mirror of
https://github.com/logicog/RTLPlayground.git
synced 2026-08-30 14:52:51 +08:00
Add more options to Link configuration and status display
This commit is contained in:
logicog
+44
-19
@@ -409,6 +409,49 @@ void parse_mirror(void)
|
||||
}
|
||||
|
||||
|
||||
void parse_port(void)
|
||||
{
|
||||
print_string("\nPORT ");
|
||||
uint8_t p = cmd_buffer[cmd_words_b[1]] - '1';
|
||||
p = machine.phys_to_log_port[p];
|
||||
print_byte(p);
|
||||
if (cmd_words_b[2] > 0 && cmd_compare(2, "10m")) {
|
||||
print_string(" 10M\n");
|
||||
phy_set_speed(p, PHY_SPEED_10M);
|
||||
}
|
||||
if (cmd_words_b[2] > 0 && cmd_compare(2, "100m")) {
|
||||
print_string(" 100M\n");
|
||||
phy_set_speed(p, PHY_SPEED_100M);
|
||||
}
|
||||
if (cmd_words_b[2] > 0 && cmd_compare(2, "2g5")) {
|
||||
print_string(" 2.5G\n");
|
||||
phy_set_speed(p, PHY_SPEED_2G5);
|
||||
}
|
||||
if (cmd_words_b[2] > 0 && cmd_compare(2, "1g")) {
|
||||
print_string(" 1G\n");
|
||||
phy_set_speed(p, PHY_SPEED_1G);
|
||||
}
|
||||
if (cmd_words_b[2] > 0 && cmd_compare(2, "auto")) {
|
||||
print_string(" AUTO\n");
|
||||
phy_set_speed(p, PHY_SPEED_AUTO);
|
||||
}
|
||||
if (cmd_words_b[2] > 0 && cmd_compare(2, "off")) {
|
||||
print_string(" OFF\n");
|
||||
phy_set_speed(p, PHY_OFF);
|
||||
}
|
||||
if (cmd_words_b[2] > 0 && cmd_compare(2, "duplex")) {
|
||||
print_string(" DUPLEX\n");
|
||||
if (cmd_words_b[3] > 0 && cmd_compare(3, "full"))
|
||||
phy_set_duplex(p, 1);
|
||||
else
|
||||
phy_set_duplex(p, 0);
|
||||
}
|
||||
if (cmd_words_b[2] > 0 && cmd_compare(2, "show")) {
|
||||
phy_show(p);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
void parse_regget(void)
|
||||
{
|
||||
uint16_t reg = 0;
|
||||
@@ -664,25 +707,7 @@ void cmd_parser(void) __banked
|
||||
flash_region.len = 20;
|
||||
flash_write_bytes(flash_buf);
|
||||
} else if (cmd_compare(0, "port") && cmd_words_b[1] > 0) {
|
||||
print_string("\nPORT ");
|
||||
uint8_t p = cmd_buffer[cmd_words_b[1]] - '1';
|
||||
print_byte(p);
|
||||
if (cmd_words_b[2] > 0 && cmd_compare(2, "2g5")) {
|
||||
print_string(" 2.5G\n");
|
||||
phy_set_mode(p, PHY_SPEED_2G5, 0, 0);
|
||||
}
|
||||
if (cmd_words_b[2] > 0 && cmd_compare(2, "1g")) {
|
||||
print_string(" 1G\n");
|
||||
phy_set_mode(p, PHY_SPEED_1G, 0, 0);
|
||||
}
|
||||
if (cmd_words_b[2] > 0 && cmd_compare(2, "auto")) {
|
||||
print_string(" AUTO\n");
|
||||
phy_set_mode(p, PHY_SPEED_AUTO, 0, 0);
|
||||
}
|
||||
if (cmd_words_b[2] > 0 && cmd_compare(2, "off")) {
|
||||
print_string(" OFF\n");
|
||||
phy_set_mode(p, PHY_OFF, 0, 0);
|
||||
}
|
||||
parse_port();
|
||||
} else if (cmd_compare(0, "ip")) {
|
||||
print_string("Got ip command: ");
|
||||
if (!parse_ip(cmd_words_b[1]))
|
||||
|
||||
@@ -11,6 +11,7 @@
|
||||
/*
|
||||
* Define PHY pages
|
||||
*/
|
||||
#define PHY_MMD_PMAPMD 1
|
||||
#define PHY_MMD_AN 7
|
||||
#define PHY_SDS_CTRL 30
|
||||
#define PHY_MMD_CTRL 31
|
||||
|
||||
+169
-14
@@ -182,46 +182,201 @@ void phy_config_8224(void) __banked
