mirror of
https://github.com/logicog/RTLPlayground.git
synced 2026-11-01 18:04:12 +08:00
make rename doc to match pcb name
This commit is contained in:
HL Yi committed
1 parent
c41474b1a7
commit
83f335f3e8
139 files changed
+222
-222
No files matched your search
@@ -26,11 +26,11 @@ Manufacturer information be found [on the product page](https://www.trendnet.com
|
||||
|
||||
Top side
|
||||
|
||||
<img src="photos/TEG-S562/TEG-S562-v1.0R-top.jpg" width="300" />
|
||||
<img src="photos/270-NB1-MS206B004A1-REV.A1/TEG-S562-v1.0R-top.jpg" width="300" />
|
||||
|
||||
Bottom
|
||||
|
||||
<img src="photos/TEG-S562/TEG-S562-v1.0R-bottom.jpg" width="300" />
|
||||
<img src="photos/270-NB1-MS206B004A1-REV.A1/TEG-S562-v1.0R-bottom.jpg" width="300" />
|
||||
|
||||
## Connectors
|
||||
|
||||
@@ -167,9 +167,9 @@ each cage - the left cage reports `sds_config sds: 01` and the right cage
|
||||
|
||||
### Machine target
|
||||
|
||||
Build for this device with `make MACHINE=2G5F4_10G2_V1_01`, which selects the
|
||||
`machine/2G5F4_10G2_V1_01.c` board definition. It is derived from
|
||||
`machine/KP_9000_6XHML_X2.c` with the SFP cage order and the reset pin changed.
|
||||
Build for this device with `make MACHINE=HONGYAVISION_HYWS_SGT0204S`, which selects the
|
||||
`machine/HONGYAVISION_HYWS_SGT0204S.c` board definition. It is derived from
|
||||
`machine/KEEPLINK_KP_9000_6XHML_X2.c` with the SFP cage order and the reset pin changed.
|
||||
The fitted T25S40 cannot be read in DIO mode on this board: an image that leaves
|
||||
DIO enabled does not come up at all, both at the default read clock divider of 4
|
||||
and at 8 (two boards tested), while the same image with single-IO boots and runs
|
||||
|
||||
@@ -32,15 +32,15 @@ Stock flash chip is 512KB in size. Consider replacing for update through Web UI.
|
||||
|
||||
Top side
|
||||
|
||||
<img src="photos/HYWS-SGT0108S-unmanaged\Assembled-top.jpg" width="300" />
|
||||
<img src="photos/2G5F_20G_V1.01/Assembled-top.jpg" width="300" />
|
||||
|
||||
Front
|
||||
|
||||
<img src="photos/HYWS-SGT0108S-unmanaged\Assembled-front.jpg" width="300" />
|
||||
<img src="photos/2G5F_20G_V1.01/Assembled-front.jpg" width="300" />
|
||||
|
||||
Bottom
|
||||
|
||||
<img src="photos/HYWS-SGT0108S-unmanaged\Assembled-bottom.jpg" width="300" />
|
||||
<img src="photos/2G5F_20G_V1.01/Assembled-bottom.jpg" width="300" />
|
||||
|
||||
### PCB overview
|
||||
|
||||
@@ -49,15 +49,15 @@ Bottom
|
||||
|
||||
Top side
|
||||
|
||||
<img src="photos/HYWS-SGT0108S-unmanaged\PCB-top.jpg" width="300" />
|
||||
<img src="photos/2G5F_20G_V1.01/PCB-top.jpg" width="300" />
|
||||
|
||||
Bottom
|
||||
|
||||
<img src="photos/HYWS-SGT0108S-unmanaged\PCB-bot.jpg" width="300" />
|
||||
<img src="photos/2G5F_20G_V1.01/PCB-bot.jpg" width="300" />
|
||||
|
||||
Original SPI Flash Chip
|
||||
|
||||
<img src="photos/HYWS-SGT0108S-unmanaged\og_spi_flash.jpg" width="300" />
|
||||
<img src="photos/2G5F_20G_V1.01/og_spi_flash.jpg" width="300" />
|
||||
|
||||
## Power supply
|
||||
|
||||
@@ -7,7 +7,7 @@
|
||||
|
||||
## PCB
|
||||
|
||||
<img src="photos/2M-PCB23-V2.2-managed/2M-PCB23-V2.2-top.jpg" width="300" />
|
||||
<img src="photos/2M-PCB23-V2.2/2M-PCB23-V2.2-top.jpg" width="300" />
|
||||
|
||||
## Port overview
|
||||
|
||||
@@ -7,7 +7,7 @@
|
||||
|
||||
## PCB
|
||||
|
||||
<img src="photos/2M-PCB23-V3.1-managed/2M-PCB23-V3.1-top.jpeg" width="300" />
|
||||
<img src="photos/2M-PCB23-V3.1/2M-PCB23-V3.1-top.jpeg" width="300" />
|
||||
|
||||
## Port overview
|
||||
|
||||
@@ -10,14 +10,14 @@ The original web interface reports this board as hardware version V3.2
|
||||
|
||||
## PCB
|
||||
|
||||
<img src="photos/2M-PCB23-V3.2-managed/2M-PCB23-V3.2-top.jpeg" width="300" />
|
||||
<img src="photos/2M-PCB23-V3.2/2M-PCB23-V3.2-top.jpeg" width="300" />
|
||||
|
||||
## Compared to V3.1
|
||||
|
||||
The component placement matches [2M-PCB23-V3.1](2M-PCB23-V3_1.md): same
|
||||
The component placement matches [2M-PCB23-V3.1](2M-PCB23-V3.1.md): same
|
||||
positions for the flash (U8), the T7/T8/T9/T10 headers, the SFP cage and its
|
||||
LED, and the unpopulated U7/U9 footprints. Build with
|
||||
`make MACHINE=KP_9000_9XHML_X_V3_2`, whose board file is a symlink to the V3.1
|
||||
`make MACHINE=KEEPLINK_KP_9000_9XHML_X_V3_2`, whose board file is a symlink to the V3.1
|
||||
definition and only differs in the reported name.
|
||||
|
||||
## Tested
|
||||
@@ -15,17 +15,17 @@ and sold by Mokerlink.
|
||||
The device is fully supported:
|
||||
- All 4 2.5GBASE-T RJ45 ports work at 10/100/1000/2500 Mbps
|
||||
- The SFP+ port supports 1G, 2.5G and 10G modules
|
||||
- LEDs work with the same indiciations as the OEM firmware (build with `make MACHINE=KP_9000_6XHML_X2_V1_1` if building yourself, or use the corresponding pre-compiled binary)
|
||||
- LEDs work with the same indiciations as the OEM firmware (build with `make MACHINE=MOKERLINK_2G040210GSM` if building yourself, or use the corresponding pre-compiled binary)
|
||||
- untested due to missing Hardware: SFP+ ports equipped with 1G or 2.5G SFPs.
|
||||
|
||||
### Hardware overview
|
||||
Front
|
||||
|
||||
<img src="photos/2M-PCB43-V1.1-managed/2M-PCB43-V1.1-front.jpeg" width="300" />
|
||||
<img src="photos/2M-PCB43-V1.1/2M-PCB43-V1.1-front.jpeg" width="300" />
|
||||
|
||||
Label
|
||||
|
||||
<img src="photos/2M-PCB43-V1.1-managed/2M-PCB43-V1.1-label.jpeg" width="300" />
|
||||
<img src="photos/2M-PCB43-V1.1/2M-PCB43-V1.1-label.jpeg" width="300" />
|
||||
|
||||
### PCB overview
|
||||
|
||||
@@ -34,11 +34,11 @@ Label
|
||||
|
||||
Top side
|
||||
|
||||
<img src="photos/2M-PCB43-V1.1-managed/2M-PCB43-V1.1-top.jpeg" width="300" />
|
||||
<img src="photos/2M-PCB43-V1.1/2M-PCB43-V1.1-top.jpeg" width="300" />
|
||||
|
||||
Bottom
|
||||
|
||||
<img src="photos/2M-PCB43-V1.1-managed/2M-PCB43-V1.1-bottom.jpeg" width="300" />
|
||||
<img src="photos/2M-PCB43-V1.1/2M-PCB43-V1.1-bottom.jpeg" width="300" />
|
||||
|
||||
### J1, serial console
|
||||
|
||||
|
||||
@@ -22,9 +22,9 @@ reliable indicator of PCB wiring. The PCB revision defines the hardware layout.
