansión",stp_h:"RSTP, 802.1w",stp_version:"Versión",stp_v_stp:"STP compatible", @@ -476,7 +476,7 @@ i_built:"Compilé le",i_hw:"Matériel",i_temp:"Température",i_flash:"Taille Fla p_state:"Etat",p_disabled:"Inactif",p_up:"Actif",p_txgb:"TX bon / mauvais",p_rxgb:"RX bon / mauvais", p_pkts:"paquets",p_module:"Module",p_temp:"Température",p_vcc:"Vcc",p_txbias:"TX biais",p_txpower:"TX puissance", p_rxpower:"RX puissance",p_txfault:"TX erreur",p_txdis:"TX désactivé",p_rxlos:"RX pertes de signaux",p_adv:"Capacités", -pt_title:"Configuration du port",pt_conn:"Connecté à",pt_speed:"Vitesse",pt_mtu:"MTU", +pt_title:"Configuration du port",pt_conn:"Appareils appris",pt_speed:"Vitesse",pt_mtu:"MTU", pt_sfp_note:"La vitesse SFP est paramétrée pour le port et n'est pas enregistrée dans la configuration de démarrage.", pt_name_err:"Nom du port: 1 à 15 caractères, sans espaces",pt_mtu_err:"MTU doit être comrpis entre 64 et 16383", stp_title:"Arborescence",stp_h:"RSTP, 802.1w",stp_version:"Protocole",stp_v_stp:"Compatible STP", @@ -589,7 +589,7 @@ i_built:"Erstellt",i_hw:"Hardware",i_temp:"Temperatur",i_flash:"Flash",i_syslog: p_state:"Zustand",p_disabled:"deaktiviert",p_up:"verbunden",p_txgb:"TX gut / fehlerhaft",p_rxgb:"RX gut / fehlerhaft", p_pkts:"Pakete",p_module:"Modul",p_temp:"Temperatur",p_vcc:"Vcc",p_txbias:"TX-Bias",p_txpower:"Sendeleistung", p_rxpower:"Empfangsleistung",p_txfault:"TX-Fehler",p_txdis:"TX deaktiviert",p_rxlos:"RX LOS",p_adv:"Angeboten", -pt_title:"Port-Konfiguration",pt_conn:"Verbunden",pt_speed:"Geschwindigkeit",pt_mtu:"MTU", +pt_title:"Port-Konfiguration",pt_conn:"Gelernte Geräte",pt_speed:"Geschwindigkeit",pt_mtu:"MTU", pt_sfp_note:"Die SFP-Geschwindigkeit wird pro Steckplatz gesetzt und nicht in der Startkonfiguration gespeichert.", pt_name_err:"Port-Name: 1-15 Zeichen, keine Leerzeichen",pt_mtu_err:"MTU muss zwischen 64 und 16383 liegen", stp_title:"Spanning Tree",stp_h:"RSTP, 802.1w",stp_version:"Version",stp_v_stp:"STP-kompatibel", diff --git a/html/index.html b/html/index.html index 54ab11d2..bc44bd38 100644 --- a/html/index.html +++ b/html/index.html @@ -237,7 +237,7 @@ button.danger{background:var(--bad);color:#fff;border-color:transparent}

Port configuration

- +
PortNameLinkConnectedSpeedEnabledMTU
PortNameLinkDevices learnedSpeedEnabledMTU

SFP speed is set per slot and is not saved in the startup config.