|
||||
|
||||
|
||||
/*
|
||||
* Set Speed, duplex and flow control mode of a PHY
|
||||
* Set Speed of a PHY
|
||||
* See e.g. RTL8221B datasheet
|
||||
*/
|
||||
void phy_set_mode(uint8_t port, uint8_t speed, uint8_t flow_control, uint8_t duplex) __banked
|
||||
void phy_set_speed(uint8_t port, uint8_t speed) __banked
|
||||
{
|
||||
uint16_t v;
|
||||
phy_read(port, 0x1f, 0xa610);
|
||||
phy_read(port, PHY_MMD_CTRL, 0xa610);
|
||||
v = SFR_DATA_U16;
|
||||
if (speed == PHY_OFF) {
|
||||
phy_write(port, 0x1f, 0xa610, v | 0x0800);
|
||||
phy_write(port, PHY_MMD_CTRL, 0xa610, v | 0x0800);
|
||||
return;
|
||||
}
|
||||
// Port is on, make sure of it:
|
||||
if (v & 0x0800)
|
||||
phy_write(port, 0x1f, 0xa610, v & 0xf7ff);
|
||||
phy_write(port, PHY_MMD_CTRL, 0xa610, v & 0xf7ff);
|
||||
|
||||
if (speed == PHY_SPEED_AUTO) {
|
||||
// AN Advertisement Register (MMD 7.0x0010)
|
||||
phy_write(port, PHY_MMD_AN, 0x10, 0x1001); // bits 0-4: 0x1 (802.3 supported), Extended Next Page format used
|
||||
// bits 0-4: 0x1 (802.3 supported), Extended Next Page format used
|
||||
phy_write(port, PHY_MMD_AN, 0x10, 0x15e1);
|
||||
// Multi-GBASE-TBASE-T AN Control 1 Register (MMD 7.0x0020)
|
||||
phy_write(port, 0x07, 0x20, 0x6081); // bit 14: SLAVE, bit 13: Multi-Port device, bit 8: 2.5GBit available, 1: LD Loop timing enabled
|
||||
phy_write(port, 0x07, 0x00, 0x3200); // Restart AN
|
||||
// bit 14: SLAVE, bit 13: Multi-Port device, bit 8: 2.5GBit available, 1: LD
|
||||
phy_write(port, PHY_MMD_AN, 0x20, 0x6081);
|
||||
// GBCR (1000Base-T Control Register, MMD 31.0xA412)
|
||||
phy_modify(port, PHY_MMD_CTRL, 0xa412, 0x0000, 0x0200); // Loop timing enabled
|
||||
phy_write(port, PHY_MMD_AN, 0x00, 0x3200); // Restart AN
|
||||
} else {
|
||||
// AN Control Register (MMD 7.0x0000)
|
||||
phy_write(port, PHY_MMD_AN, 0x00, 0x2000); // Clear bit 12: No Autoneg, Set Extended Pages (bit 13)
|
||||
if (speed == PHY_SPEED_10M) {
|
||||
phy_write(port, PHY_MMD_AN, 0x20, 0x6001);
|
||||
phy_write(port, PHY_MMD_AN, 0x10, 0x1461);
|
||||
phy_modify(port, PHY_MMD_CTRL, 0xa412, 0x0200, 0x0000);
|
||||
} else if (speed == PHY_SPEED_100M) {
|
||||
phy_write(port, PHY_MMD_AN, 0x20, 0x6001);
|
||||
phy_write(port, PHY_MMD_AN, 0x10, 0x1581);
|
||||
phy_modify(port, PHY_MMD_CTRL, 0xa412, 0x0200, 0x0000);
|
||||
} else {
|
||||
// AN Advertisement Register (MMD 7.0x0010)
|
||||
phy_write(port, PHY_MMD_AN, 0x10, 0x1001); // bits 0-4: 0x1 (802.3 supported), Extended Next Page format used
|
||||
// bits 0-4: 0x1 (802.3 supported), Extended Next Page format used
|
||||
phy_write(port, PHY_MMD_AN, 0x10, 0x1001);
|
||||
if (speed == PHY_SPEED_1G) {
|
||||
// Multi-GBASE-TBASE-T AN Control 1 Register (MMD 7.0x0020)
|
||||
phy_write(port, PHY_MMD_AN, 0x20, 0x6001); // bit 14: SLAVE, bit 13: Multi-Port device, 1: LD Loop timin enableed
|
||||
// bit 14: SLAVE, bit 13: Multi-Port device, 1: LD Loop timin enableed
|
||||
phy_write(port, PHY_MMD_AN, 0x20, 0x6001);