|
||||
|
||||
| PCB silkscreen | Known labels / devices | Recommended machine target | Equivalent target | Legacy target |
|
||||
| --- | --- | --- | --- | --- |
|
||||
| `2M-PCB43-V1.1` | Mokerlink 2G040210GSM web-managed 4+2 switch | `MACHINE_KP_9000_6XHML_X2_V1_1` | `MACHINE_KP_9000_6XH_X2_V1_1` | `MACHINE_KP_9000_6XHML_X2` |
|
||||
| `2M-PCB43-V1.2` | `KP-9000-6XHML-X2` | `MACHINE_KP_9000_6XHML_X2_V1_2` | `MACHINE_KP_9000_6XH_X2_V1_2` | `MACHINE_KP_9000_6XHML_X2` |
|
||||
| `2M-PCB43-V2.1` | `KP-9000-6XH-X2`, `KP-9000-6XHML-X2` | `MACHINE_KP_9000_6XH_X2_V2_1` or `MACHINE_KP_9000_6XHML_X2_V2_1` | same V2.1 layout | `MACHINE_KP_9000_6XH_X2` |
|
||||
| `2M-PCB43-V1.1` | Mokerlink 2G040210GSM web-managed 4+2 switch | `MACHINE_MOKERLINK_2G040210GSM` | `MACHINE_KEEPLINK_KP_9000_6XH_V1_1` | `MACHINE_KEEPLINK_KP_9000_6XHML_X2` |
|
||||
| `2M-PCB43-V1.2` | `KP-9000-6XHML-X2` | `MACHINE_KEEPLINK_KP_9000_6XHML_V1_2` | `MACHINE_KEEPLINK_KP_9000_6XH_V1_2` | `MACHINE_KEEPLINK_KP_9000_6XHML_X2` |
|
||||
| `2M-PCB43-V2.1` | `KP-9000-6XH-X2`, `KP-9000-6XHML-X2` | `MACHINE_KEEPLINK_KP_9000_6XH_X2_V2_1` or `MACHINE_KEEPLINK_KP_9000_6XHML_V2_1` | same V2.1 layout | `MACHINE_KEEPLINK_KP_9000_6XH_X2` |
|
||||
|
||||
The V1.1 and V1.2 boards currently use the same V1.x GPIO, SFP, port and LED
|
||||
layout. The V2.1 board uses a different V2.1 layout with custom LED muxing.
|
||||
@@ -42,11 +42,11 @@ new builds should prefer the explicit PCB-revision targets.
|
||||
|
||||
Front side:
|
||||
|
||||
<img src="photos/2M-PCB43-V2.1-unmanaged/KP-9000-6XH-X2-front.jpg" width="600" />
|
||||
<img src="photos/2M-PCB43-V2.1/KP-9000-6XH-X2-front.jpg" width="600" />
|
||||
|
||||
Label:
|
||||
|
||||
<img src="photos/2M-PCB43-V2.1-unmanaged/KP-9000-6XH-X2-label.jpg" width="600" />
|
||||
<img src="photos/2M-PCB43-V2.1/KP-9000-6XH-X2-label.jpg" width="600" />
|
||||
|
||||
|
||||
|
||||
@@ -57,11 +57,11 @@ Label:
|
||||
|
||||
Top side
|
||||
|
||||
<img src="photos/2M-PCB43-V2.1-unmanaged/2M-PCB43-V2.1-top.jpg" width="600" />
|
||||
<img src="photos/2M-PCB43-V2.1/2M-PCB43-V2.1-top.jpg" width="600" />
|
||||
|
||||
Bottom
|
||||
|
||||
<img src="photos/2M-PCB43-V2.1-unmanaged/2M-PCB43-V2.1-bottom.jpg" width="600" />
|
||||
<img src="photos/2M-PCB43-V2.1/2M-PCB43-V2.1-bottom.jpg" width="600" />
|
||||
|
||||
### Hardware overview: 2M-PCB43-V1.1 / V1.2
|
||||
|
||||
@@ -71,15 +71,15 @@ Both use the same V1.x layout.
|
||||
|
||||
Label:
|
||||
|
||||
<img src="photos/KP-9000-6XHML-X2/label.jpg" width="600" />
|
||||
<img src="photos/2M-PCB43-V2.1/KP-9000-6XH-X2-label.jpg" width="600" />
|
||||
|
||||
Top side:
|
||||
|
||||
<img src="photos/KP-9000-6XHML-X2/pcb_top.jpg" width="600" />
|
||||
<img src="photos/2M-PCB43-V1.1/2M-PCB43-V1.1-top.jpeg" width="600" />
|
||||
|
||||
Bottom:
|
||||
|
||||
<img src="photos/KP-9000-6XHML-X2/pcb_bottom.jpg" width="600" />
|
||||
<img src="photos/2M-PCB43-V1.1/2M-PCB43-V1.1-bottom.jpeg" width="600" />
|
||||
|
||||
## Reset Button
|
||||
|
||||
@@ -12,11 +12,11 @@ The`KP-9000-9XHP-X` is the KeepLink rebrand for same product.
|
||||
## Hardware overview
|
||||
Front
|
||||
|
||||
<img src="photos/POE-2G080110GS/POE-2G080110GS-front.jpg" width="300" />
|
||||
<img src="photos/2M-PCB51-ML-V1.1/POE-2G080110GS-front.jpg" width="300" />
|
||||
|
||||
Label
|
||||
|
||||
<img src="photos/POE-2G080110GS/POE-2G080110GS-label.jpg" width="300" />
|
||||
<img src="photos/2M-PCB51-ML-V1.1/POE-2G080110GS-label.jpg" width="300" />
|
||||
|
||||
The stock firmware from a POE-2G080110GS device had a sha256sum of `4c280853465eaad80e1772075c0f2d29c11fb8c561547f06353d3a5443c388e9`.
|
||||
|
||||
@@ -24,11 +24,11 @@ The stock firmware from a POE-2G080110GS device had a sha256sum of `4c280853465e
|
||||
|
||||
Top silkscreen is marked `2M-PCB51-ML-V1.1`. PoE is provided by RTL8238C. Flash chip is 4 MB Winbond 25Q32JV (U8).
|
||||
|
||||
<img src="photos/POE-2G080110GS/POE-2G080110GS-pcb.jpg" width="300" />
|
||||
<img src="photos/2M-PCB51-ML-V1.1/POE-2G080110GS-pcb.jpg" width="300" />
|
||||
|
||||
> [!CAUTION]
|
||||
> This device operates on mains voltage, which can be a dangerous or potentially lethal hazard. Even after the device is unplugged, high-voltage capacitors can remain charged afterward and may still shock you. Do not attempt to open/disassemble a mains powered device unless you understand how to do so safely. Also, opening the device may void your warranty.
|
||||
|
||||
## Notes
|
||||
|
||||
The stock firmware blinks both the 2.5G and 1G LEDs on activity, despite the front of the device indicating that each LED should be independent. The `POE_2G080110GS` machine config behaves as the front of the device indicates (and what seems more logical) -- each port LED turns on and blinks independently.
|
||||
The stock firmware blinks both the 2.5G and 1G LEDs on activity, despite the front of the device indicating that each LED should be independent. The `MOKERLINK_POE_2G080110GS` machine config behaves as the front of the device indicates (and what seems more logical) -- each port LED turns on and blinks independently.
|
||||
@@ -27,7 +27,7 @@ Documentation for the unmanaged 8 + 1 switch sold as `7018-2.5G` by Guangnianwei
|
||||
### Build target
|
||||
|
||||
```
|
||||
make MACHINE=F7008_2_5
|
||||
make MACHINE=GUANGNIANWEI_7018_2_5G
|
||||
```
|
||||
|
||||
### LED wiring
|
||||
@@ -57,11 +57,11 @@ The board is marked `F7008-2.5GPOE-V1.2`.
