gitproxy/RTLPlayground
1
0 Fork 0
mirror of https://github.com/logicog/RTLPlayground.git synced 2026-10-29 17:54:14 +08:00
Code Issues Packages Projects Releases Wiki Activity

Merge pull request #439 from vDorst/feat_i2c_precompute

Browse Source 
I2CBUS: Calculate I2C-settings as compiletime instead at runtime.
This commit is contained in:
René van Dorst authored and GitHub committed 2026-09-21 15:30:56 +02:00
2 parents f0efb84abb ce11790a0d
commit 88454ec7d7
6 files changed
+74 -102
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

boot.c
+5 -7
View File
@@ -397,10 +397,12 @@ void setup_i2c(void) __banked
// HW Control register, enable I2C depending on PIN configuration // HW Control register, enable I2C depending on PIN configuration
reg_read_m(RTL837X_PIN_MUX_1); reg_read_m(RTL837X_PIN_MUX_1);
for (uint8_t sfp = 0; sfp < machine.n_sfp; sfp++) { for (uint8_t sfp = 0; sfp < machine.n_sfp; sfp++) {
const uint8_t scl_bus = i2c_bus_from_scl_pin(machine.sfp_port[sfp].i2c.scl); uint8_t i2c = machine.sfp_port[sfp].i2c;
const uint8_t sda_bus = i2c_bus_from_sda_pin(machine.sfp_port[sfp].i2c.sda); uint8_t scl_bus = (i2c >> RTL837X_REG_I2C_SCL_SHIFT) & RTL837X_REG_I2C_SCL_MASK;
uint8_t sda_bus = (i2c >> RTL837X_REG_I2C_SDA_SHIFT) & RTL837X_REG_I2C_SDA_MASK;
print_string("Configuring I2C for SFP idx="); print_byte(sfp); print_string(" SCL="); print_byte(scl_bus); print_string(", SDA="); print_byte(sda_bus); write_char('\n'); print_string("Configuring I2C for SFP idx="); print_byte(sfp); print_string(" SCL="); print_byte(scl_bus); print_string(", SDA="); print_byte(sda_bus); write_char('\n');
switch (scl_bus) { // `& RTL837X_REG_I2C_SCL_MASK` is needed to silens a compiler warning 110.
switch (scl_bus & RTL837X_REG_I2C_SCL_MASK) {
case 3: case 3:
// Bit 5-6 0b10 -> SCL (implies enabled SDA on bus 3) // Bit 5-6 0b10 -> SCL (implies enabled SDA on bus 3)
sfr_mask_data(0, 0x60, 0x40); sfr_mask_data(0, 0x60, 0x40);
@@ -419,8 +421,6 @@ void setup_i2c(void) __banked
sfr_mask_data(0, 0x80, 0x80); sfr_mask_data(0, 0x80, 0x80);
sfr_mask_data(1, 0x01, 0x00); sfr_mask_data(1, 0x01, 0x00);
break; break;
default:
print_string("Invalid SCL bus number: "); print_byte(scl_bus); write_char('\n');
} }
switch (sda_bus) { switch (sda_bus) {
@@ -444,8 +444,6 @@ void setup_i2c(void) __banked
// Bit 9-10 0b01 -> SDA // Bit 9-10 0b01 -> SDA
sfr_mask_data(1, 0x06, 0x02); sfr_mask_data(1, 0x06, 0x02);
break; break;
default:
print_string("Invalid SDA bus number: "); print_byte(sda_bus); write_char('\n');
} }
} }
reg_write_m(RTL837X_PIN_MUX_1); reg_write_m(RTL837X_PIN_MUX_1);
machine.c
+63 -47
View File
@@ -5,6 +5,29 @@
#include "rtl837x_regs.h" #include "rtl837x_regs.h"
#include "rtl837x_common.h" #include "rtl837x_common.h"
#define I2CBUS_INVALID (7)
// This is a MACRO to check if I2C_BUS_FROM_SDA_PIN or I2C_BUS_FROM_SCL_PIN don't return I2CBUS_INVALID.
