Detect SOC type and use detected SOC type to init the hardware.

Detect the SOC type and variant. RTL8372 vs RTL8373 and also is it as
non-N/N variant of the SOC.
Even if the machine profile is wrong the hardware will be initilised on
the detected type.

machine.h

@@ -38,4 +38,10 @@ typedef struct machine {
 	int8_t reset_pin;
 };
 
+typedef struct machine_runtime
+{
+	uint8_t isRTL8373 : 1;
+	uint8_t isN : 1;
+};
+
 #endif

rtl837x_regs.h

@@ -1,6 +1,7 @@
 #ifndef _RTL837X_REGS_H_
 #define _RTL837X_REGS_H_
 
+#define RTL837X_REG_CHIP_ID		0x0004
 #define RTL837X_REG_CHIP_INFO		0x000c
 #define RTL837X_REG_RESET		0x0024
 #define RESET_SOC_BIT			0

rtlplayground.c

@@ -24,6 +24,7 @@ extern __code const struct machine machine;
 
 extern __xdata uint16_t crc_value;
 __xdata uint8_t crc_testbytes[10];
+__xdata struct machine_runtime machine_detected;
 void crc16(__xdata uint8_t *v) __naked;
 
 // Upload Firmware to 1M
@@ -683,7 +684,7 @@ void sds_config_mac(uint8_t sds, uint8_t mode)
 	case 2:
 		sfr_mask_data(1, 0xfc, 0x02 << 2);
 	}
-	if (machine.isRTL8373) // Set 3rd SERDES Mode to 0x2 for RTL8224
+	if (machine_detected.isRTL8373) // Set 3rd SERDES Mode to 0x2 for RTL8224
 		sfr_mask_data(1, 0xfc, 0x02 << 2);
 	else
 		sfr_data[2] &= 0x03;
@@ -1098,7 +1099,7 @@ void idle(void)
 		print_byte(linkbits_last[2]); print_byte(linkbits_last[3]);
 		print_string(">\n");
 		linkbits_last_p89 = linkbits_p89;
-		if (!machine.isRTL8373 && machine.n_sfp != 2) {
+		if (!machine_detected.isRTL8373 && machine.n_sfp != 2) {
 			uint8_t p5 = sfr_data[2] >> 4;
 			uint8_t p5_last = linkbits_last[2] >> 4;
 			cpy_4(linkbits_last, sfr_data);
@@ -1678,7 +1679,7 @@ void init_smi(void)
 	REG_SET(RTL837X_REG_SMI_MAC_TYPE, machine.n_sfp == 2 ? 0x00005515 : 0x00005555);
 
 	// Configure polling of all PHYs by the MAC to detect link-state changes
-	if (machine.isRTL8373) {
+	if (machine_detected.isRTL8373) {
 		REG_SET(RTL837X_REG_SMI_PORT_POLLING, 0xff);
 	} else {
 		REG_SET(RTL837X_REG_SMI_PORT_POLLING, machine.n_sfp == 2 ? 0xf0 : 0x1f8);
@@ -1689,7 +1690,7 @@ void init_smi(void)
 	reg_write_m(RTL837X_REG_SMI_CTRL);
 	delay(50);
 
-	if (!machine.isRTL8373) {
+	if (!machine_detected.isRTL8373) {
 		// Change I2C addresses for SMI of the non-existent PHYs
 		// r6450:000020e6 R6450-000000e6
 		reg_read_m(RTL837X_REG_SMI_PORT6_9_ADDR);
@@ -1810,18 +1811,28 @@ void bootloader(void)
 	// We have not detected any link
 	linkbits_last[0] = linkbits_last[1] = linkbits_last[2] = linkbits_last[3] = linkbits_last_p89 = 0;
 
-	print_string("Detecting CPU: ");
+	machine_detected.isRTL8373 = 0;
-	reg_read_m(0x4);
+	machine_detected.isN = 0;
-	if (sfr_data[1] == 0x73) { // Register was 0x83730000
+	print_string("Detecting CPU: RTL837");
-		print_string("RTL8373\n");
+	reg_read_m(RTL837X_REG_CHIP_ID);
-		if (!machine.isRTL8373)
+	if (sfr_data[1] == 0x73) { // Register was 0x8373xx00
-			print_string("INCORRECT MACHINE!");
+		machine_detected.isRTL8373 = 1;
-		rtl8224_enable();  // Power on the RTL8224
+		write_char('3');
 	} else {
-		print_string("RTL8372\n");
+		write_char('2');
-		if (machine.isRTL8373)
+	}
+	// Detect non-N/N chip, 0xxxxx70xx
+	if (sfr_data[2] == 0x70) {
+		machine_detected.isN = 1;
+		write_char('N');
+	}
+	write_char('\n');
+	if (machine.isRTL8373 != machine_detected.isRTL8373) {
 		print_string("INCORRECT MACHINE!");
 	}
+	if (machine_detected.isRTL8373) {
+		rtl8224_enable();  // Power on the RTL8224
+	}
 
 	// Print SW version
 	print_sw_version();
@@ -1840,7 +1851,7 @@ void bootloader(void)
 	REG_SET(RTL837X_PIN_MUX_2, 0x0); // Disable pins for ACL
 	init_smi();
 	rtl8373_revision();
-	if (machine.isRTL8373)
+	if (machine_detected.isRTL8373)
 		rtl8373_init();
 	else
 		rtl8372_init();