|
||||
|
||||
Top side:
|
||||
|
||||
<img src="photos/F7008-2.5/PCB-top.jpg" width="600" />
|
||||
<img src="photos/F7008-2.5GPOE-V1.2/PCB-top.jpg" width="600" />
|
||||
|
||||
Bottom side:
|
||||
|
||||
<img src="photos/F7008-2.5/PCB-bottom.jpg" width="600" />
|
||||
<img src="photos/F7008-2.5GPOE-V1.2/PCB-bottom.jpg" width="600" />
|
||||
|
||||
### Hardware notes
|
||||
|
||||
@@ -12,12 +12,12 @@
|
||||
- **Ports**:
|
||||
- 4 × RJ45: 10/100/1000/2500 Mbps
|
||||
- 2 × SFP+: 1000 / 2500 / 10000 Mbps
|
||||
<img src="photos/HG0402XG_V1_1/HG0402XG_V1_1_bottom.jpg" width="300" />
|
||||
<img src="photos/HG0402XG-V1.1/ZOERAX_HG0402XG_V1_1_bottom.jpg" width="300" />
|
||||
|
||||
## PCB
|
||||
|
||||
<img src="photos/HG0402XG_V1_1/HG0402XG_V1_1_top.jpg" width="300" />
|
||||
<img src="photos/HG0402XG_V1_1/HG0402XG_V1_1_bottom.jpg" width="300" />
|
||||
<img src="photos/HG0402XG-V1.1/ZOERAX_HG0402XG_V1_1_top.jpg" width="300" />
|
||||
<img src="photos/HG0402XG-V1.1/ZOERAX_HG0402XG_V1_1_bottom.jpg" width="300" />
|
||||
|
||||
Be aware that the UART header is metric, the pitch is 2mm. The JST PH2.0mm header shown was addeded after purchase
|
||||
|
||||
@@ -26,7 +26,7 @@ Using SPI clamp in-board is the only method for initial installation.
|
||||
|
||||
Top side
|
||||
|
||||
<img src="photos/STEAMEMO_IG204_V1/PCB-top.jpg" width="600" />
|
||||
<img src="photos/PB-2131/PCB-top.jpg" width="600" />
|
||||
|
||||
### Connectors
|
||||
### T7, serial console
|
||||
@@ -17,7 +17,7 @@ PHY 2x RTL8261BE
|
||||
- 2 x RJ45: 10/100/1000/2500/5000/10000 Mbps
|
||||
- **Power**: 12V DC, 2A barrel connector
|
||||
|
||||
<img src="photos/ZX310S-4T2XT/label.jpg" width="300" />
|
||||
<img src="photos/PCB-310S-4T2XT-V1.0.0_22273/label.jpg" width="300" />
|
||||
|
||||
### What works
|
||||
The device is fully supported:
|
||||
@@ -28,15 +28,15 @@ The device is fully supported:
|
||||
### PCB overview
|
||||
|
||||
**Board markings**
|
||||
- Top silkscreen: PCB-SL310S-4T2XT-V1.0.0-22273
|
||||
- Top silkscreen: PCB-310S-4T2XT-V1.0.0_22273
|
||||
|
||||
Top side
|
||||
|
||||
<img src="photos/ZX310S-4T2XT/pcb_top.jpg" width="300" />
|
||||
<img src="photos/PCB-310S-4T2XT-V1.0.0_22273/pcb_top.jpg" width="300" />
|
||||
|
||||
Bottom
|
||||
|
||||
<img src="photos/ZX310S-4T2XT/pcb_bottom.jpg" width="300" />
|
||||
<img src="photos/PCB-310S-4T2XT-V1.0.0_22273/pcb_bottom.jpg" width="300" />
|
||||
|
||||
### J1, serial console
|
||||
|
||||
+4
-4
@@ -25,21 +25,21 @@ RTL8373-based 8×2.5G PoE + 1×10G SFP+ web-managed switch, sold as the
|
||||
|
||||
Front panel:
|
||||
|
||||
<img src="photos/PCB-AFGW_SWTG218ANS_V2.0.2/device_front.jpg" width="800" />
|
||||
<img src="photos/PCB-AFGW-SWTG218ANS_V2.0.2_23308e/device_front.jpg" width="800" />
|
||||
|
||||
Board mounted in the case, with the internal PSU above it:
|
||||
|
||||
<img src="photos/PCB-AFGW_SWTG218ANS_V2.0.2/dev_top_w_pcb.jpg" width="800" />
|
||||
<img src="photos/PCB-AFGW-SWTG218ANS_V2.0.2_23308e/dev_top_w_pcb.jpg" width="800" />
|
||||
|
||||
### PCB overview
|
||||
|
||||
Top side:
|
||||
|
||||
<img src="photos/PCB-AFGW_SWTG218ANS_V2.0.2/pcb_front.jpg" width="800" />
|
||||
<img src="photos/PCB-AFGW-SWTG218ANS_V2.0.2_23308e/pcb_front.jpg" width="800" />
|
||||
|
||||
Bottom side:
|
||||
|
||||
<img src="photos/PCB-AFGW_SWTG218ANS_V2.0.2/pcb_back.jpg" width="800" />
|
||||
<img src="photos/PCB-AFGW-SWTG218ANS_V2.0.2_23308e/pcb_back.jpg" width="800" />
|
||||
|
||||
A 4-pad UART header with `RXD` / `TXD` silkscreened sits next to the right heatsink.
|
||||
|
||||
@@ -30,11 +30,11 @@ Using SPI clamp in-board is the only method for initial installation.
|
||||
|
||||
Front panel
|
||||
|
||||
<img src="photos/FNS-1200P/chassis-front.jpg" width="400" />
|
||||
<img src="photos/PCB-K0402W-U13-V2.0/chassis-front.jpg" width="400" />
|
||||
|
||||
Top side (PCB)
|
||||
|
||||
<img src="photos/FNS-1200P/PCB-top.jpg" width="300" />
|
||||
<img src="photos/PCB-K0402W-U13-V2.0/PCB-top.jpg" width="300" />
|
||||
|
||||
### Port layout
|
||||
|
||||
@@ -6,7 +6,7 @@ The board does have footprints for a VLAN modeswitch at the front and a second f
|
||||
|
||||
### Brands
|
||||
|
||||
* YuanLey YS25-0402 <sup><sub>Note: there are [multiple revisions](PCB-K0402WS-V3.0.md) of the YS25-0402. This first revision lacks the "Vlan" switch cutout on the front of the enclosure.</sub></sup>
|
||||
* YuanLey YS25-0402 <sup><sub>Note: there are [multiple revisions](PCB-K0402W-V3.0.md) of the YS25-0402. This first revision lacks the "Vlan" switch cutout on the front of the enclosure.</sub></sup>
|
||||
|
||||
### Programming
|
||||
|
||||
@@ -14,7 +14,7 @@ Use a SOIC-8 clamp to the flash chip (U1 on silkscreen) at the top of the board,
|
||||
|
||||
The board has been seen to ship with a single [BoyaMicro BY25Q16BSSIG](https://www.lcsc.com/datasheet/C382744.pdf) 16Mbit (2MiB) chip, though exact BOM may vary.