// When I2CBUS_INVALID is returned, compiler stops with "machine.c:<line>: error 176: sizeof applied to an incomplete type"
#define I2CBUS_VALID(bus) (0 * sizeof(char[(bus) != I2CBUS_INVALID ? 1 : 0]))
#define I2CBUS(sda, scl) \
((uint8_t)((I2C_BUS_FROM_SCL_PIN(scl) << RTL837X_REG_I2C_SCL_SHIFT) | \
(I2C_BUS_FROM_SDA_PIN(sda) << RTL837X_REG_I2C_SDA_SHIFT) | \
I2CBUS_VALID(I2C_BUS_FROM_SCL_PIN(scl)) | \
I2CBUS_VALID(I2C_BUS_FROM_SDA_PIN(sda))))
#define I2C_BUS_FROM_SDA_PIN(sda_pin) \
((sda_pin) == GPIO47_I2C_SDA0 ? 0 : \
(sda_pin) == GPIO49_I2C_SDA1 ? 1 : \
(sda_pin) == GPIO51_I2C_SDA2_UART1_RX ? 2 : \
(sda_pin) == GPIO41_I2C_SDA3_MDIO1 ? 3 : \
(sda_pin) == GPIO39_I2C_SDA4 ? 4 : I2CBUS_INVALID)
#define I2C_BUS_FROM_SCL_PIN(scl_pin) \
((scl_pin) == GPIO46_I2C_SCL0 ? 0 : \
(scl_pin) == GPIO48_I2C_SCL1 ? 1 : \
(scl_pin) == GPIO50_I2C_SCL2_UART1_TX ? 2 : \
(scl_pin) == GPIO40_I2C_SCL3_MDC1 ? 3 : I2CBUS_INVALID)
#if defined(MACHINE_KP_9000_6XHML_X2) || \ #if defined(MACHINE_KP_9000_6XHML_X2) || \
defined(MACHINE_KP_9000_6XH_X2_V1_1) || \ defined(MACHINE_KP_9000_6XH_X2_V1_1) || \
defined(MACHINE_KP_9000_6XHML_X2_V1_1) || \ defined(MACHINE_KP_9000_6XHML_X2_V1_1) || \
@@ -34,13 +57,13 @@ __code const struct machine machine = {
.sfp_port[0].pin_los = GPIO10_LED10, .sfp_port[0].pin_los = GPIO10_LED10,
.sfp_port[0].pin_tx_disable = GPIO_NA, .sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 0, .sfp_port[0].sds = 0,
.sfp_port[0].i2c = { .sda = GPIO41_I2C_SDA3_MDIO1, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[0].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
// Right SFP port (6) // Right SFP port (6)
.sfp_port[1].pin_detect = GPIO30_ACL_BIT3_EN, .sfp_port[1].pin_detect = GPIO30_ACL_BIT3_EN,
.sfp_port[1].pin_los = GPIO37, .sfp_port[1].pin_los = GPIO37,
.sfp_port[1].pin_tx_disable = GPIO_NA, .sfp_port[1].pin_tx_disable = GPIO_NA,
.sfp_port[1].sds = 1, .sfp_port[1].sds = 1,
.sfp_port[1].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[1].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO54_ACL_BIT2_EN, .reset_pin = GPIO54_ACL_BIT2_EN,
.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 }, .high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 0}, .port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 0},
@@ -70,7 +93,7 @@ __code const struct machine machine = {
.sfp_port[0].pin_los = GPIO37, .sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA, .sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA, .reset_pin = GPIO_NA,
/* Conditions for LED on: /* Conditions for LED on:
* dual led orange: ledset_0 & ledset_2 * dual led orange: ledset_0 & ledset_2
@@ -105,13 +128,13 @@ __code const struct machine machine = {
.sfp_port[0].pin_detect = GPIO38, .sfp_port[0].pin_detect = GPIO38,
.sfp_port[0].pin_los = GPIO_NA, .sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
// Right SFP port // Right SFP port
.sfp_port[1].pin_detect = GPIO37, .sfp_port[1].pin_detect = GPIO37,
.sfp_port[1].pin_los = GPIO_NA, .sfp_port[1].pin_los = GPIO_NA,
.sfp_port[1].sds = 0, .sfp_port[1].sds = 0,
.sfp_port[1].i2c = { .sda = GPIO41_I2C_SDA3_MDIO1, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO48_I2C_SCL1, // Button-Switch is unpopulated on PCB, but can be added manually (hole in case is already there) .reset_pin = GPIO48_I2C_SCL1, // Button-Switch is unpopulated on PCB, but can be added manually (hole in case is already there)
.high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 }, .high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
@@ -152,7 +175,7 @@ __code const struct machine machine = {
.sfp_port[0].pin_los = GPIO37, .sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA, .sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA, .reset_pin = GPIO_NA,
.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 }, .high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 0}, .port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 0},