|
||||
// GBCR (1000Base-T Control Register, MMD 31.0xA412)
|
||||
phy_modify(port, 0x1f, 0xa412, 0x0000, 0x0200);
|
||||
phy_modify(port, PHY_MMD_CTRL, 0xa412, 0x0000, 0x0200);
|
||||
} else if (speed == PHY_SPEED_2G5) {
|
||||
// Multi-GBASE-TBASE-T AN Control 1 Register (MMD 7.0x0020)
|
||||
phy_write(port, PHY_MMD_AN, 0x20, 0x6081); // bit 14: SLAVE, bit 13: Multi-Port device, bit 8: 2.5GBit available, 1: LD Loop timin enableed
|
||||
// bit 14: SLAVE, bit 13: Multi-Port device, bit 8: 2.5GBit available, 1: LD Loop timin enableed
|
||||
phy_write(port, PHY_MMD_AN, 0x20, 0x6081);
|
||||
// GBCR (1000Base-T Control Register, MMD 31.0xA412)
|
||||
phy_modify(port, 0x1f, 0xa412, 0x0200, 0x0000);
|
||||
phy_modify(port, PHY_MMD_CTRL, 0xa412, 0x0200, 0x0000);
|
||||
}
|
||||
phy_write(port, PHY_MMD_AN, 0x00, 0x3200); // Enable AN
|
||||
}
|
||||
phy_write(port, PHY_MMD_AN, 0x00, 0x3000); // Enable AN
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
void phy_set_duplex(uint8_t port, uint8_t fullduplex) __banked
|
||||
{
|
||||
uint16_t v;
|
||||
phy_read(port, PHY_MMD_AN, 0x00);
|
||||
v = SFR_DATA_U16;
|
||||
if (!(v & 0x1000)) { // AN disabled, we are in forced mode
|
||||
phy_read(port, PHY_MMD_CTRL, 0xa400);
|
||||
v = SFR_DATA_U16;
|
||||
if (fullduplex)
|
||||
v |= 0x0100;
|
||||
else
|
||||
v &= 0xfeff;
|
||||
phy_write(port, PHY_MMD_CTRL, 0xa400, v);
|
||||
return;
|
||||
}
|
||||
// Disable AN
|
||||
phy_write(port, PHY_MMD_AN, 0x00, 0x2000);
|
||||
phy_read(port, PHY_MMD_AN, 0x10);
|
||||
v = SFR_DATA_U16;
|
||||
if (v & 0x0060) {
|
||||
if (fullduplex)
|
||||
phy_modify(port, PHY_MMD_AN, 0x10, 0xffbf, 0x0040);
|
||||
else
|
||||
phy_modify(port, PHY_MMD_AN, 0x10, 0xffdf, 0x0020);
|
||||
}
|
||||
if (v & 0x0180) {
|
||||
if (fullduplex)
|
||||
phy_modify(port, PHY_MMD_AN, 0x10, 0xfeff, 0x0100);
|
||||
else
|
||||
phy_modify(port, PHY_MMD_AN, 0x10, 0xff7f, 0x0080);
|
||||
}
|
||||
// Restart AN
|
||||
phy_write(port, PHY_MMD_AN, 0x00, 0x3000);
|
||||
}
|
||||
|
||||
|
||||
void phy_show(uint8_t port) __banked
|
||||
{
|
||||
uint16_t v;
|
||||
|
||||
phy_read(port, PHY_MMD_AN, 0x00);
|
||||
v = SFR_DATA_U16;
|
||||
if (!(v & 0x1000)) { // AN disabled, we are in forced mode
|
||||
phy_read(port, PHY_MMD_PMAPMD, 0);
|
||||
v = SFR_DATA_U16;
|
||||
print_string("\nForced speed: "); print_short(v); write_char('\n');
|
||||
uint8_t s1 = ((v & 0x40) ? 0x2 : 0x0) | ((v & 0x2000) ? 0x1 : 0x0);
|
||||
uint8_t s2 = (v >> 2) & 0xf;
|
||||
print_string("s1, s2: "); print_byte(s1); write_char(' '); print_byte(s2); write_char('\n');
|
||||
switch(s1) {
|
||||
case 0:
|
||||
print_string("10M\n");
|
||||
break;
|
||||
case 1:
|
||||
print_string("100M\n");
|
||||
break;
|
||||
case 2:
|
||||
print_string("1000M\n");
|
||||
break;
|
||||
case 3:
|
||||
switch (s2) {
|
||||
case 0:
|
||||
print_string("10G\n");
|
||||
break;
|
||||
case 6:
|
||||
print_string("2500M\n");
|
||||
break;
|
||||
case 7:
|
||||