|
||||
|
||||
<a href="photos/PCB-K0402WS-V1.0/flash.jpg"><img src="photos/PCB-K0402WS-V1.0/flash.jpg" width="300" /></a>
|
||||
<a href="photos/PCB-K0402W-V1.0/flash.jpg"><img src="photos/PCB-K0402W-V1.0/flash.jpg" width="300" /></a>
|
||||
|
||||
### What works
|
||||
|
||||
@@ -33,19 +33,19 @@ The board has been seen to ship with a single [BoyaMicro BY25Q16BSSIG](https://w
|
||||
|
||||
Front panel
|
||||
|
||||
<a href="photos/PCB-K0402WS-V1.0/ports.jpg"><img src="photos/PCB-K0402WS-V1.0/ports.jpg" width="300" /></a>
|
||||
<a href="photos/PCB-K0402W-V1.0/ports.jpg"><img src="photos/PCB-K0402W-V1.0/ports.jpg" width="300" /></a>
|
||||
|
||||
PCB top
|
||||
|
||||
<a href="photos/PCB-K0402WS-V1.0/pcb-top.jpg"><img src="photos/PCB-K0402WS-V1.0/pcb-top.jpg" width="300" /></a>
|
||||
<a href="photos/PCB-K0402W-V1.0/pcb-top.jpg"><img src="photos/PCB-K0402W-V1.0/pcb-top.jpg" width="300" /></a>
|
||||
|
||||
PCB bottom
|
||||
|
||||
<a href="photos/PCB-K0402WS-V1.0/pcb-bottom.jpg"><img src="photos/PCB-K0402WS-V1.0/pcb-bottom.jpg" width="300" /></a>
|
||||
<a href="photos/PCB-K0402W-V1.0/pcb-bottom.jpg"><img src="photos/PCB-K0402W-V1.0/pcb-bottom.jpg" width="300" /></a>
|
||||
|
||||
Bottom and rear
|
||||
|
||||
<a href="photos/PCB-K0402WS-V1.0/bottom.jpg"><img src="photos/PCB-K0402WS-V1.0/bottom.jpg" width="300" /></a>
|
||||
<a href="photos/PCB-K0402W-V1.0/bottom.jpg"><img src="photos/PCB-K0402W-V1.0/bottom.jpg" width="300" /></a>
|
||||
|
||||
### Power supply
|
||||
|
||||
@@ -69,4 +69,4 @@ Standard 0.1" / 2.54mm pin headers will not fit, so wires or clips may be used i
|
||||
|
||||
The image below shows some oversized clips clumsily attached.
|
||||
|
||||
<a href="photos/PCB-K0402WS-V1.0/uart.jpg"><img src="photos/PCB-K0402WS-V1.0/uart.jpg" width="300" /></a>
|
||||
<a href="photos/PCB-K0402W-V1.0/uart.jpg"><img src="photos/PCB-K0402W-V1.0/uart.jpg" width="300" /></a>
|
||||
@@ -30,15 +30,15 @@ Using SPI clamp in-board is the only method for initial installation.
|
||||
|
||||
Front panel
|
||||
|
||||
<img src="photos/PCB-K0402WS-V2.0/chassis-front.jpg" width="400" />
|
||||
<img src="photos/PCB-K0402W-V2.0/chassis-front.jpg" width="400" />
|
||||
|
||||
Bottom label
|
||||
|
||||
<img src="photos/PCB-K0402WS-V2.0/chassis-bottom.jpg" width="400" />
|
||||
<img src="photos/PCB-K0402W-V2.0/chassis-bottom.jpg" width="400" />
|
||||
|
||||
Top side (PCB)
|
||||
|
||||
<img src="photos/PCB-K0402WS-V2.0/PCB-top.jpg" width="300" />
|
||||
<img src="photos/PCB-K0402W-V2.0/PCB-top.jpg" width="300" />
|
||||
|
||||
### Port layout
|
||||
|
||||
@@ -11,21 +11,21 @@ of the device just above the big label, might be covered by a QC sticker.
|
||||
|
||||
* Hisource Hi-K0402WS
|
||||
|
||||
<img src="photos/PCB-K0402WS-V3.0/HiSource_HI-K0402WS.jpg" width="300" />
|
||||
<img src="photos/PCB-K0402W-V3.0/HiSource_HI-K0402WS.jpg" width="300" />
|
||||
|
||||
* Ztyuav Z-QWYT0402
|
||||
|
||||
<img src="photos/PCB-K0402WS-V3.0/Ztyuav_Z-QWYT0402.jpg" width="300" />
|
||||
<img src="photos/PCB-K0402W-V3.0/Ztyuav_Z-QWYT0402.jpg" width="300" />
|
||||
|
||||
<img src="photos/PCB-K0402WS-V3.0/Ztyuav_Z-QWYT0402_label.jpg" width="300" />
|
||||
<img src="photos/PCB-K0402W-V3.0/Ztyuav_Z-QWYT0402_label.jpg" width="300" />
|
||||
|
||||
* SICSOLINK SL-G0402F
|
||||
|
||||
<img src="photos/PCB-K0402WS-V3.0/SICSOLINK SL-G0402F.jpg" width="300"/>
|
||||
<img src="photos/PCB-K0402W-V3.0/SICSOLINK SL-G0402F.jpg" width="300"/>
|
||||
|
||||
* YuanLey YS25-0402 <sup><sub>Note: there are [multiple revisions](PCB-K0402WS-V1.0.md) of the YS25-0402. This is the newer revision that has a "Vlan" switch on the front.</sub></sup>
|
||||
* YuanLey YS25-0402 <sup><sub>Note: there are [multiple revisions](PCB-K0402W-V1.0.md) of the YS25-0402. This is the newer revision that has a "Vlan" switch on the front.</sub></sup>
|
||||
|
||||
<img src="photos/PCB-K0402WS-V3.0/YuanLey_YS25-0402.jpg" width="300"/>
|
||||
<img src="photos/PCB-K0402W-V3.0/YuanLey_YS25-0402.jpg" width="300"/>
|
||||
|
||||
### Programming
|
||||
|
||||
@@ -37,7 +37,7 @@ The switch actually controls the HOLD line of each flash chip, and toggling the
|
||||
|
||||
If the programming clip keeps HOLD not connected, the flashing will commence on whatever the switch selected, regardless on which chip was clipped.
|
||||
|
||||
For the initial flash (at least with flashrom), the bin file produced by the build is much smaller than the flash chip, it is suggested to pad the file to keep flashrom happy: `truncate -s 2097152 rtlplayground-*-PCB_K0402WS_V3.bin`. Note: do not then proceed to use this resulting padded file for the web flashing (as it bricks the device), use the original unpadded .bin.
|
||||
For the initial flash (at least with flashrom), the bin file produced by the build is much smaller than the flash chip, it is suggested to pad the file to keep flashrom happy: `truncate -s 2097152 rtlplayground-*-HISOURCE_HI_K0402WS_PCB_K0402WS_V3_0.bin`. Note: do not then proceed to use this resulting padded file for the web flashing (as it bricks the device), use the original unpadded .bin.
|
||||
|
||||
### What works (expected from label + similar devices)
|
||||
|
||||
@@ -52,11 +52,11 @@ For the initial flash (at least with flashrom), the bin file produced by the bui
|
||||
|
||||
Top side
|
||||
|
||||
<img src="photos/PCB-K0402WS-V3.0/PCB-top.jpg" width="300" />
|
||||
<img src="photos/PCB-K0402W-V3.0/PCB-top.jpg" width="300" />
|
||||
|
||||
Bottom
|
||||
|
||||
<img src="photos/PCB-K0402WS-V3.0/PCB-bottom.jpg" width="300" />
|
||||
<img src="photos/PCB-K0402W-V3.0/PCB-bottom.jpg" width="300" />
|
||||
|
||||
### T2, serial console
|
||||
|
||||
@@ -88,9 +88,9 @@ Voltage is created by chip marked as `Techcode TD1720`.
|
||||
|
||||
A reset button can be easily added by soldering a push button from TP131 (near the Spi ROM) to ground via a 1KOhm resistor.
|
||||
|
||||
**PS:** `The reset button GPIO must be defined in the machine.c file before building the image, it must be selected the GPIO30_ACL_BIT3_EN instead of GPIO_NA under the PCB_K0402WS-V3.0 configurations.`
|
||||
**PS:** `The reset button GPIO must be defined in the machine.c file before building the image, it must be selected the GPIO30_ACL_BIT3_EN instead of GPIO_NA under the PCB-K0402W-V3.0 configuration.`
|
||||
|
||||
Photo of the mod
|
||||
|
||||
<img src="photos/PCB-K0402WS-V3.0/Reset_mod.jpg" width="300" />
|
||||
<img src="photos/PCB-K0402W-V3.0/Reset_mod.jpg" width="300" />
|
||||
|
||||
@@ -18,6 +18,6 @@ The BoyaMicro 25Q16BSSIG flash chip is supported by flashprog with chip name "B.
|
||||
|
||||
The board is marked `PCB-K0501W-V2.0 DIP-K0501WS-V2.0`.