@@ -177,7 +200,7 @@ __code const struct machine machine = {
.sfp_port[0].pin_los = GPIO37, .sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA, .sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO54_ACL_BIT2_EN, .reset_pin = GPIO54_ACL_BIT2_EN,
.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 }, .high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1 }, .port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1 },
@@ -227,7 +250,7 @@ __code const struct machine machine = {
.sfp_port[0].pin_detect = GPIO38, .sfp_port[0].pin_detect = GPIO38,
.sfp_port[0].pin_los = GPIO_NA, .sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO48_I2C_SCL1, .reset_pin = GPIO48_I2C_SCL1,
.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 }, .high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1}, .port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
@@ -265,13 +288,13 @@ __code const struct machine machine = {
.sfp_port[0].pin_los = GPIO_NA, .sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].pin_tx_disable = GPIO_NA, .sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, /* GPIO 39 */ .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ), /* GPIO 39 */
// Right SFP port (J2) // Right SFP port (J2)
.sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX, .sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
.sfp_port[1].pin_los = GPIO_NA, .sfp_port[1].pin_los = GPIO_NA,
.sfp_port[1].pin_tx_disable = GPIO_NA, .sfp_port[1].pin_tx_disable = GPIO_NA,
.sfp_port[1].sds = 0, .sfp_port[1].sds = 0,
.sfp_port[1].i2c = { .sda = GPIO41_I2C_SDA3_MDIO1, .scl = GPIO40_I2C_SCL3_MDC1 }, /* GPIO 40 */ .sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ), /* GPIO 40 */
.reset_pin = GPIO54_ACL_BIT2_EN, .reset_pin = GPIO54_ACL_BIT2_EN,
.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 }, .high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1}, .port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
@@ -306,13 +329,13 @@ __code const struct machine machine = {
.sfp_port[0].pin_los = GPIO37, .sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA, .sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, /* GPIO 39 */ .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ), /* GPIO 39 */
// Right SFP port (J2) // Right SFP port (J2)
.sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX, .sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
.sfp_port[1].pin_los = GPIO51_I2C_SDA2_UART1_RX, .sfp_port[1].pin_los = GPIO51_I2C_SDA2_UART1_RX,
.sfp_port[1].pin_tx_disable = GPIO_NA, .sfp_port[1].pin_tx_disable = GPIO_NA,
.sfp_port[1].sds = 0, .sfp_port[1].sds = 0,
.sfp_port[1].i2c = { .sda = GPIO41_I2C_SDA3_MDIO1, .scl = GPIO40_I2C_SCL3_MDC1 }, /* GPIO 40 */ .sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ), /* GPIO 40 */
.reset_pin = GPIO_NA, .reset_pin = GPIO_NA,
.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 }, .high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1}, .port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
@@ -346,7 +369,7 @@ __code const struct machine machine = {
.sfp_port[0].pin_los = GPIO_NA, .sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].pin_tx_disable = GPIO_NA, .sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO48_I2C_SCL1, .reset_pin = GPIO48_I2C_SCL1,
.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 }, .high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1}, .port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
@@ -385,12 +408,12 @@ __code const struct machine machine = {
.sfp_port[0].pin_los = 10, .sfp_port[0].pin_los = 10,
.sfp_port[0].pin_tx_disable = 0xFF, .sfp_port[0].pin_tx_disable = 0xFF,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sda = GPIO41_I2C_SDA3_MDIO1, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[0].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
