Merge pull request #723 from zoeimogen/main

SWTG024AS-V2.1.0 support (Xikestor SKS3200-4E2X, Sodola SL902-SWTG024AS)

doc/devices/SWTG024AS-V2.1.0.md

@@ -0,0 +1,48 @@
+### SWTG024AS-V2.1
+
+## Brands
+|Brand|Type|Managed|PCB|Flash|Chip RTL|
+|---|---|---|---|---|---|
+| Xikestor | SKS3200-4E2X    | Yes | PCB-SWTG024AS-V2.1.0_19023 | 25Q16A | 8372N |
+| Solola   | SL902-SWTG024AS | Yes | PCB-SWTG024AS-V2.1.0_19023 |        | 8372N |
+
+### Label specifications
+
+- **Ports**:
+  - 4 × RJ45: 10/100/1000/2500 Mbps
+  - 2 × SFP+: 1000/2500/10000 Mbps
+- **Power**: 1A @ 12V DC
+
+#### Xikestore SKS-3200-4E2X label
+<img src="photos/SWTG024AS-V2.1.0/label.jpg" width="300" />
+
+### What works
+- ALL 2.5GBASE-T RJ45 ports work at 10/100/1000/2500 Mbps
+- The SFP+ ports supports 1G, 2.5G and 10G modules.
+- LEDs work with the same indiciations as the OEM firmware.
+
+### PCB overview
+
+**Board markings**
+- Top silkscreen: PCB-SWTG024AS-V2.1.0
+
+Top side
+
+<img src="photos/SWTG024AS-V2.1.0/pcb-top.jpg" width="300" />
+
+Bottom
+
+<img src="photos/SWTG024AS-V2.1.0/pcb-bottom.jpg" width="300" />
+
+### Serial console
+
+The four-pin through-hole serial header can be seen to the right of the CPU heatsink in the photo above. It is labelled J1, with pin 1 (Indicated by a triangle on the silkscren) at the bottom. the pinout is also on the silkscreen:
+
+| Pin | Label  |
+|-----|--------|
+| 1   | TX     |
+| 2   | RX     |
+| 3   | GND    |
+| 4   | 3V3    |
+
+Adding a header is a few moments work with a soldering iron. Only pins 1-3 are required for serial port use, and the stock firmware outputs at 57600bps at boot.