|
||||
|
||||
<img src="photos/K0501W_V2_0/pcb-top.jpg" width="300" />
|
||||
<img src="photos/PCB-K0501W-V2.0/pcb-top.jpg" width="300" />
|
||||
|
||||
<img src="photos/K0501W_V2_0/pcb-bottom.jpg" width="300" />
|
||||
<img src="photos/PCB-K0501W-V2.0/pcb-bottom.jpg" width="300" />
|
||||
@@ -21,15 +21,15 @@ Using SPI clamp in-board is the only method for initial installation.
|
||||
### PCB overview
|
||||
|
||||
**Board markings**
|
||||
- Top silkscreen: PCB-KO801W-V2.0 / DIP-KO801WS-V2.0
|
||||
- Top silkscreen: PCB-K0801W-V2.0 / DIP-KO801WS-V2.0
|
||||
|
||||
Top side
|
||||
|
||||
<img src="photos/K0801W-V2.0-unmanaged\PCB-top.jpg" width="300" />
|
||||
<img src="photos/PCB-K0801W-V2.0/PCB-top.jpg" width="300" />
|
||||
|
||||
Bottom
|
||||
|
||||
<img src="photos/K0801W-V2.0-unmanaged\PCB-bottom.jpg" width="300" />
|
||||
<img src="photos/PCB-K0801W-V2.0/PCB-bottom.jpg" width="300" />
|
||||
|
||||
## Power supply
|
||||
|
||||
@@ -22,7 +22,7 @@ PHY RTL8261BE
|
||||
- 1 × SFP+: 1000 / 2500 / 10000 Mbps
|
||||
- **Power**: 12V DC, 2A barrel connector
|
||||
|
||||
<img src="photos/ZX310S-4T2XH/label.jpg" width="300" />
|
||||
<img src="photos/PCB-SL310S-4T1T1X-V1.0.1-24107/label.jpg" width="300" />
|
||||
|
||||
### What works
|
||||
The device is fully supported:
|
||||
@@ -38,11 +38,11 @@ The device is fully supported:
|
||||
|
||||
Top side
|
||||
|
||||
<img src="photos/ZX310S-4T2XH/pcb_top.jpg" width="300" />
|
||||
<img src="photos/PCB-SL310S-4T1T1X-V1.0.1-24107/pcb_top.jpg" width="300" />
|
||||
|
||||
Bottom
|
||||
|
||||
<img src="photos/ZX310S-4T2XH/pcb_bottom.jpg" width="300" />
|
||||
<img src="photos/PCB-SL310S-4T1T1X-V1.0.1-24107/pcb_bottom.jpg" width="300" />
|
||||
|
||||
### J1, serial console
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
# SWTG018AS-A V2.0
|
||||
# PCB-SWTG018AS-A V2.0.1_19649
|
||||
## Brands
|
||||
| Brand | Type |Managed| PCB | Flash | Chip RTL |
|
||||
|---------|------------------|-------|------------------|-----------------|---------------|
|
||||
| Ampcom | SWTG018AS-A V2.0 | No | SWTG018AS-A V2.0 | 2MB | 8273N + 8224N |
|
||||
| Horaco | HC-SWTGW218AS-A | Yes | SWTG018AS-A V2.0 | 2MB(25Q16JVSIQ) | 8273N + 8224N |
|
||||
| GoodTop | GT-ST018M | Yes | SWTG018AS-A V2.0 | 2MB | 8273N + 8224N |
|
||||
| MokerLink | 2G08110GSN | No | SWTG018AS-A V2.0 | 512KB(25Q40) | 8273N + 8224N |
|
||||
| Ampcom | PCB-SWTG018AS-A V2.0.1_19649 | No | PCB-SWTG018AS-A V2.0.1_19649 | 2MB | 8273N + 8224N |
|
||||
| Horaco | HC-MOKERLINK_ZX_SWTGW218AS-A | Yes | PCB-SWTG018AS-A V2.0.1_19649 | 2MB(25Q16JVSIQ) | 8273N + 8224N |
|
||||
| GoodTop | GT-ST018M | Yes | PCB-SWTG018AS-A V2.0.1_19649 | 2MB | 8273N + 8224N |
|
||||
| MokerLink | MOKERLINK_2G08110GSN | No | PCB-SWTG018AS-A V2.0.1_19649 | 512KB(25Q40) | 8273N + 8224N |
|
||||
|
||||
|
||||
The following is a documentation for the unmanaged switch marked as `SWTG018AS-A V2.0`.
|
||||
The following is a documentation for the unmanaged switch marked as `PCB-SWTG018AS-A V2.0.1_19649`.
|
||||
It is e.g. sold under the Ampcom brand, but no branh-markings are found on the device.
|
||||
|
||||
The original software is running UART on 9600 baud rate.
|
||||
@@ -26,7 +26,7 @@ These can be programed independently by using said switch - so it is e.g. possib
|
||||
- 1 × SFP+: 1000 / 2500 / 10000 Mbps
|
||||
- **Power**: 12V DC, 1A barrel connector
|
||||
|
||||
<img src="photos/SWTG018AS_A_V_2_0/label.jpg" width="300" />
|
||||
<img src="photos/PCB-SWTG018AS-A-V2.0.1_19649/label.jpg" width="300" />
|
||||
|
||||
### What works
|
||||
The device is fully supported:
|
||||
@@ -41,11 +41,11 @@ The device is fully supported:
|
||||
|
||||
Top side
|
||||
|
||||
<img src="photos/SWTG018AS_A_V_2_0/pcb_top.jpg" width="300" />
|
||||
<img src="photos/PCB-SWTG018AS-A-V2.0.1_19649/pcb_top.jpg" width="300" />
|
||||
|
||||
Bottom
|
||||
|
||||
<img src="photos/SWTG018AS_A_V_2_0/pcb_bottom.jpg" width="300" />
|
||||
<img src="photos/PCB-SWTG018AS-A-V2.0.1_19649/pcb_bottom.jpg" width="300" />
|
||||
|
||||
### J1, serial console
|
||||
|
||||
+5
-5
@@ -1,12 +1,12 @@
|
||||
### SWTG024AS-A-V2.0.1_4C_2SFP
|
||||
It is highly similar to SWTG024AS-V2.0, with the only difference being the GPIO configuration for the SFP port.
|
||||
It is highly similar to PCB-SWTG024AS-V2.0_16895, with the only difference being the GPIO configuration for the SFP port.
|
||||
|
||||
## Brands
|
||||
|Brand |Type |Managed|PCB |Flash |Chip RTL|
|
||||
|---------|--------------|-------|------------------------------|----------------|--------|
|
||||
| Horaco | ZX-SG4T2 | No | PCB-SWTG024AS-A-V2.0.1_19650 | 512K (P25D40SH)| 8372N |
|
||||
| Horaco | HC-SWTG124AS | Yes | PCB-SWTG024AS-A-V2.0.1_19650 | 2M (W25Q16JV)| 8372N |
|
||||
| GoodTop | GT-ST024M | Yes | PCB-SWTG024AS-A-V2.0.1 | 2M | 8372N |
|
||||
| GoodTop | GT-ST024M | Yes | PCB-SWTG024AS-A-V2.0.1_19650 | 2M | 8372N |
|
||||
|
||||
### Label specifications
|
||||
|
||||
@@ -15,7 +15,7 @@ It is highly similar to SWTG024AS-V2.0, with the only difference being the GPIO
|
||||
- 4 × RJ45: 10/100/1000/2500 Mbps
|
||||
- 2 × SFP+: 1000 / 2500 / 10000 Mbps
|
||||
|
||||
<img src="photos/SWTG024AS-A-V2_0_1_19650/horaco-zx-sg4t2-label.jpg" width="300" />
|
||||
<img src="photos/PCB-SWTG024AS-A-V2.0.1_19650/horaco-zx-sg4t2-label.jpg" width="300" />
|
||||
|
||||
### What works
|
||||
The device is fully supported:
|
||||
@@ -29,11 +29,11 @@ The device is fully supported:
|
||||
|
||||
Top side
|
||||
|
||||
<img src="photos/SWTG024AS-A-V2_0_1_19650/horaco-zx-sg4t2-pcb-top.jpg" width="300" />
|
||||
<img src="photos/PCB-SWTG024AS-A-V2.0.1_19650/horaco-zx-sg4t2-pcb-top.jpg" width="300" />
|
||||
|
||||
Bottom
|
||||
|
||||
<img src="photos/SWTG024AS-A-V2_0_1_19650/horaco-zx-sg4t2-pcb-bottom.jpg" width="300" />
|
||||
<img src="photos/PCB-SWTG024AS-A-V2.0.1_19650/horaco-zx-sg4t2-pcb-bottom.jpg" width="300" />
|
||||
|
||||
On Horaco HC-SWTG124AS with board PCB-SWTG024AS-A-V2.0.1_19650 the reset button is soldered at `SW1` (on the top left, GPIO48).