.sfp_port[1].pin_detect = 30, .sfp_port[1].pin_detect = 30,
.sfp_port[1].pin_los = 51, .sfp_port[1].pin_los = 51,
.sfp_port[1].pin_tx_disable = 0xFF, .sfp_port[1].pin_tx_disable = 0xFF,
.sfp_port[1].sds = 0, .sfp_port[1].sds = 0,
.sfp_port[1].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[1].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA, .reset_pin = GPIO_NA,
.high_leds = { .mux = LED_27 , .enable = LED_27 | LED_29 }, .high_leds = { .mux = LED_27 , .enable = LED_27 | LED_29 },
.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1}, .port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
@@ -425,7 +448,7 @@ __code const struct machine machine = {
.sfp_port[0].pin_los = GPIO37, .sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA, .sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO54_ACL_BIT2_EN, .reset_pin = GPIO54_ACL_BIT2_EN,
.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 }, .high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1}, .port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
@@ -458,7 +481,7 @@ __code const struct machine machine = {
.sfp_port[0].pin_los = GPIO_NA, // no LOS pin wired .sfp_port[0].pin_los = GPIO_NA, // no LOS pin wired
.sfp_port[0].pin_tx_disable = GPIO_NA, .sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO54_ACL_BIT2_EN, .reset_pin = GPIO54_ACL_BIT2_EN,
.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 }, .high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1}, .port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
@@ -499,7 +522,7 @@ __code const struct machine machine = {
.sfp_port[0].pin_los = GPIO37, .sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA, .sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO54_ACL_BIT2_EN, .reset_pin = GPIO54_ACL_BIT2_EN,
.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 }, .high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1}, .port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
@@ -531,7 +554,7 @@ __code const struct machine machine = {
.sfp_port[0].pin_los = GPIO37, .sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA, .sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA, .reset_pin = GPIO_NA,
.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 }, .high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 0}, .port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 0},
@@ -556,12 +579,12 @@ __code const struct machine machine = {
.sfp_port[0].pin_los = GPIO50_I2C_SCL2_UART1_TX, .sfp_port[0].pin_los = GPIO50_I2C_SCL2_UART1_TX,
.sfp_port[0].pin_tx_disable = GPIO54_ACL_BIT2_EN, .sfp_port[0].pin_tx_disable = GPIO54_ACL_BIT2_EN,
.sfp_port[0].sds = 0, .sfp_port[0].sds = 0,
.sfp_port[0].i2c = { .sda = GPIO47_I2C_SDA0, .scl = GPIO46_I2C_SCL0 }, .sfp_port[0].i2c = I2CBUS( GPIO47_I2C_SDA0, GPIO46_I2C_SCL0 ),
.sfp_port[1].pin_detect = GPIO36_PWM_OUT, .sfp_port[1].pin_detect = GPIO36_PWM_OUT,
.sfp_port[1].pin_los = GPIO37, .sfp_port[1].pin_los = GPIO37,
.sfp_port[1].pin_tx_disable = GPIO51_I2C_SDA2_UART1_RX, .sfp_port[1].pin_tx_disable = GPIO51_I2C_SDA2_UART1_RX,
.sfp_port[1].sds = 1, .sfp_port[1].sds = 1,
.sfp_port[1].i2c = { .sda = GPIO49_I2C_SDA1, .scl = GPIO48_I2C_SCL1 }, .sfp_port[1].i2c = I2CBUS( GPIO49_I2C_SDA1, GPIO48_I2C_SCL1 ),
.reset_pin = GPIO_NA, .reset_pin = GPIO_NA,
.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1}, .port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
.led_sets = { .led_sets = {
@@ -596,13 +619,13 @@ __code const struct machine machine = {
.sfp_port[0].pin_detect = GPIO38, .sfp_port[0].pin_detect = GPIO38,
.sfp_port[0].pin_los = GPIO_NA, .sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
// Right SFP port // Right SFP port
.sfp_port[1].pin_detect = GPIO37, .sfp_port[1].pin_detect = GPIO37,
.sfp_port[1].pin_los = GPIO_NA, .sfp_port[1].pin_los = GPIO_NA,