print_string("5G\n");
|
||||
break;
|
||||
default:
|
||||
print_string("Unknown\n");
|
||||
break;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
print_string("Unknown\n");
|
||||
}
|
||||
phy_read(port, PHY_MMD_CTRL, 0xa400);
|
||||
v = SFR_DATA_U16;
|
||||
print_string("Duplex: "); print_short(v); print_string(" enabled: ");
|
||||
if (v & 0x100)
|
||||
print_string("yes");
|
||||
else
|
||||
print_string("no");
|
||||
write_char('\n');
|
||||
|
||||
} else {
|
||||
print_string("\nAN enabled, advertising:");
|
||||
phy_read(port, PHY_MMD_AN, 0x10);
|
||||
v = SFR_DATA_U16;
|
||||
if (v & 0x0040)
|
||||
print_string(" 10Base-Half");
|
||||
if (v & 0x0040)
|
||||
print_string(" 10Base-Full");
|
||||
if (v & 0x0080)
|
||||
print_string(" 100Base-Half");
|
||||
if (v & 0x0100)
|
||||
print_string(" 100Base-Full");
|
||||
phy_read(port, PHY_MMD_CTRL, 0xa412);
|
||||
v = SFR_DATA_U16;
|
||||
if (v & 0x0200)
|
||||
print_string(" 1000Base-Full");
|
||||
phy_read(port, PHY_MMD_AN, 0x10);
|
||||
v = SFR_DATA_U16;
|
||||
if (v & 0x0080)
|
||||
print_string(" 2500BaseN-Full");
|
||||
|
||||
}
|
||||
phy_read(port, PHY_MMD_AN, 0x13);
|
||||
v = SFR_DATA_U16;
|
||||
print_string("\nLink Partner advertises:");
|
||||
if (v & 0x0020)
|
||||
print_string(" 10Base-Half");
|
||||
if (v & 0x0040)
|
||||
print_string(" 10Base-Full");
|
||||
if (v & 0x0080)
|
||||
print_string(" 100Base-Half");
|
||||
if (v & 0x0100)
|
||||
print_string(" 100Base-Full");
|
||||
phy_read(port, PHY_MMD_CTRL, 0xa414);
|
||||
v = SFR_DATA_U16;
|
||||
if (v & 0x0400)
|
||||
print_string(" 1000Base-Half");
|
||||
if (v & 0x0800)
|
||||
print_string(" 1000Base-Full");
|
||||
phy_read(port, PHY_MMD_AN, 33);
|
||||
v = SFR_DATA_U16;
|
||||
if (v & 0x0020)
|
||||
print_string(" 2500Base-Full");
|
||||
if (v & 0x0040)
|
||||
print_string(" 5000Base-Full");
|
||||
if (v & 0x0800)
|
||||
print_string(" 10GBase-Full");
|
||||
write_char('\n');
|
||||
}
|
||||
|
||||
|
||||
|
||||
+10
-4
@@ -1,15 +1,21 @@
|
||||
#ifndef _RTL837X_PHY_H_
|
||||
#define _RTL837X_PHY_H_
|
||||
|
||||
#define PHY_SPEED_AUTO 0x1
|
||||
#define PHY_SPEED_1G 0x2
|
||||
#define PHY_SPEED_2G5 0x3
|
||||
#define PHY_SPEED_10M 0x2
|
||||
#define PHY_SPEED_100M 0x3
|
||||
#define PHY_SPEED_1G 0x4
|
||||
#define PHY_SPEED_2G5 0x5
|
||||
#define PHY_SPEED_5G 0x6
|
||||
#define PHY_SPEED_10G 0x7
|
||||
#define PHY_SPEED_AUTO 0x10
|
||||
#define PHY_OFF 0xff
|
||||
|
||||
void rtl8224_phy_enable(void) __banked;
|
||||
void phy_config(uint8_t phy) __banked;
|
||||
void phy_config_8224(void) __banked;
|
||||
void phy_set_mode(uint8_t port, uint8_t speed, uint8_t flow_control, uint8_t duplex) __banked;
|
||||
void phy_set_speed(uint8_t port, uint8_t speed) __banked;
|
||||
void phy_set_duplex(uint8_t port, uint8_t fullduplex) __banked;
|
||||
void phy_show(uint8_t port) __banked;
|
||||
void phy_reset(uint8_t port) __banked;
|
||||
|
||||
#endif
|
||||
|
||||
Reference in New Issue
Block a user