|
||||
|
||||
@@ -10,12 +10,12 @@ Also the RJ45 connectors can be all plastic/non-shielded or with metal shielding
|
||||
|---|---|---|---|---|---|---|
|
||||
| LIANGUO |SWTG024AS |No| SWTG024AS-v2.0-17452 | CM-23-11-2336 023-17453| 512 KiB | 8272 |
|
||||
| Horaco |ZX-SWTG124AS | Yes | SWTG024AS-v2.0 | ??? | ??? | 8272 |
|
||||
| Xikestore |SKS3200M-4GPY2XF | Yes | SWTG024AS-v1.0 | CM-23-08-2043 023-16721 | 2048 KiB | 8272 |
|
||||
| Xikestore |SKS3200M-4GPY2XF | Yes | PCB-SWTG024AS-V2.0-17452 | CM-23-08-2043 023-16721 | 2048 KiB | 8272 |
|
||||
| Sodola | SL-SWTG124AS-D | Yes | SWTG024AS-v2.0-17452 | ??? | 2048 KiB | 8272 |
|
||||
|
||||
## PCB
|
||||
|
||||
<img src="photos/SWTG024AS-v2.0-unmanaged/SWTG024AS-v2.0-top-uman.png" width="300" />
|
||||
<img src="photos/SWTG024AS-V2.0-LIANGUO/SWTG024AS-v2.0-top-uman.png" width="300" />
|
||||
|
||||
# SWTG024AS-v2.0 managed vs unmanged
|
||||
Changes I found with my board vs [Managed version](https://github.com/up-n-atom/SWTG118AS/tree/main/photos/SWGT024AS-v2.0) of the PCB.
|
||||
@@ -1,4 +1,4 @@
|
||||
### SWTG024AS-V2.0
|
||||
### PCB-SWTG024AS-V2.0_16895
|
||||
|
||||
## Brands
|
||||
|Brand|Type|Managed|PCB|Flash|Chip RTL|
|
||||
@@ -13,7 +13,7 @@
|
||||
- 1 × SFP+: 1000 / 2500 / 10000 Mbps
|
||||
- **Power**: 12V DC, 1A 5525 connector
|
||||
|
||||
<img src="photos/SWTG024AS-V2.0/label.jpg" width="300" />
|
||||
<img src="photos/PCB-SWTG024AS-V2.0_16895/label.jpg" width="300" />
|
||||
|
||||
### What works
|
||||
The device is fully supported:
|
||||
@@ -24,15 +24,15 @@ The device is fully supported:
|
||||
### PCB overview
|
||||
|
||||
**Board markings**
|
||||
- Top silkscreen: PCB-SWTG024AS-V2.0
|
||||
- Top silkscreen: PCB-SWTG024AS-V2.0_16895
|
||||
|
||||
Top side
|
||||
|
||||
<img src="photos/SWTG024AS-V2.0/pcb_top.jpg" width="300" />
|
||||
<img src="photos/PCB-SWTG024AS-V2.0_16895/pcb_top.jpg" width="300" />
|
||||
|
||||
Bottom
|
||||
|
||||
<img src="photos/SWTG024AS-V2.0/pcb_bottom.jpg" width="300" />
|
||||
<img src="photos/PCB-SWTG024AS-V2.0_16895/pcb_bottom.jpg" width="300" />
|
||||
|
||||
### J1, serial console
|
||||
|
||||
@@ -14,7 +14,7 @@
|
||||
- **Power**: 1A @ 12V DC
|
||||
|
||||
#### Xikestore SKS-3200-4E2X label
|
||||
<img src="photos/SWTG024AS-V2.1.0/label.jpg" width="300" />
|
||||
<img src="photos/PCB-SWTG024AS-V2.1.0_19023/label.jpg" width="300" />
|
||||
|
||||
### What works
|
||||
- ALL 2.5GBASE-T RJ45 ports work at 10/100/1000/2500 Mbps
|
||||
@@ -24,15 +24,15 @@
|
||||
### PCB overview
|
||||
|
||||
**Board markings**
|
||||
- Top silkscreen: PCB-SWTG024AS-V2.1.0
|
||||
- Top silkscreen: PCB-SWTG024AS-V2.1.0_19023
|
||||
|
||||
Top side
|
||||
|
||||
<img src="photos/SWTG024AS-V2.1.0/pcb-top.jpg" width="300" />
|
||||
<img src="photos/PCB-SWTG024AS-V2.1.0_19023/pcb-top.jpg" width="300" />
|
||||
|
||||
Bottom
|
||||
|
||||
<img src="photos/SWTG024AS-V2.1.0/pcb-bottom.jpg" width="300" />
|
||||
<img src="photos/PCB-SWTG024AS-V2.1.0_19023/pcb-bottom.jpg" width="300" />
|
||||
|
||||
### Serial console
|
||||
|
||||
@@ -0,0 +1,31 @@
|
||||
### ZX-MOKERLINK_ZX_SWTGW218AS
|
||||
|
||||
## Brands
|
||||
|Brand|Type|Managed|PCB|Flash|Chip RTL|
|
||||
|---|---|---|---|---|---|
|
||||
| Mokerlink | ZX-MOKERLINK_ZX_SWTGW218AS | Yes| PCB-SWTG118AS-V2.0-16029 | 2MB (FM25Q16A)| 8273N + 8224N |
|
||||
| Sodola | | | | | |
|
||||
| Horaco | HC-MOKERLINK_ZX_SWTGW218AS | Yes | SWTG118AS-V2.1 | 2MB | 8373 (non-N) |
|
||||
| XikeStor | SKS3200-8E1X | Yes | SWTG118AS-V2.1-17462 | 2MB (25Q16JVSIQ) | |
|
||||
|
||||
All boards in this table use `MACHINE=MOKERLINK_ZX_SWTGW218AS`. The Horaco HC-MOKERLINK_ZX_SWTGW218AS is also sold with the
|
||||
[PCB-SWTG018AS-A V2.0.1_19649](PCB-SWTG018AS-A-V2.0.1_19649.md) board, which needs a different firmware. Check the marking
|
||||
on the PCB before flashing.
|
||||
|
||||
The PHY and flash-chip models for the tested Horaco units remain unverified.
|
||||
|
||||
|
||||
## Photos
|
||||
|
||||
<img src="photos/PCB-SWTG118AS-V2.0-16029/front.png" width="800" />
|
||||
|
||||
<img src="photos/PCB-SWTG118AS-V2.0-16029/label.jpg" width="800" />
|
||||
|
||||
## PCB
|
||||
|
||||
See up'n'atom's Repo:
|
||||
|
||||
https://github.com/up-n-atom/SWTG118AS/blob/main/photos/SWTG118AS-v2.0/SWTG118AS-v2.0-pcb-top.JPG
|
||||
|
||||
https://github.com/up-n-atom/SWTG118AS/blob/main/photos/SWTG118AS-v2.0/SWTG118AS-v2.0-pcb-bottom.JPG
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Hasivo S1100P-8GT-1SX-S
|
||||
# Hasivo S1100P-8GT-1SX-73N-S-V1.01
|
||||
|
||||
RTL8373N switch with 8 × 2.5G RJ45 ports and 1 × SFP port. GD25Q16 2 MiB flash.