.sfp_port[1].sds = 0, .sfp_port[1].sds = 0,
.sfp_port[1].i2c = { .sda = GPIO41_I2C_SDA3_MDIO1, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA, .reset_pin = GPIO_NA,
.high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 }, .high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
@@ -641,7 +664,7 @@ __code const struct machine machine = {
.sfp_port[0].pin_los = GPIO37, .sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA, .sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA, .reset_pin = GPIO_NA,
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1}, .port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
@@ -676,7 +699,7 @@ __code const struct machine machine = {
.sfp_port[0].pin_los = GPIO_NA, .sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].pin_tx_disable = GPIO_NA, .sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO48_I2C_SCL1, .reset_pin = GPIO48_I2C_SCL1,
.high_leds = { .mux = LED_28_SYS, .enable = LED_27 | LED_28_SYS | LED_29 }, .high_leds = { .mux = LED_28_SYS, .enable = LED_27 | LED_28_SYS | LED_29 },
.led_mux_custom = 1, .led_mux_custom = 1,
@@ -720,14 +743,14 @@ __code const struct machine machine = {
.sfp_port[0].pin_los = GPIO37, .sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA, .sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
// Right SFP port (6) // Right SFP port (6)
// LED pin 24 // LED pin 24
.sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX, .sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
.sfp_port[1].pin_los = GPIO51_I2C_SDA2_UART1_RX, .sfp_port[1].pin_los = GPIO51_I2C_SDA2_UART1_RX,
.sfp_port[1].pin_tx_disable = GPIO_NA, .sfp_port[1].pin_tx_disable = GPIO_NA,
.sfp_port[1].sds = 0, .sfp_port[1].sds = 0,
.sfp_port[1].i2c = { .sda = GPIO41_I2C_SDA3_MDIO1, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA, .reset_pin = GPIO_NA,
.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 }, .high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1}, .port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
@@ -769,11 +792,7 @@ __code const struct machine machine = {
.sfp_port[0].pin_los = GPIO37, .sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA, .sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.sda = GPIO39_I2C_SDA4,
.scl = GPIO40_I2C_SCL3_MDC1
},
.reset_pin = GPIO_NA, .reset_pin = GPIO_NA,
.high_leds = { .high_leds = {
@@ -823,14 +842,14 @@ __code const struct machine machine = {
.sfp_port[0].pin_los = GPIO37, .sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA, .sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
/* Right SFP (logical 3, SDS0): GPIO50=ModAbs, GPIO51=RX_LOS */ /* Right SFP (logical 3, SDS0): GPIO50=ModAbs, GPIO51=RX_LOS */
.sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX, .sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
.sfp_port[1].pin_los = GPIO51_I2C_SDA2_UART1_RX, .sfp_port[1].pin_los = GPIO51_I2C_SDA2_UART1_RX,
.sfp_port[1].pin_tx_disable = GPIO_NA, .sfp_port[1].pin_tx_disable = GPIO_NA,
.sfp_port[1].sds = 0, .sfp_port[1].sds = 0,
.sfp_port[1].i2c = { .sda = GPIO41_I2C_SDA3_MDIO1, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA, .reset_pin = GPIO_NA,
@@ -879,14 +898,14 @@ __code const struct machine machine = {
.sfp_port[0].pin_los = GPIO_NA, .sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].pin_tx_disable = GPIO_NA, .sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 0, .sfp_port[0].sds = 0,
.sfp_port[0].i2c = { .sda = GPIO41_I2C_SDA3_MDIO1, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[0].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
// SFP port on SDS1 / logical port 8 // SFP port on SDS1 / logical port 8
.sfp_port[1].pin_detect = GPIO38, .sfp_port[1].pin_detect = GPIO38,
.sfp_port[1].pin_los = GPIO_NA, .sfp_port[1].pin_los = GPIO_NA,
.sfp_port[1].pin_tx_disable = GPIO_NA, .sfp_port[1].pin_tx_disable = GPIO_NA,
