stp: drop the management failsafe

The window could be armed from the serial console but only ever disarmed
by an HTTP request. save_cmd, which gates arming, is cleared only while
execute_config() replays the startup config, so every interactive command
armed it wherever it was typed, while mgmt_alive, which disarms it, was
written in exactly one place, on HTTP traffic. An operator working
entirely on the serial console therefore lost STP 180 seconds after
enabling it however much they typed, which is what makes the mechanism
impossible to test from a console.

The documentation described the behaviour that was intended rather than
the one that was built, and in both directions: it said a command on the
serial console also confirms, and it said a reboot with STP in the
startup config disables it again three minutes later. Neither held. The
replay path never armed the window at all.

Repairing the asymmetry would have kept a mechanism whose premise is
contested anyway. A watchdog that switches the protection off in response
to silence adds a second failure mode on top of the first: where the
network is misconfigured and STP is the thing holding a storm back,
restoring forwarding removes the last reason management still answers.

Gone with it: the stp failsafe command, the fs and fsT fields of
/stp.json, the input and the tripped banner on the Spanning Tree page,
the two persistence patterns in config.js, the documentation section, and
mgmt_alive itself, which had no other reader.

550 bytes back, 145 of BANK1 and 405 of BANK2, and five of xdata, which
is the four counters and mgmt_alive and nothing else. Built for
SWTGW218AS and KP_9000_6XHML_X2 on sdcc 4.5.0.

rtl837x_stp.h

@@ -27,8 +27,6 @@ extern __xdata uint8_t  stp_maxage_s;	/* max age, 6-40 s (default 20)     */
 extern __xdata uint8_t  stp_fwddelay_s;	/* forward delay, 4-30 s (default 15); our listen period */
 extern __xdata uint8_t  stp_rstp;	/* 1 = RSTP BPDUs (v2), 0 = STP-compatible Config BPDUs (v0) */
 extern __xdata uint8_t  stp_txhold;	/* max BPDUs per port per second (default 6) */
-extern __xdata uint8_t  stp_failsafe_s;	/* mgmt watchdog, seconds (0 = off) */
-extern __xdata uint8_t  stp_failsafe_tripped;
 
 /* Per-port config/status flags (stp_pflags[]) */
 #define STP_PF_ENABLED	0x01	/* port participates in STP (default on)     */