|
||||
|
||||
@@ -29,13 +29,13 @@ PoE is managed by an RTL8238B and a separate STC8H8K64U controller, not directly
|
||||
|
||||
Front panel:
|
||||
|
||||
|
||||
|
||||
|
||||
PCB top:
|
||||
|
||||
|
||||
|
||||
|
||||
PCB bottom:
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -22,21 +22,21 @@ RTL8373-based 8×2.5G PoE + 1×SFP switch.
|
||||
|
||||
Front panel:
|
||||
|
||||
<img src="photos/HASIVO_S1100WP-8GT-1SX-SE/front.jpg" width="600" />
|
||||
<img src="photos/S1100W-8GT-1SX_SE-V1.05/front.jpg" width="600" />
|
||||
|
||||
Label:
|
||||
|
||||
<img src="photos/HASIVO_S1100WP-8GT-1SX-SE/label.jpg" width="600" />
|
||||
<img src="photos/S1100W-8GT-1SX_SE-V1.05/label.jpg" width="600" />
|
||||
|
||||
### PCB overview
|
||||
|
||||
Top side:
|
||||
|
||||
<img src="photos/HASIVO_S1100WP-8GT-1SX-SE/pcb_top.jpg" width="600" />
|
||||
<img src="photos/S1100W-8GT-1SX_SE-V1.05/pcb_top.jpg" width="600" />
|
||||
|
||||
Bottom side:
|
||||
|
||||
<img src="photos/HASIVO_S1100WP-8GT-1SX-SE/pcb_bottom.jpg" width="600" />
|
||||
<img src="photos/S1100W-8GT-1SX_SE-V1.05/pcb_bottom.jpg" width="600" />
|
||||
|
||||
### Port layout
|
||||
|
||||
@@ -38,7 +38,7 @@ The two large ICs sit under soldered heatsinks, their markings are not readable.
|
||||
## Build
|
||||
|
||||
```
|
||||
make MACHINE=S25G1109FP_V1_3 CI=1
|
||||
make MACHINE=SIRIVISION_SR_S25G2109F CI=1
|
||||
```
|
||||
|
||||
The resulting image can be uploaded through the web interface (`System` page)
|
||||
@@ -129,20 +129,20 @@ globally administered address stored there is used instead.
|
||||
|
||||
Front panel:
|
||||
|
||||
|
||||
|
||||
|
||||
Label:
|
||||
|
||||
|
||||
|
||||
|
||||
PCB top side:
|
||||
|
||||
|
||||
|
||||
|
||||
PCB bottom side:
|
||||
|
||||
|
||||
|
||||
|
||||
Flash chip, GigaDevice 25Q16ESIG:
|
||||
|
||||
|
||||
|
||||
@@ -25,7 +25,7 @@ The device is fully supported:
|
||||
|
||||
Top side
|
||||
|
||||
<img src="photos/SIRIVISION_S25G2206FP_V1_1/dev_pcb_top.jpg" width="300" />
|
||||
<img src="photos/S25G2206FP-V1.1/dev_pcb_top.jpg" width="300" />
|
||||
|
||||
## Power supply
|
||||
|
||||
+1
-1
@@ -1,5 +1,5 @@
|
||||
### SWTG024AS-A-V2.0.1_5C_1SFP
|
||||
It is highly similar to SWTG024AS-V2.0, with the only difference being the GPIO configuration for the SFP port.
|
||||
It is highly similar to PCB-SWTG024AS-V2.0_16895, with the only difference being the GPIO configuration for the SFP port.
|
||||
|
||||
## Brands
|
||||
|Brand|Type|Managed|PCB|Flash|Chip RTL|
|
||||
@@ -18,13 +18,13 @@ ONT-S207CW-62TS-SE, Binardat 2G06-04210GSM (managed), and Binardat 2G06-04210GS
|
||||
### Binardat 2G06-04210GSM
|
||||
|
||||
**Front View:**
|
||||
<img src="photos/ONT-S207CW-Binardat-2G06-04210GSM/binardat-2g06-04210gsm-front.jpg" width="400" />
|
||||
<img src="photos/SWTG024AS-A-V2.0.1-ONT/binardat-2g06-04210gsm-front.jpg" width="400" />
|
||||
|
||||
**Back View:**
|
||||
<img src="photos/ONT-S207CW-Binardat-2G06-04210GSM/binardat-2g06-04210gsm-back.jpg" width="400" />
|
||||
<img src="photos/SWTG024AS-A-V2.0.1-ONT/binardat-2g06-04210gsm-back.jpg" width="400" />
|
||||
|
||||
**PCB View:**
|
||||
<img src="photos/ONT-S207CW-Binardat-2G06-04210GSM/binardat-2g06-04210gsm-pcb.jpg" width="400" />
|
||||
<img src="photos/SWTG024AS-A-V2.0.1-ONT/binardat-2g06-04210gsm-pcb.jpg" width="400" />
|
||||
|
||||
*Photos courtesy of [andreas5232](https://github.com/andreas5232) from [emesix/ONT-S207CW-62TS-SE#1](https://github.com/emesix/ONT-S207CW-62TS-SE/issues/1)*
|
||||
|
||||
@@ -17,17 +17,17 @@ Port 5 RJ45 is interfaced through a RTL8221B IC.
|
||||
|
||||
## Label (V2.0)
|
||||
|
||||
<img src="photos/ZX-SWTGW215AS-V2.0/label.jpg" width="300" />
|
||||
<img src="photos/SWTG115AS-V2.0/label.jpg" width="300" />
|
||||
|
||||
## PCB (V2.0)
|
||||
|
||||
<img src="photos/ZX-SWTGW215AS-V2.0/pcb_top.jpg" width="300" />
|
||||
<img src="photos/ZX-SWTGW215AS-V2.0/pcb_bottom.jpg" width="300" />
|
||||
<img src="photos/SWTG115AS-V2.0/pcb_top.jpg" width="300" />
|
||||
<img src="photos/SWTG115AS-V2.0/pcb_bottom.jpg" width="300" />
|
||||
|
||||
## PCB (V2.1)
|
||||
|
||||
<img src="photos/ZX-SWTGW215AS-V2.1/pcb-top.jpg" width="300" />
|
||||
<img src="photos/ZX-SWTGW215AS-V2.1/pcb-bottom.jpg" width="300" />
|
||||
<img src="photos/SWTG115AS-V2.1/pcb-top.jpg" width="300" />
|
||||
<img src="photos/SWTG115AS-V2.1/pcb-bottom.jpg" width="300" />
|
||||
|
||||
## Connectors
|
||||
|
||||
@@ -69,7 +69,7 @@ Port 5 RJ45 is interfaced through a RTL8221B IC.
|
||||
|
||||
This connector goes to U4 `I2C EEPROM` and U10 `SPI FLASH` (mappings identical to SWTG024AS).
|
||||
|
||||
For detailed Slave Interface functionality and protocol information, see [T3 documentation in SWTG024AS.md](SWTG024AS.md#t3-slave-interface).
|
||||
For detailed Slave Interface functionality and protocol information, see [T3 documentation in SWTG024AS.md](PCB-SWTG024AS-V2.0-17452.md#t3-slave-interface).
|
||||
|
||||
|`T3` pin|what|Signal|
|
||||
|---|---|---|
|
||||
@@ -109,7 +109,7 @@ For detailed Slave Interface functionality and protocol information, see [T3 doc
|
||||
|
||||
#### Notes
|
||||
* 1 pin is square shaped.
|
||||
* Mapping unverified but assumed the same as [LIANGUO SWTG024AS](SWTG024AS.md#t8).
|
||||
* Mapping unverified but assumed the same as [LIANGUO SWTG024AS](PCB-SWTG024AS-V2.0-17452.md#t8).
|
||||
|
||||
## Reset Circuit
|
||||
| Function | GPIO |
|
||||
@@ -121,7 +121,7 @@ For detailed Slave Interface functionality and protocol information, see [T3 doc
|
||||
|
||||
## GPIO
|
||||
|
||||
Note: T3/U4/U10-related signal annotations below are copied from [LIANGUO SWTG024AS T3 section](SWTG024AS.md#t3-slave-interface) as well as T8 port from [LIANGUO SWTG024AS T8 section](SWTG024AS.md#t8). They should be treated as assumed identical for ZX-SWTGW215AS as it has not been 100% confirmed true at the moment.