.sfp_port[1].sds = 1, .sfp_port[1].sds = 1,
.sfp_port[1].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[1].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA, .reset_pin = GPIO_NA,
.high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 }, .high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
@@ -925,7 +944,7 @@ __code const struct machine machine = {
.sfp_port[0].pin_los = GPIO_NA, .sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].pin_tx_disable = GPIO_NA, .sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA, .reset_pin = GPIO_NA,
.high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 }, .high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
@@ -968,7 +987,7 @@ __code const struct machine machine = {
.sfp_port[0].pin_los = GPIO37, .sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA, .sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA, .reset_pin = GPIO_NA,
.high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 }, .high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
@@ -1049,13 +1068,13 @@ __code const struct machine machine = {
.sfp_port[0].pin_detect = GPIO38, .sfp_port[0].pin_detect = GPIO38,
.sfp_port[0].pin_los = GPIO_NA, .sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
// Right SFP port // Right SFP port
.sfp_port[1].pin_detect = GPIO37, .sfp_port[1].pin_detect = GPIO37,
.sfp_port[1].pin_los = GPIO_NA, .sfp_port[1].pin_los = GPIO_NA,
.sfp_port[1].sds = 0, .sfp_port[1].sds = 0,
.sfp_port[1].i2c = { .sda = GPIO41_I2C_SDA3_MDIO1, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA, .reset_pin = GPIO_NA,
.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 }, .high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
@@ -1114,7 +1133,7 @@ __code const struct machine machine = {
.sfp_port[0].pin_los = GPIO_NA, .sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].pin_tx_disable = GPIO_NA, .sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA, .reset_pin = GPIO_NA,
.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 }, .high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = {0, 0, 0, 0, 0, 0, 0, 0, 1}, .port_led_set = {0, 0, 0, 0, 0, 0, 0, 0, 1},
@@ -1160,10 +1179,7 @@ __code const struct machine machine = {
.sfp_port[0].pin_los = GPIO37, .sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA, .sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.sda = GPIO39_I2C_SDA4,
.scl = GPIO40_I2C_SCL3_MDC1
},
.reset_pin = GPIO_NA, .reset_pin = GPIO_NA,
.high_leds = { .mux = 0, .enable = 0 }, .high_leds = { .mux = 0, .enable = 0 },
@@ -1197,7 +1213,7 @@ __code const struct machine machine = {
.sfp_port[0].pin_los = GPIO37, .sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA, .sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA, .reset_pin = GPIO_NA,
.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 }, .high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1}, .port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
@@ -1241,7 +1257,7 @@ __code const struct machine machine = {
.sfp_port[0].pin_los = GPIO37, .sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA, .sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1, .sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 }, .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA, .reset_pin = GPIO_NA,
machine.h
+1 -8
View File
@@ -49,13 +49,6 @@
// #define MACHINE_PB_2132 // #define MACHINE_PB_2132
// #define MACHINE_HASIVO_S600W_4GT_2XGT_SE // #define MACHINE_HASIVO_S600W_4GT_2XGT_SE
typedef struct {
// GPIO pins for SDA/SCL
uint8_t sda;
uint8_t scl;
} i2c_bus_t;
#define LED_27 1 #define LED_27 1
// SYSTEM LED // SYSTEM LED
#define LED_28_SYS 2 #define LED_28_SYS 2
@@ -74,7 +67,7 @@ struct sfp_port
uint8_t pin_los; // gpio number 0-63, 0xFF = don't have it? uint8_t pin_los; // gpio number 0-63, 0xFF = don't have it?
