Add initial IGMP handling via ASIC

Makefile

@@ -10,7 +10,7 @@ SUBDIRSCLEAN=$(addsuffix clean,$(SUBDIRS))
 
 all: $(SUBDIRS) rtlplayground.bin
 
-SRCS = rtlplayground.c rtl837x_flash.c rtl837x_phy.c rtl837x_port.c cmd_parser.c html_data.c
+SRCS = rtlplayground.c rtl837x_flash.c rtl837x_phy.c rtl837x_port.c cmd_parser.c html_data.c rtl837x_igmp.c
 OBJS = ${SRCS:.c=.rel}
 OBJS += uip/timer.rel uip/uip-fw.rel uip/uip-neighbor.rel uip/uip-split.rel uip/uip.rel uip/uip_arp.rel uip/uiplib.rel httpd/httpd.rel httpd/page_impl.rel
 

rtl837x_igmp.c

@@ -0,0 +1,57 @@
+/*
+ * This is a driver implementation for the IGMP features for the RTL827x platform
+ * This code is in the Public Domain
+ */
+
+// #define REGDBG
+// #define DEBUG
+
+#include <stdint.h>
+#include "rtl837x_common.h"
+#include "rtl837x_sfr.h"
+#include "rtl837x_regs.h"
+#include "rtl837x_igmp.h"
+
+extern __xdata uint8_t minPort;
+extern __xdata uint8_t maxPort;
+extern __xdata uint8_t nSFPPorts;
+extern __xdata uint8_t cpuPort;
+extern __xdata uint8_t isRTL8373;
+
+void igmp_setup(void) __banked
+{
+	uint8_t i;
+
+	// For now, forward all unkown MC pkts (2 bits per port. 00: flood via floodmask, 01: drop, 10: trap, 11: to rport)
+	REG_SET(RTL837X_MC_LOOKUPMISS_ACTIONS, 0x00000000); //0x4f78
+	// Define ports where unknown MC addresses are flooded to:
+	if (isRTL8373) {
+		REG_SET(RTL837X_MC_FLOODMASK, PMASK_9);	// R5368-000001f8
+	} else {
+		REG_SET(RTL837X_MC_FLOODMASK, PMASK_6);
+	}
+
+	// Enable lookup of IPv4 MC addresses in table
+	reg_bit_set(RTL837X_L2_CTRL, 3); // 0x5350
+
+	// Configure per-port IGMP configuration, bits 0-10 enable MC protocol snooping,
+	// bits 16-24 configure max MC group used by that port. For now all protocols are flooded (01)
+	for (i = minPort; i <= maxPort; i++)
+		REG_SET(RTL837X_IGMP_PORT_CFG + (i << 2), 0x00ff7c15); 
+}
+
+
+void igmp_enable(void) __banked
+{
+	uint8_t i;
+
+	REG_SET(0x50bc, 00010007); // Trap control?
+
+	// Drop unknown MC messages
+	REG_SET(RTL837X_MC_LOOKUPMISS_ACTIONS, 0x00015540); //0x4f78
+
+	// Configure per-port IGMP configuration, bits 0-10 enable MC protocol snooping,
+	// bits 16-24 configure max MC group used by that port. Trap to CPU (10)
+	for (i = minPort; i <= maxPort; i++)
+		REG_SET(RTL837X_IGMP_PORT_CFG + (i << 2), 0x00ff7c2a); // 0x00ff7000: Handling by ASIC (00)
+}

rtl837x_igmp.h

@@ -0,0 +1,9 @@
+#ifndef _RTL837X_IGMP_H_
+#define _RTL837X_IGMP_H_
+
+#include <stdint.h>
+
+void igmp_setup(void) __banked;
+void igmp_enable(void) __banked;
+
+#endif

rtl837x_regs.h

@@ -143,6 +143,7 @@
  */
 #define RTL837X_MC_LOOKUPMISS_ACTIONS	0x4f78
 #define RTL837X_IGMP_PORT_CFG		0x52a0
+#define RTL837X_MC_FLOODMASK		0x5368
 
 
 #ifdef REGDBG