gitproxy/RTLPlayground
1
0
Fork 0
mirror of https://github.com/logicog/RTLPlayground.git synced 2026-09-02 15:02:51 +08:00
Code Issues Packages Projects Releases Wiki Activity

stp: do not let auto edge undo a loop block

Browse Source 
A port held out of forwarding because a loop was seen on it stops hearing
the frames that justified the hold, so its BPDU age climbs. The auto edge
branch lives inside the same countdown as the hold, reads that age, and
promotes the port back to forwarding after three seconds. The loop opens,
a BPDU comes back, the block is applied again, and the two take turns.

Measured on a looped pair present when the tree came up: twenty cycles in
one window and fifteen in the next, each block followed by a promotion,
still going when the capture ended.

The countdown alone cannot tell a loop hold from an ordinary listen, so
record the hold and leave the port alone while it stands.
This commit is contained in:
d00f
2026-08-31 14:26:05 +02:00
parent 8e9bb56a29
commit bd06f7f5e5
1 changed files with 6 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files
rtl837x_stp.c
+6
View File
@@ -70,6 +70,7 @@ __xdata uint16_t stp_scratch16; /* scratch for status printing only */
__xdata uint16_t port_timers[10]; /* listen-period countdown (0 = not listening) */
__xdata uint16_t port_hello[10]; /* hello TX countdown */
__xdata uint16_t stp_bpdu_age[10]; /* ticks since last BPDU seen on port (saturating) */
__xdata uint8_t stp_loop_held[10]; /* port is out of forwarding because a loop was seen on it */
__xdata uint8_t stp_tx_budget[10]; /* tx hold: BPDUs left in the current second */
__xdata uint8_t stp_tx_count[10]; /* BPDUs actually put on the wire, wraps at 256 */
__xdata uint16_t stp_sec_tick; /* 1 s window for the tx budget */
@@ -309,6 +310,7 @@ static void stp_loop_hold_peer(uint8_t port) __reentrant
stp_pflags[port] &= ~STP_PF_OPEREDGE;
stp_topology_change(port);
}
stp_loop_held[port] = 1;
port_timers[port] = (uint16_t)stp_fwddelay_s * STP_HZ;
}
@@ -624,11 +626,13 @@ void stp_timers(void) __banked
* the designated bridge on that port). */
if (port_timers[stp_i]) {
if (!--port_timers[stp_i]) {
stp_loop_held[stp_i] = 0;
stp_state_set(stp_i, 0b11);
print_string("STP: port forwarding ");
print_port_nl(stp_i);
stp_topology_change(stp_i);
} else if ((stp_pflags[stp_i] & STP_PF_AUTOEDGE)
&& !stp_loop_held[stp_i]
&& stp_bpdu_age[stp_i] > STP_EDGE_DELAY) {
/* Auto edge: nothing talks (R)STP on this port - it is
* host-facing, go to forwarding without the full wait. */
@@ -711,6 +715,7 @@ void stp_setup(void) __banked
sfr_data[0] = sfr_data[1] = sfr_data[2] = sfr_data[3] = 0;
for (stp_i = machine.min_port; stp_i <= machine.max_port; stp_i++) {
stp_pflags[stp_i] &= ~(STP_PF_OPEREDGE | STP_PF_TRIPPED);
stp_loop_held[stp_i] = 0;
stp_bpdu_age[stp_i] = 0;
stp_tx_budget[stp_i] = stp_txhold;
stp_tx_count[stp_i] = 0;
@@ -762,6 +767,7 @@ void stp_off(void) __banked
// States are: 00 disable, 01 blocking, 10 learning, 11 forwarding
sfr_data[3 - (stp_i >> 2)] |= (uint8_t)(0b11 << ((stp_i << 1) & 0x7));
stp_pflags[stp_i] &= ~(STP_PF_OPEREDGE | STP_PF_TRIPPED);
stp_loop_held[stp_i] = 0;
port_timers[stp_i] = 0;
}
sfr_data[1] |= 0x0c; // Do not block the CPU port (bits 3:2 of byte 1 = port 9)