diff --git a/machine/DEFAULT_8C_1SFP.c b/machine/DEFAULT_8C_1SFP.c
deleted file mode 100644
index 2a923596..00000000
--- a/machine/DEFAULT_8C_1SFP.c
+++ /dev/null
@@ -1,25 +0,0 @@
-#include "machine_defs.h"
-
-__code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
-	.isRTL8373 = 1,
-	.min_port = 0,
-	.max_port = 8,
-	.n_sfp = 1,
-	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
-	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
-	.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
-	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
-	.sfp_port[0].pin_los = GPIO37,
-	.sfp_port[0].pin_tx_disable = GPIO_NA,
-	.sfp_port[0].sds = 1,
-	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
-	.reset_pin = GPIO_NA,
-	.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
-	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 0},
-	.led_sets = { { LEDS_2G5 | LEDS_TWO_PAIR_1G | LEDS_1G | LEDS_500M | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G | LEDS_TWO_PAIR_5G | LEDS_5G | LEDS_TWO_PAIR_2G5,
-			LEDS_2G5 | LEDS_LINK,
-			LEDS_1G | LEDS_LINK,
-			LEDS_2G5 | LEDS_LINK | LEDS_ACT },
-		    },
-};
diff --git a/machine/DEFAULT_8C_1SFP.c b/machine/DEFAULT_8C_1SFP.c
new file mode 120000
index 00000000..f00039af
--- /dev/null
+++ b/machine/DEFAULT_8C_1SFP.c
@@ -0,0 +1 @@
+KP_9000_9XH_X_EU.c
\ No newline at end of file
diff --git a/machine/FNS1200P.c b/machine/FNS1200P.c
deleted file mode 100644
index 71334029..00000000
--- a/machine/FNS1200P.c
+++ /dev/null
@@ -1,55 +0,0 @@
-#include "machine_defs.h"
-
-__code const struct machine machine = {
-    .machine_name = MACHINE_MODEL,
-    .isRTL8373 = 0,
-    .min_port = 3,
-    .max_port = 8,
-    .n_sfp = 2,
-    .log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
-    .phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
-    .is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
-
-    /* Left SFP (logical 8, SDS1): GPIO30=ModAbs, GPIO37=RX_LOS */
-    .sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
-    .sfp_port[0].pin_los = GPIO37,
-    .sfp_port[0].pin_tx_disable = GPIO_NA,
-    .sfp_port[0].sds = 1,
-    .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
-
-    /* Right SFP (logical 3, SDS0): GPIO50=ModAbs, GPIO51=RX_LOS */
-    .sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
-    .sfp_port[1].pin_los = GPIO51_I2C_SDA2_UART1_RX,
-    .sfp_port[1].pin_tx_disable = GPIO_NA,
-    .sfp_port[1].sds = 0,
-    .sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
-
-    .reset_pin = GPIO_NA,
-
-    .high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
-
-    /* Copper ports use SET0; SFP ports use SET1 */
-    .port_led_set = {0, 0, 0, 1, 0, 0, 0, 0, 1},
-
-    .led_sets = {
-        {   /* SET0: copper — LED0=amber (2.5G), LED2=green (1G/100M/10M) */
-            LEDS_2G5 | LEDS_LINK | LEDS_ACT,
-            0,
-            LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
-            0
-        },
-        {   /* SET1: SFP — all speeds link/act */
-            LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
-            0,
-            0, 0
-        },
-    },
-
-    .led_mux_custom = 1,
-    .led_mux = {
-        0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f,  /* GPIO0-7: unused */
-        0x0f, 0x0c, 0x0d, 0x0e, 0x10, 0x11, 0x12,          /* GPIO8-14 */
-        0x14, 0x15, 0x16, 0x18, 0x19, 0x1a,                 /* GPIO15-20 */
-        0x1c, 0x1d, 0x1e, 0x20, 0x21, 0x22, 0x23            /* GPIO21-27 */
-    },
-};
diff --git a/machine/FNS1200P.c b/machine/FNS1200P.c
new file mode 120000
index 00000000..c836c871
--- /dev/null
+++ b/machine/FNS1200P.c
@@ -0,0 +1 @@
+PCB_K0402WS_V2.c
\ No newline at end of file
diff --git a/machine/HASIVO_S1100WP_8GT_1SX_SE.c b/machine/HASIVO_S1100WP_8GT_1SX_SE.c
deleted file mode 100644
index 7500ba94..00000000
--- a/machine/HASIVO_S1100WP_8GT_1SX_SE.c
+++ /dev/null
@@ -1,32 +0,0 @@
-#include "machine_defs.h"
-
-__code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
-	.isRTL8373 = 1,
-	.mac_flash_offset = 0x1FC000,
-	.min_port = 0,
-	.max_port = 8,
-	.n_sfp = 1,
-	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
-	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
-	.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
-	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
-	.sfp_port[0].pin_los = GPIO37,
-	.sfp_port[0].pin_tx_disable = GPIO_NA,
-	.sfp_port[0].sds = 1,
-	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
-	.reset_pin = GPIO54_ACL_BIT2_EN,
-	.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
-	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
-	.led_sets = { { LEDS_2G5 | LEDS_LINK | LEDS_ACT, // Green LED (right)
-					0,
-					LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, // Amber LED (left)
-					0
-				  },
-				  { LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT, // SFP LED
-					0, 
-					0,
-					0
-				  },
-				},
-};
diff --git a/machine/HASIVO_S1100WP_8GT_1SX_SE.c b/machine/HASIVO_S1100WP_8GT_1SX_SE.c
new file mode 120000
index 00000000..1fc0cdb2
--- /dev/null
+++ b/machine/HASIVO_S1100WP_8GT_1SX_SE.c
@@ -0,0 +1 @@
+SWTGW218AS.c
\ No newline at end of file
diff --git a/machine/PCB_K0402WS_V2.c b/machine/PCB_K0402WS_V2.c
index c37e6201..71334029 100644
--- a/machine/PCB_K0402WS_V2.c
+++ b/machine/PCB_K0402WS_V2.c
@@ -1,7 +1,7 @@
 #include "machine_defs.h"
 
 __code const struct machine machine = {
-	.machine_name = MACHINE_MODEL,
+    .machine_name = MACHINE_MODEL,
     .isRTL8373 = 0,
     .min_port = 3,
     .max_port = 8,
diff --git a/machine/SKS3200_8E1X.c b/machine/SKS3200_8E1X.c
new file mode 120000
index 00000000..2eb54be2
--- /dev/null
+++ b/machine/SKS3200_8E1X.c
@@ -0,0 +1 @@
+PCB_SWTG018AS_V2_1_0.c
\ No newline at end of file
diff --git a/machine/SKS3200_8E1X.h b/machine/SKS3200_8E1X.h
new file mode 100644
index 00000000..e644baf4
--- /dev/null
+++ b/machine/SKS3200_8E1X.h
@@ -0,0 +1,7 @@
+#ifndef _MACHINE_SKS3200_8E1X_H_
+#define _MACHINE_SKS3200_8E1X_H_
+
+#define MACHINE_MODEL "XikeStor SKS3200-8E1X"
+
+#endif
+