diff --git a/doc/devices/TEG-S562.md b/doc/devices/TEG-S562.md
index 5122f4e..6a49427 100644
--- a/doc/devices/TEG-S562.md
+++ b/doc/devices/TEG-S562.md
@@ -14,10 +14,11 @@ The memory chip is `Winbond W25Q16JV` with 16M-bit size.
 1. 2.5G ports on all advertised speeds.
 2. SFP+ communication.
 3. Serial, Web UI.
+4. All LEDs
 
 ## Known issues
 
-1. LEDs are not initialized properly.
+None.
 
 ## PCB
 
@@ -136,8 +137,6 @@ GPIO mapping unknown.
 
 ## LEDs
 
-Leds are not yet working as in stock firmware. This will be handled later.
-
 Ports 1-4 are amber for 100M/1G links, Green for 2.5G.
 Port 5-6 are green for 10G/1G link. Both should flash on activity.
 
@@ -166,7 +165,7 @@ Voltage is made by a `APW8713` (U3).
 
 ### `3.3` Voltage
 
-Voltage is crated regulated by chip marke as `GoIAT` (U2).
+Voltage is crated regulated by chip marked as `GoIAT` (U2).
 
 ## SFP SPI
 
diff --git a/machine.c b/machine.c
index 8b8fdbf..14f2579 100644
--- a/machine.c
+++ b/machine.c
@@ -339,6 +339,22 @@ __code const struct machine machine = {
 	.sfp_port[1].sds = 1,
 	.sfp_port[1].i2c = { .sda = GPIO49_I2C_SDA1, .scl = GPIO48_I2C_SCL1 },
 	.reset_pin = GPIO_NA,
+	.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
+	.led_sets = {
+		{
+			0, // Unused
+			LEDS_2G5 | LEDS_LINK | LEDS_ACT, // Green
+			LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, // Amber
+			0 // Unused
+		},
+		{
+			0, // Unused
+			0, // Unused
+			LEDS_10G | LEDS_1G | LEDS_LINK | LEDS_ACT, // Green
+			0, // Unused
+		},
+	},
+
 };
 
 void machine_custom_init(void) { }