refactoring machine.c, two files per device

machine/KP_9000_6XH_X2.c

@@ -0,0 +1,48 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 0,
+	.min_port = 3,
+	.max_port = 8,
+	.n_sfp = 2,
+	.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
+	.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
+	.is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
+
+	// Left SFP port
+	.sfp_port[0].pin_detect = GPIO38,
+	.sfp_port[0].pin_los = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+
+	// Right SFP port
+	.sfp_port[1].pin_detect = GPIO37,
+	.sfp_port[1].pin_los = GPIO_NA,
+	.sfp_port[1].sds = 0,
+	.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
+
+	.reset_pin = GPIO48_I2C_SCL1,   // Button-Switch is unpopulated on PCB, but can be added manually (hole in case is already there)
+	.high_leds = { .mux =  LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
+	.led_sets = {
+			{
+				LEDS_2G5 | LEDS_LINK,												// Left LED (Amber)
+				LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,   // Right LED (Green)
+				0,
+				0
+			},
+			{
+				LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+				0,
+				0,
+				0
+			},
+	 },
+	.led_mux_custom = 1,
+	.led_mux = {
+				0x00,0x01,0x04,0x05,0x08,0x09,0x0c,0x3f,0x0d,0x10,
+				0x11,0x0e,0x14,0x11,0x12,0x15,0x15,0x16,0x18,0x19,
+				0x1a,0x19,0x1d,0x1e,0x1c,0x1d,0x20,0x21
+		},
+	};