|
||||
Note: T3/U4/U10-related signal annotations below are copied from [LIANGUO SWTG024AS T3 section](PCB-SWTG024AS-V2.0-17452.md#t3-slave-interface) as well as T8 port from [LIANGUO SWTG024AS T8 section](PCB-SWTG024AS-V2.0-17452.md#t8). They should be treated as assumed identical for ZX-SWTGW215AS as it has not been 100% confirmed true at the moment.
|
||||
|
||||
| HEX VAL. | GPIO | Component / Purpose | Notes | | GPIO | Component / Purpose | Notes |
|
||||
| -------- | ------ | ---- | ---- | ---- | ---- | ---- | ---- |
|
||||
@@ -135,14 +135,14 @@ Note: T3/U4/U10-related signal annotations below are copied from [LIANGUO SWTG02
|
||||
| 00000080 | GPIO07 | | | | GPIO39 | J4-4 | SFP I2C SDA |
|
||||
| 00000100 | GPIO08 | | | | GPIO40 | J4-5 | SFP I2C SCL |
|
||||
| 00000200 | GPIO09 | | | | GPIO41 | | |
|
||||
| 00000400 | GPIO10 | | | | GPIO42 | U10-P6, U4-P6, T3-1 | SPI FLASH CLK / I2C-SCL (from [LIANGUO SWTG024AS](SWTG024AS.md#gpio)) |
|
||||
| 00000800 | GPIO11 | | | | GPIO43 | U10-P5, U4-P5, T3-3 | SPI FLASH DI/IO0 / I2C-SDA (from [LIANGUO SWTG024AS](SWTG024AS.md#gpio)) |
|
||||
| 00001000 | GPIO12 | | | | GPIO44 | U10-P2, T3-5 | SPI FLASH DO/IO1 (from [LIANGUO SWTG024AS](SWTG024AS.md#gpio)) |
|
||||
| 00002000 | GPIO13 | PORT1 LED GREEN | | | GPIO45 | U10-P1, T3-6 | SPI FLASH CS (from [LIANGUO SWTG024AS](SWTG024AS.md#gpio)) |
|
||||
| 00004000 | GPIO14 | PORT1 LED ORANGE | | | GPIO46 | T8-1 | (from [LIANGUO SWTG024AS](SWTG024AS.md#gpio)) |
|
||||
| 00008000 | GPIO15 | | | | GPIO47 | T8-5 | (from [LIANGUO SWTG024AS](SWTG024AS.md#gpio)) |
|
||||
| 00010000 | GPIO16 | PORT2 LED GREEN | | | GPIO48 | T8-3 | (from [LIANGUO SWTG024AS](SWTG024AS.md#gpio)) |
|
||||
| 00020000 | GPIO17 | PORT2 LED ORANGE | | | GPIO49 | T8-6 | (from [LIANGUO SWTG024AS](SWTG024AS.md#gpio)) |
|
||||
| 00000400 | GPIO10 | | | | GPIO42 | U10-P6, U4-P6, T3-1 | SPI FLASH CLK / I2C-SCL (from [LIANGUO SWTG024AS](PCB-SWTG024AS-V2.0-17452.md#gpio)) |
|
||||
| 00000800 | GPIO11 | | | | GPIO43 | U10-P5, U4-P5, T3-3 | SPI FLASH DI/IO0 / I2C-SDA (from [LIANGUO SWTG024AS](PCB-SWTG024AS-V2.0-17452.md#gpio)) |
|
||||
| 00001000 | GPIO12 | | | | GPIO44 | U10-P2, T3-5 | SPI FLASH DO/IO1 (from [LIANGUO SWTG024AS](PCB-SWTG024AS-V2.0-17452.md#gpio)) |
|
||||
| 00002000 | GPIO13 | PORT1 LED GREEN | | | GPIO45 | U10-P1, T3-6 | SPI FLASH CS (from [LIANGUO SWTG024AS](PCB-SWTG024AS-V2.0-17452.md#gpio)) |
|
||||
| 00004000 | GPIO14 | PORT1 LED ORANGE | | | GPIO46 | T8-1 | (from [LIANGUO SWTG024AS](PCB-SWTG024AS-V2.0-17452.md#gpio)) |
|
||||
| 00008000 | GPIO15 | | | | GPIO47 | T8-5 | (from [LIANGUO SWTG024AS](PCB-SWTG024AS-V2.0-17452.md#gpio)) |
|
||||
| 00010000 | GPIO16 | PORT2 LED GREEN | | | GPIO48 | T8-3 | (from [LIANGUO SWTG024AS](PCB-SWTG024AS-V2.0-17452.md#gpio)) |
|
||||
| 00020000 | GPIO17 | PORT2 LED ORANGE | | | GPIO49 | T8-6 | (from [LIANGUO SWTG024AS](PCB-SWTG024AS-V2.0-17452.md#gpio)) |
|
||||
| 00040000 | GPIO18 | PORT3 LED GREEN | | | GPIO50 | | |
|
||||
| 00080000 | GPIO19 | PORT3 LED ORANGE | | | GPIO51 | | |
|
||||
| 00100000 | GPIO20 | PORT4 LED GREEN | | | GPIO52 | | |
|
||||
@@ -177,7 +177,7 @@ Note: T3/U4/U10-related signal annotations below are copied from [LIANGUO SWTG02
|
||||
|
||||
## Notes
|
||||
|
||||
While [SWTG024AS.md](SWTG024AS.md) can be used as a general reference for hardware concepts and interface specifications, this device should not be assumed to be identical beside the difference implicitely highlighted below. Not all information has been validated for compatibility with the SWTG215AS. Consult the SWTG024AS documentation with caution and verify any critical details against this device's.
|
||||
While [SWTG024AS.md](PCB-SWTG024AS-V2.0-17452.md) can be used as a general reference for hardware concepts and interface specifications, this device should not be assumed to be identical beside the difference implicitely highlighted below. Not all information has been validated for compatibility with the SWTG215AS. Consult the SWTG024AS documentation with caution and verify any critical details against this device's.
|
||||
|
||||
## Flashing
|
||||
|
||||
@@ -1,31 +0,0 @@
|
||||
### ZX-SWTGW218AS
|
||||
|
||||
## Brands
|
||||
|Brand|Type|Managed|PCB|Flash|Chip RTL|
|
||||
|---|---|---|---|---|---|
|
||||
| Mokerlink | ZX-SWTGW218AS | Yes| SWTG118AS-V2.0-16029 | 2MB (FM25Q16A)| 8273N + 8224N |
|
||||
| Sodola | | | | | |
|
||||
| Horaco | HC-SWTGW218AS | Yes | SWTG118AS-V2.1 | 2MB | 8373 (non-N) |
|
||||
| XikeStor | SKS3200-8E1X | Yes | SWTG118AS-V2.1-17462 | 2MB (25Q16JVSIQ) | |
|
||||
|
||||
All boards in this table use `MACHINE=SWTGW218AS`. The Horaco HC-SWTGW218AS is also sold with the
|
||||
[SWTG018AS-A V2.0](SWTG018AS_A_V2_0.md) board, which needs a different firmware. Check the marking
|
||||
on the PCB before flashing.
|
||||
|
||||
The PHY and flash-chip models for the tested Horaco units remain unverified.
|
||||
|
||||
|
||||
## Photos
|
||||
|
||||
<img src="photos/SWTGW218AS-managed/front.png" width="800" />
|
||||
|
||||
<img src="photos/SWTGW218AS-managed/label.jpg" width="800" />
|
||||
|
||||
## PCB
|
||||
|
||||
See up'n'atom's Repo:
|
||||
|
||||
https://github.com/up-n-atom/SWTG118AS/blob/main/photos/SWTG118AS-v2.0/SWTG118AS-v2.0-pcb-top.JPG
|
||||
|
||||
https://github.com/up-n-atom/SWTG118AS/blob/main/photos/SWTG118AS-v2.0/SWTG118AS-v2.0-pcb-bottom.JPG
|
||||
|
||||
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
Loaded 100 of 139 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user