uint8_t pin_tx_disable; // gpio number 0-63, 0xFF = not present uint8_t pin_tx_disable; // gpio number 0-63, 0xFF = not present
uint8_t sds; uint8_t sds;
i2c_bus_t i2c; uint8_t i2c;
}; };
struct machine { struct machine {
rtl837x_pins.c
+1 -34
View File
@@ -10,38 +10,6 @@ extern __xdata uint8_t sfr_data[4];
#pragma codeseg BANK2 #pragma codeseg BANK2
#pragma constseg BANK2 #pragma constseg BANK2
uint8_t i2c_bus_from_sda_pin(uint8_t sda_pin) __banked {
switch (sda_pin) {
case GPIO47_I2C_SDA0:
return 0;
case GPIO49_I2C_SDA1:
return 1;
case GPIO51_I2C_SDA2_UART1_RX:
return 2;
case GPIO41_I2C_SDA3_MDIO1:
return 3;
case GPIO39_I2C_SDA4:
return 4;
default:
return 0xFF;
}
}
uint8_t i2c_bus_from_scl_pin(uint8_t scl_pin) __banked{
switch (scl_pin) {
case GPIO46_I2C_SCL0:
return 0;
case GPIO48_I2C_SCL1:
return 1;
case GPIO50_I2C_SCL2_UART1_TX:
return 2;
case GPIO40_I2C_SCL3_MDC1:
return 3;
default:
return 0xFF;
}
}
/* Returns RTL837X_REG_GPIO_XX_OUTPUT register address */ /* Returns RTL837X_REG_GPIO_XX_OUTPUT register address */
static uint16_t gpio_output_reg(uint8_t pin) __banked{ static uint16_t gpio_output_reg(uint8_t pin) __banked{
return pin < 32 ? RTL837X_REG_GPIO_00_31_OUTPUT : RTL837X_REG_GPIO_32_63_OUTPUT; return pin < 32 ? RTL837X_REG_GPIO_00_31_OUTPUT : RTL837X_REG_GPIO_32_63_OUTPUT;
@@ -147,8 +115,7 @@ bool sfp_read_block(uint8_t slot, uint8_t reg, uint8_t len) __banked __reentrant
REG_WRITE(RTL837X_REG_I2C_CTRL, 0x00, REG_WRITE(RTL837X_REG_I2C_CTRL, 0x00,
0x1 << (I2C_MEM_ADDR_WIDTH - 16) | len, 0x1 << (I2C_MEM_ADDR_WIDTH - 16) | len,
(dev >> 5) | i2c_bus_from_scl_pin(machine.sfp_port[slot].i2c.scl) << 5 (dev >> 5) | machine.sfp_port[slot].i2c,
| i2c_bus_from_sda_pin(machine.sfp_port[slot].i2c.sda) << 2,
((dev << 3) & 0xff) | 0x1); ((dev << 3) & 0xff) | 0x1);
do { do {
rtl837x_pins.h
-6
View File
@@ -71,12 +71,6 @@
/* Not available GPIO */ /* Not available GPIO */
#define GPIO_NA 0xFF #define GPIO_NA 0xFF
/* Convert SDA PIN GPIO to I2C bus number */
uint8_t i2c_bus_from_sda_pin(uint8_t sda_pin) __banked;
/* Convert SCL PIN GPIO to I2C bus number */
uint8_t i2c_bus_from_scl_pin(uint8_t scl_pin) __banked;
/* /*
* Setup a GPIO pin as input * Setup a GPIO pin as input
* pin: GPIO pin number 0-63 * pin: GPIO pin number 0-63
rtl837x_regs.h
+4
View File
@@ -126,6 +126,10 @@
#define RTL837X_REG_I2C_CTRL2 0x041c #define RTL837X_REG_I2C_CTRL2 0x041c
#define RTL837X_REG_I2C_IN 0x0420 #define RTL837X_REG_I2C_IN 0x0420
#define RTL837X_REG_I2C_OUT 0x0424 #define RTL837X_REG_I2C_OUT 0x0424
#define RTL837X_REG_I2C_SCL_SHIFT 5
#define RTL837X_REG_I2C_SDA_SHIFT 2
#define RTL837X_REG_I2C_SCL_MASK 0x3
#define RTL837X_REG_I2C_SDA_MASK 0x7
/* /*
* NIC Related registers * NIC Related registers