Merge pull request #471 from ScApi/main

Add support for Goalake IG108 / Netcore GS9 / PB-2132 PCB

doc/devices/PB-2132.md

@@ -0,0 +1,53 @@
+# IG108
+
+Following is documentation for unmanaged switch marked as `IG108`.
+
+Original software is running UART on 9600 baud rate.
+
+Using SPI clamp in-board is the only method for initial installation.
+
+### Brands
+
+| Brand   | Type       | Managed | PCB        | Flash       | Chip RTL      |
+|---------|------------|---------|------------|-------------|---------------|
+| Goalake | IG108      | No      | PB-2132    | cFeon Q32A  | 8373N + 8224N |
+| Netcore | GS9        | No      | PB-2132    | cFeon Q32A  | 8373N + 8224N |
+
+### What works
+
+- All eight 2.5GBASE-T RJ45 ports at 10/100/1000/2500 Mbps
+- SFP port with 1G/2.5G/10G modules
+- LEDs
+
+### PCB overview
+
+**Board markings**
+
+- Top silkscreen: PB-2132
+
+Front Goalake:
+
+<img src="photos/PB-2132/case.jpg" width="600" />
+
+Label Goalake: 
+
+<img src="photos/PB-2132/label.jpg" width="600" />
+
+Top side:
+
+<img src="photos/PB-2132/PCB-top.jpg" width="600" />
+
+Bottom:
+
+<img src="photos/PB-2132/PCB-bottom.jpg" width="600" />
+
+### Serial console
+
+The PCB has unpopulated through-holes near the SFP Port, with description of each pin, works out of the box.
+
+- **Settings**: 115200 baud / 8N1 / 3.3V TTL
+
+### Power supply
+
+Input power is delivered via barell plug, `12V 1A` adapter was provided.
+

doc/supported_devices.md

@@ -6,6 +6,7 @@ The following devices have been tested and are fully working:
 | Ampcom   | WAM902-SWTG018AS| No      | [SWTG018AS-A V2.0](devices/SWTG018AS_A_V2_0.md)                           |       | 8 + 1 |
 | Davuaz   | Da-K6501W       | No      | [PCB-K0501W-V2.0](devices/K0501W_V2_0.md)                                 |       | 5 + 1 |
 | FOXNEO   | FNS-1200P       | No      | [PCB-K0402W-U13-V2.0](devices/FNS-1200P.md)                               | 2M    | 4 + 2 |
+| Goalake  | IG108           | No      | [PB-2132](devices/PB-2132.md)                                             | 4M    | 8 + 1 |
 | Hisource | Hi-K0402WS      | No      | [PCB-K0402WS-V3.0](devices/PCB-K0402WS-V3.0.md)                           |       | 4 + 2 |
 | Hisource | Hi-K0402WS      | No      | [PCB-K0402WS-V2.0](devices/PCB-K0402WS-V2.0.md)                           | 2M    | 4 + 2 |
 | Hisource | Hi-K0801WS      | No      | [PCB-KO801W-V2.0](devices/HI-K0801WS.md)                                  |       | 8 + 1 |
@@ -21,9 +22,11 @@ The following devices have been tested and are fully working:
 | keepLINK | KP-9000-9XHML-X | Yes     | [2M-PCB23-V3.1](devices/2M-PCB23-V3_1.md)                                 | 2M    | 8 + 1 |
 | LIANGUO  | SWTG024AS       | No      | [SWTG024AS-v2.0-17452](devices/SWTG024AS.md)                              | 0.5M  | 4 + 2 |
 | Lianguo  | ZX-SWTGW215AS   | Yes     | [PCB-SWTG115AS-V2.0 / PCB-SWTG115AS-V2.1](devices/SWTGW215AS.md)          | 2M    | 5 + 1 |
+| Lianguo  | HYWS-SGT0108S   | No      | [2G5F_20G_V1.01](devices/HYWS-SGT0108S.md)                                | 0.5M  | 8 + 1 |
 | Mokerlink| 2G040210GSM     | Yes     | [2M-PCB43-V1.1](devices/2M-PCB43-V1.1.md)                                 |       | 4 + 2 |
 | Mokerlink| ZX-SWTGW218AS   | Yes     | [SWTG118AS-V2.0-16029](devices/SWTGW218AS.md)                             | 2M    | 8 + 1 |
 | MokerLink| POE-2G080110GS  | No      | [2M-PCB51-ML-V1.1](devices/2M-PCB51-ML-V1_1.md)                           | 4M    | 8 + 1 |
+| Netcore  | GS9             | No      | [PB-2132](devices/PB-2132.md)                                             | 4M    | 8 + 1 |
 | Ruiying  | RY-4GT-2SX      | No      | [FG-4GT-2SX_V2.0](devices/FG-4GT-2SX_V2.0.md)                             | 4M    | 4 + 2 |
 | Ruiying  | RY-8GT-1SX      | No      | [FG-8GT-1SX](devices/FG-8GT-1SX.md)                                       | 1M    | 8 + 1 |
 | SiscoLink | SL-G0402F      | No      | [PCB-K0402WS-V3.0](devices/PCB-K0402WS-V3.0.md)                           |       | 4 + 2 |
@@ -33,7 +36,6 @@ The following devices have been tested and are fully working:
 | Xikestore| SKS3200M-4GPY2XF| Yes     | [SWTG024AS-v1.0](devices/SWTG024AS.md)                                    |       | 4 + 2 |
 | XikeStor | SKS3200-8E1X    | Yes     | [SWTG118AS-V2.1-17462](devices/SWTGW218AS.md)                             | 2M    | 8 + 1 |
 | Ztyuav   | Z-QWYT0402      | No      | [PCB-K0402WS-V3.0](devices/PCB-K0402WS-V3.0.md)                           |       | 4 + 2 |
-| Lianguo  | HYWS-SGT0108S   | No      | [2G5F_20G_V1.01](devices/HYWS-SGT0108S.md)                                | 0.5M  | 8 + 1 |
 
 For KP-9000-6XH-X2 / KP-9000-6XHML-X2 / Mokerlink 2G040210GSM devices, select
 the machine target by PCB revision. The ML/non-ML or managed/unmanaged label

machine.c

@@ -1226,7 +1226,46 @@ __code const struct machine machine = {
 			0x1a, 0x19, 0x1d, 0x1e, 0x1c,
 			0x1d, 0x20, 0x21 },
 };
+#elif defined MACHINE_PB_2132
+__code const struct machine machine = {
+	.machine_name = "PB-2132",
+	.isRTL8373 = 1,
+	.min_port = 0,
+	.max_port = 8,
+	.n_sfp = 1,
+	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
+	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
+	.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
 
+	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+	.sfp_port[0].pin_los = GPIO37,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 },
+
+	.reset_pin = GPIO_NA,
+
+	.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
+
+	.led_sets = {
+		{
+			/* LED0 = RJ45: Amber LED: 2.5G */
+			LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+			/* LED1 = RJ45: Green LED: 10M / 100M / 1000M */
+			LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+			0,
+			0
+		},
+		{
+			/* SFP+ single Green LED. */
+			LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT,
+			0,
+			0,
+			0
+		},
+	},
+ };
 #else
 	#error "Please select a machine type in machine.h"
 #endif

machine.h

@@ -46,6 +46,7 @@
 // #define MACHINE_FG_8GT_1SX
 // #define MACHINE_LIANGUO_HYWS_SGT0108S
 // #define MACHINE_POE_2G080110GS
+// #define MACHINE_PB_2132
 
 typedef struct {
 	// GPIO pins for SDA/SCL