From 1344e02fb7fbfadbd8a43d9db95b486729cc52cb Mon Sep 17 00:00:00 2001 From: Robert Klauco Date: Sat, 17 Oct 2026 12:40:00 +0200 Subject: [PATCH] Update ONT-S207CW-62TS-SE.md Updated the readme to differentiate between identifier tag and the compilation command. Added also a line for flashing using GUI. --- doc/devices/ONT-S207CW-62TS-SE.md | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/doc/devices/ONT-S207CW-62TS-SE.md b/doc/devices/ONT-S207CW-62TS-SE.md index 7434013a..660d1c30 100644 --- a/doc/devices/ONT-S207CW-62TS-SE.md +++ b/doc/devices/ONT-S207CW-62TS-SE.md @@ -8,7 +8,7 @@ ONT-S207CW-62TS-SE, Binardat 2G06-04210GSM (managed), and Binardat 2G06-04210GS - **Ports:** 4x 2.5G RJ45 + 2x 10G SFP+ - **Console:** 115200 baud (RTLPlayground firmware) / 9600 baud (stock firmware) -**Note:** These devices are **RTL8372N-based** with **LAN ports mounted upside-down on the PCB**, requiring a custom configuration. The `MACHINE=ONT_S207CW_62TS_SE` definition uses a **custom configuration** with: +**Note:** These devices are **RTL8372N-based** with **LAN ports mounted upside-down on the PCB**, requiring a custom configuration. The `MACHINE_ONT_S207CW_62TS_SE` definition uses a **custom configuration** with: - Corrected port mapping (physical ports 1-4 = RJ45, 5-6 = SFP) - Optimized LED sets for different port wiring (RJ45 Ports 1-2 have reversed LED wiring) - Custom LED mux configuration @@ -90,6 +90,8 @@ Custom mapping for ONT-S207CW-62TS-SE: ## Flashing Instructions See the [README.md](../../README.md) for general flashing instructions. +For compilation, use command `make MACHINE=ONT_S207CW_62TS_SE` to specify the machine. +If you are using managed version of the switch, you can then also compile the installer and flash using GUI - run command `cd installer` and finally `make`. ## Stock Firmware Information