Merge pull request #221 from feelfree69/kp9000

Adding Keeplink KP-9000-6XH-X2

doc/devices/KP-9000-6XH-X2.md

@@ -0,0 +1,57 @@
+# Keeplink KP-9000-6XH-X2
+
+Following is documentation for unmanaged switch marked as `KP-9000-6XH-X2`.
+
+Using SPI clamp in-board is the only method for initial installation.
+
+### Label specifications
+
+- **Name**: 4X 2.5G RJ45 Port + 2 X 10G SFP+ Port  
+- **Model**: KP-9000-6XH-X2  
+- **Ports**:  
+  - 4 × RJ45: 10/100/1000/2500 Mbps  
+  - 2 × SFP+: 1000 / 2500 / 10000 Mbps  
+
+### What works
+
+- All four 2.5GBASE-T RJ45 ports at 10/100/1000/2500 Mbps
+- SFP port with 10G modules 
+- LEDs
+- untested due to missing Hardware: SFP+ ports equipped with 1G or 2.5G SFPs.
+
+### Hardware overview
+
+Front side:
+
+<img src="photos/2M-PCB43-V2.1-unmanaged/KP-9000-6XH-X2-front.jpg" width="600" />
+
+Label:
+
+<img src="photos/2M-PCB43-V2.1-unmanaged/KP-9000-6XH-X2-label.jpg" width="600" />
+
+
+
+### PCB overview
+
+**Board markings**  
+- Top silkscreen: 2M-PCB43-V2.1
+
+Top side
+
+<img src="photos/2M-PCB43-V2.1-unmanaged/2M-PCB43-V2.1-top.jpg" width="600" />
+
+Bottom
+
+<img src="photos/2M-PCB43-V2.1-unmanaged/2M-PCB43-V2.1-bottom.jpg" width="600" />
+
+## Reset Button
+
+There's an unpopulated Reset button on the front left side of the PCB.
+It can easily be soldered, you'll need an 4.5mmx4.5mm 90° button switch with a 3-pin footprint.
+I got mine here: https://de.aliexpress.com/item/1005007295346702.html
+The front case has already the hole in the metal case, you just have to punch a hole through the foil.
+
+## Power supply
+
+Input power is delivered via barell plug, `12V 1A` adapter was provided.
+

machine.c

@@ -73,6 +73,58 @@ __code const struct machine machine = {
 
 void machine_custom_init(void) { }
 
+#elif defined MACHINE_KP_9000_6XH_X2
+__code const struct machine machine = {
+	.machine_name = "keepLink KP-9000-6XH-X2",
+	.isRTL8373 = 0,
+	.min_port = 3,
+	.max_port = 8,
+	.n_sfp = 2,
+	.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
+	.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
+	.is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
+
+	// Left SFP port
+	.sfp_port[0].pin_detect = GPIO38,
+	.sfp_port[0].pin_los = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c =  { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 },
+
+	// Right SFP port
+	.sfp_port[1].pin_detect = GPIO37,
+	.sfp_port[1].pin_los = GPIO_NA,
+	.sfp_port[1].sds = 0,
+	.sfp_port[1].i2c = { .sda = GPIO41_I2C_SDA3_MDIO1, .scl = GPIO40_I2C_SCL3_MDC1 },
+
+	.reset_pin = GPIO48_I2C_SCL1,   // Button-Switch is unpopulated on PCB, but can be added manually (hole in case is already there)
+	.high_leds = { .mux =  LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
+	.led_sets = {
+			{
+				LEDS_2G5 | LEDS_LINK,												// Left LED (Amber)
+				LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,   // Right LED (Green)
+				0,
+				0
+			},
+			{
+				LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+				0,
+				0,
+				0
+			},
+	 },
+	.led_mux_custom = 1,
+	.led_mux = {
+				0x00,0x01,0x04,0x05,0x08,0x09,0x0c,0x3f,0x0d,0x10,
+				0x11,0x0e,0x14,0x11,0x12,0x15,0x15,0x16,0x18,0x19,
+				0x1a,0x19,0x1d,0x1e,0x1c,0x1d,0x20,0x21
+		},
+	};
+
+void machine_custom_init(void) {
+	reg_bit_set(RTL837X_REG_LED_GLB_IO_EN, 6);
+}
+
 #elif defined MACHINE_KP_9000_9XH_X_EU
 __code const struct machine machine = {
 	.machine_name = "keepLink KP-9000-9XH-X-EU",

machine.h

@@ -8,6 +8,7 @@
  */
 // #define MACHINE_KP_9000_6XHML_X2
 // #define MACHINE_KP_9000_6XH_X
+// #define MACHINE_KP_9000_6XH_X2
 // #define MACHINE_KP_9000_9XH_X_EU
 // #define MACHINE_KP_9000_9XHML_X_V2_2
 // #define MACHINE_KP_9000_9XHML_X_V3_1